10000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB)

10000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB)

Product Ref: PW.2.5x2x2.IFB

Customer Offloading GRP WRAS Approved Made to Order, Non Returnable Product Made to Order, Non Returnable Product Yes
  • Volume: 10000ltr
  • Weight: 0.010kg
  • Dimensions: D:2920mm W:2400mm H:2207mm
  • Home Delivery

    UK mainland delivery from £188.00 ex VAT

    check delivery cost

    from £4,916.00 ex VAT
    (£5,899.20 inc VAT)
    Downloadable documents

    pdfTechnical Drawing PW.2.5x2x2.IFB

    Product Description

    10000 Litre Sectional Water Tank, Internally Flanged Base (IFB)

    10000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly. Comes with manway access

    Insulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.

    IFB tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. 

    IFB tanks require a minimum of 500mm working clearance all around the tank, a minimum of 500mm above the man-way height and/or 350mm above any raised float valve housing. 

    Optional Extras:
    Screened lid vent
    Screened overflow ¾' (22mm) up to 4" 
    Screened warning pipe ¾' (22mm)
    BSP female tank connector ?" up to 4" 
    Lid mounted level switch to suit high or low warning Temperature sensor

    Important: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. 

    An Internally Flanged Base Tank (IFB) is the most cost effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.

    Applications where there is sufficient working room all around the tank.

    Comprising: Internally flanged base, externally flanged sides, internally flanged roof. 

    Insulated to the sides and cover only.

    Insulation: 25mm Fully Encapsulated to Sides
    Panel Size: 1000 x 1000mm
    Side Panels: Externally Flanged
    Base Panels: Internally Flanged
    Heavy Duty Lid: Internally Flanged
    Internal fixings: Stainless Steel
    External fixings: Galvanised
    Manway: Included providing 800 x 800mm access opening
    Foundation Levelling Steels:     Included (To suit flat structural foundation pad)
    Water can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.
    Annual Disinfection Information and Options

    • Designed for easy installation, saving time and money
    • We can offer monthly, yearly and fixed priced packages ranging from 1-3 years
    • All work is carried out by CSCS qualified engineers
    • Tank upgrade works available, bringing the old tanks up to current regulations
    • Full tank replacement works available
    • Legionella risk assessments including schematic drawings if required
    • Microbiology analysis - water sampling via UKAS approved laboratories
    • Building flush and mains injection
    • Commissioning of booster sets
    • Servicing of water softners and booster sets
    • Replacement of hollow roof struts.
    • Insulating of existing cold water storage tanks


    Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

    Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK,G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

    Our lead times should only be used as a guide and are subject to change.


    Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

    We recommend installers and/or plant hire & materials for install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

    If you have any questions regarding your delivery please contact the Sales Team on 01643 703358.

    Returns Information

    Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to 4.6 & 4.7. **

    Please be aware that returning a tank can be complicated and expensive so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

    If you wish to return goods, please complete the form on this page to provide further information.

    Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

    Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

    Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

    Please click here to request a return

    Product Specification

    • Product Code: PW
    • Customer Offloading: Customer Offloading
    • Material: GRP
    • Potable: WRAS Approved
    • Stock tank: Made to Order, Non Returnable Product
    • WRAS: Yes
    • WRAS Approved: Yes

    People who bought this also bought...

    2' BSP Female Tank Connector2' BSP Female Tank Connector
    2' BSP Female Tank Connector
    £64.00 ex VAT
    (£76.80 inc VAT)