Single Zone Breeam Water Leak Detector, Leaksaver1

Leaksaver1 Single Zone

Breeam Water Leak Detector - Single Zone Leaksaver1

The LeakSaver 1 is a leak detection system which is capable of detecting a major water leak on the mains water supply within a building. It monitors the amount of water passing into the building over a set period of time. Should this amount be exceeded it will create an alarm. It is used when the exterior wall of the building is effectively the boundary as it is situated adjacent to the street, such as an office building in a city centre and when the mains cold water enters more than one building with the exterior pipe work teeing off into each one. The LeakSaver1 can be used for "Water Monitoring'. The aim of WAT02 is to manage water and encourage reductions in consumption. A pulsed water metre is required on all mains supplies and on the supply to any building using more than 10% of the total water consumption. The LeakSaver1 connects to the water metre and to the Building Management System to monitor the amount of water used.

The system has been designed to meet all of the WAT03 requirements for water leak detection and prevention, the main key features are:
An alarm is raised when the flow of water (measured using pulsed water metres) exceeds a pre-set maximum for a pre-set period of time. It is able to identify different flow rates by programming high and/or low levels over different time periods. The LeakSaver1 is fully programmable to suit the users water consuming requirements. It also has the ability to avoid false alarms when larger volumes of water are called for.

This panel has been developed the LeakSaver1 to help take the complexities of specifying a system for BREEAM water leak detection away. We have the experience and expertise to provide the right system for your project, minimising the risk of installing the wrong thing. Contact us for an instant quotation.
Note: As part of BREEAM WAT03 it is possible to gain an extra credit by fitting a flow control device to each WC area. We can offer a have a "FlowBlocker' system designed to do this. 
Single zone systems for leak detection on internal pipework only. Used where the boundary of the building is an exernal wall such as an office building in a city centre. Also used where the mains cold water enters more than one building. Designed to help achieve the requirements of BREEAM WAT02/03 for water monitoring and leak detection.

Able to identify different flow rates by programming high and low flow levels allowing for different occupancies at different times of the day. The LeakSaver is fully programmable to suit the users requirements. Larger volumes of water can be called for without causing a false alarm.

Cost effective solution, easy to implement to help gain a BREEAM credit.

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.