Flood Mate 1 - Emergency Flood Pump Kit
This emergency pumping kit, has a powerful pump, two packs of Hydrosacks and discharge hoses for defending a property from low level flooding. Depending on which kit is selected, the pump is designed to pump water levels down to a level of between 3mm and 1mm. Hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency. Supplied in a sturdy easy-carry case, there is sufficient space within to not only store the pumping equipment but keep other flood protection products e.g. emergency grab bags, emergency meals etc.
Flood Mate 1 Kit Contains:
Phase 1 hose kit: 10 metres of 25mm (1”) non-kink pipe with quick release connectors. Ideal for pumping near the property e,g. over window ledges, steps, walls, Hydrosacks, sandbags etc.
Phase 2 hose kit: 10 metres of 25mm (1”) lay-flat pipe with quick release connectors. Ideal pumping over flat surfaces e.g. over ground, away from the property.
Easy carry case with lid and 2 fastening straps (400Wx600Lx 420H).
BS100 Pump Information
A 230 volt submersible pump with a 100watt motor (“uptake” for generator: 220 watt). It weighs 3.5kgs(dry) and comes with a quick release hose connector, 10 metres of power cable and a plug for immediate use. The BS100 will pump approximately 40 litres per minute across 30 metres of level ground when using 25mm (1”) hose. No initial priming required before starting, it will pump water down to 3mm.
Please note that this pump must not run dry.
To use the shipping estimator please select the * Required Fields (if applicable) shown on product above, then enter the quantity required (below) to obtain a carriage estimate.
Please call us for delivery to postcodes in Wales, Scotland, Highlands and Islands.