1.5' Single Pump Booster Set, Fixed Speed 180 l/min @ 3.5 Bar

 

Product Ref: 1FM10-4M/TD

Free Delivery WRAS Approved WRAS Approved Parts

Home Delivery

UK mainland delivery from FREE ex VAT

check delivery cost

updown
from £765.00 ex VAT
(£918.00 inc VAT)

What is involved in the Commissioning

Standard commissioning process

  • Mount panel into the kiosk or suitable housing location supplied / identified by others.
  • Drop draw cords down the 110mm cable duct already installed by others.
  • Lower the pumps down the guide rails onto the pedestals and ensure correct position.
  • Pull through the float and pump cables, if a cable extension is needed, this is extended within the chamber via a junction box and pulled through with a multicore cable.
  • Take a electricity supply from a type C32 rotary isolator at the location of the panel.
  • Connect the power to the control panel along with the 2 pump cables and the 4 control float cables.
  • Set floats are the required heights to correspond with the inlet level.
  • Fill the pump station if not already full.
  • Power up the control panel and turn each pump into manual using the dials to amp test each pump and set the Lmax overload setting.
  • Set the dials to auto and continue to fill to test standard operation
  • Remove air locks if necessary
  • Check duty assist and high level alarm function
  • Leave the system in full working order

Product Description

Fixed Speed Single Pump Booster


The Tanks Direct single pump constant pressure cold water booster set, is designed to increase the pressure of water services within a building where the existing incoming main is not sufficient. If the supply of water fails during operation the pump automatically shuts down to prevent damage and re-starts again once water is restored. The pressure boosters are suitable for private water supply applications, particularly where constant pressure is required or where there are large fluctuations in demand.


Key Benefits

  • 304 Stainless steel WRAS approved pumps
  • BMS Volt Free Contacts
  • Fixed speed inverter
  • Dry run protection
  • PWB 8 litres WRAS approved pressure vessel
  • Glycerine filled pressure gauge
  • Tested and programmed prior dispatch
  • Stainless steel Fittings
  • Available in twin and triple set options


Tanks Direct also supply variable domestic & commercial twin and triple pumps, please contact us on 01643 703358.

 

Delivery

All our Booster pumps are for delivery by customer offload. This entails the customer to acquire the right manpower and/or machinery to help unload the tank/s from the delivery vehicle.

If you require any specific requirements regarding delivery, please call us before order is placed, where we will try and accommodate this facility for you.

Product Details

  • Product Code: DPT
  • Delivery: Free Delivery
  • Potable: WRAS Approved
  • Twin or Single: Single
  • WRAS: WRAS Approved Parts

Delivery

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Returns Information

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.

People who bought this also bought...