Featured Products
Poly-Air Activated Carbon Vent Filter
(£83.99 inc VAT)
Poly-Air Activated Carbon Vent Filter
This activated carbon vent filter can remove offensive odours such as hydrogen sulphide as they exit the sewer pipe network through vent pipes. This filter will eliminate these unpleasant odours.
Odours from the sewer pipe network and septic tanks are frequent but often a random nuisance problem in home, work or elsewhere. All sewer pipe networks and septic...
£69.99 ex VAT (£83.99 inc VAT)
BD/BE BEARING BUSH HALF x 2no
BD/BE Bearing Bush Half x 2no
This is a bearing bush half for a 40mm Diameter shaft. Suitable for Klargester BD/BE Biodisc. We recommend this is ordered with part 0002820
Comes as a pair of 2no
BD/BE Bearing Housing
BD/BE Bearing Housing
The BD/BE Half Bearing is suitable for 40mm diameter shafts in all Klargester BD/BE BioDisc Sewage Treatment Systems.
This listing is for one single half bearing (Each Biodisc contains 2)
BD/BE Bottom Pulley for Biodisc
BD BioDisc Bottom Pulley
The BD BioDisc Bottom Pulley fits the main media shaft on all Klargester BD BioDisc Sewage Treatment Systems.
A BD BioDisc Locking Element is also available separately, to lock the sprocket onto the shaft.
BD/BE Top Pulley for Biodisc
Top Pulley for BD/BE BioDisc Sewage Treatment Plant
Top Pulley suitable for the motor shaft of the Klargester BD/BE BioDisc Sewage Treatment Plant
17 Teeth
5/8" Pitch
F7 Tolerance
20mm Wide High Torque Drive Pulley
Bored 20mm
Grubscrew Supplied
British Standard Keyway
BF BIODISC COVER ASSEMBLY
BF BIODISC COVER ASSEMBLY
BF Bottom Pulley for Biodisc
BF Bottom Pulley for Biodisc
The BF BioDisc Bottom Pulley fits the main media shaft on all Klargester BF BioDisc Sewage Treatment Systems.
A BF BioDisc Locking Element is also available separately, to lock the sprocket onto the shaft.
BF TOP PULLEY BIODISC
BF-TOP-PULLEY-BIODISC
The BF top pulley is a standard width top pulley suitable to fit the motor shaft on a Klargester BG BioDisc Sewage Treatment Systems.
The BF top pulley comes with a grub screw to lock into position
17T 5/8 Inch Duplex Pinion bored 25 mm F7
BF/BG LOCKING ELEMENT
BF Bottom Pulley Locking Element
This locking element can be used both on the BF and the BG sewage treatment systems. It is used to clamp the bottom pulley onto the main shaft.
Biosafe Key
Biosafe Key Description
Keys used for Biosafe Tanks
Biotec P12 Screen Assembly
Biotec P12 Screen Assembly
This is a baffle that separates the primary settlement tank and the second chamber, comes complete with:
1no Airlift Baffle
2no Scum Baffles
8no Rivet Tap
Made from GRP (Glass Reinforced Plastic)
Biotec P6 Screen Assembly
Biotec P6 Screen Assembly
This is a baffle that separates the primary settlement tank and the second chamber, it comes complete with:
1no Airlift Baffle
2no Scum Baffles
8no Rivet Tap
Made from GRP (glass Reinforced Plastic)
Brush Fitment
Brush Fitment
Brush Fitment used to help dispense grease onto the chain of Biodisc BD to BG sewage treatment units.
Natural bristles 40mm long
20mm Ø - overall length 70mm
C1337 Mann Filter
C1337 Mann Filter
C1337 Filter, for filtering destructive particles such as dust, pollen, sand, soot and even drops of water out of the intake air.
Height: 125mm
OD/Width Max: 128mm
OD/Width Min: 128mm
ID/Depth Max: 64mm
ID/Depth Min: 64mm
Capacitor for Bauer BG10Z Motor
Capacitor for Bauer BG10Z Motor
8SL Microfarad Motor Run Capacitor used on the BG10Z Bauer Motor Gearbox.
This motor is used on BC, BD & BE BioDisc sewage treatment systems
Capacitor-10sl-bf-motor-gearbox
Capacitor-10sl-bf-motor-gearbox
10SL Microfarad Motor Run Capacitor used on the Bauer 2000 Series helical geared motor (BF Motor.Gearbox)
This Bauer Motor/Gearbox is used with the Klargester BF Biodisc sewage treatment systems.
CLP6 SPANNER KEY
CLP6 Spanner Key
To be used on the Bioficient Units
Dry Guard BA/BB/BC BioDisc
Dry Guard BA/BB/BC BioDisc
The dry guard fits to the gearbox support beam and protects the pulley system from water ingress.
Suits BA, BB & BC BioDisc's
Duplex Chain Link (To Suit BD/BE/BF)
Duplex Chain Link
To Suit BD/BE/BF DUPLEX DRIVE CHAIN
(Remember to use good quality grease to lubricate the chain when required.)
Duplex Chain Link (To Suit BG)
Duplex Chain Link
To Suit BG DUPLEX DRIVE CHAIN
(Remember to use good quality grease to lubricate the chain when required.)
ET-150 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-150 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
Charles Austen recommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure it's the correct kit for your blower.
ET-250 CHARLES AUSTEN BLOWER SERVICE KIT
ET-250 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-250 Charles Austen Blower service kit for the includes:-
4 Diaphragms
1 Filter
16 Valves
Charles Austen recommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure it's the correct kit for your blower.
ET-40 CHARLES AUSTEN BLOWER SERVICE KIT
ET-40 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-40 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen recommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure it's the correct kit for your blower.
Grease Adaptor Kit BD-BF BioDisc
Grease Adaptor Kit BD-BF BioDisc
Grease Adaptor Kit for Biodisc BD-BF.
Kingspan Control Panel Stand
Kingspan Control Panel Stand
Mild steel, galvanised angle iron stand for our new treatment tank control panel
Klargester BA BioDisc Shaft
Klargester BA BioDisc Shaft
Complete shaft to suit Klargester BA - 25mm
Klargester BA/BB Bearing Retaining Plate
Klargester BA/BB Bearing Retaining Plate
Bearing retaining plate for non-drive end on BioDisc BA/BB/BAX.
Klargester BC Biodisc Shaft
Klargester BC Biodisc Shaft
Shaft only to suit BC biodisc rotor
Klargester BD Biodisc Shaft
Klargester BD Biodisc Shaft
Shaft only to suit BD biodisc rotor
M30 Nylon Washer
M30 Nylon Washer
Nylon washer for NDE bearing fixing on a BC Biodisc
Magnet Only - Loss of Rotation
Magnet Only - Loss of Rotation
Magnet for Loss of Rotation Alarm on a BioDisc.
If you need the full kit see below :-
Kingspan Parts Loss of Rotation Kit - Tanks Direct (tanks-direct.co.uk)
NON-RETURN VALVE
Non-return valve for BD-BG Grease Kit
To be used to help prevent premature discharge of GREASOMATICs with oil-fillings.
Also, can be used with any GREASOMATIC that is to discharge into a pressurised system.
Opens one way only at light pressure of ca 0.3 bars or 4 psi.
¼ BSP
Nylon Retaining Plate
Nylon Retaining Plate
Retaining plate to hold the front whole bearing in place on the BA-to BC unit.
P006 Steel Beam
P006 Steel Beam
Fully galvanised steel beam to suit P006 Biotec sewage treatment system. Is used to support filtration bale
P006-012 Hose Reducer
P006-012 Hose Reducer
5/8" ID to 1/2" ID Unequal Hose Reducer
Blue Tefen Nylon Fitting
P012 Steel Beam
P012 Steel Beam
Fully galvanised steel beam to suit P012 Biotec sewage treatment system. Is used to support filtration bale
P018-P025 Access Cover Lock
P018-P025 Access Cover Lock
Biotec P18-25 Access cover lock - long barrel type, complete with nut.
Note, that the older version of these are now obsolete. The thread length on the new version is 12mm and slight adjustments might need made if it's an older unit
P6 Airlift
P006 Airlift
This airlift is used on our P006 Sewage treatment system. It helps to distribute waste water from the settling tank up through the pipework and is then filtered through the bale filtration.
Comes complete with Distribution cone and Connections
Dims: 1700 mm H
Material: Acrylonitrile Butadiene Styrene (ABS Plastic)
Panasonic Keyway
Panasonic Keyway
Keyway for Panasonic Motor and top pulley (BA - BB BioDisc only)
PPFDS pipework
PPFDS Pipework
Hose to allow PPFDS system to connect
Per metre
PPFDS Stud Coupling (6mm)
PPFDS Stud Coupling (6mm)
To allow connection of the PPFDS pipework into the Control Panel
Pressure Transducer
Pressure Transducer for our Rainwater Harvesting tanks.
PUMPWELL (1 METRE) PIPEWORK
Pumpwell (1 metre) pipework
Boitec P6-P12 IPS Manifold pipework
Includes Non-return Valve
Material: PVC
Manufactured in one complete part
PUMPWELL (1.5 METRE) PIPEWORK
Pumpwell (1.5 metre) pipework
Boitec P6-P12 IPS Manifold pipework
Includes Non-return Valve
Material: PVC
Manufactured in one complete part
Pumpwell Assembly
Pumpwell Assembly
1no IPS Pumpwell
2no Scrum Baffle
To be used to convert your gravity system into an IPS unit (Pumped Outlet)
RADIAL ARM BA/BB BIODISC
RADIAL ARM BA/BB BIODISC Description
This galvanised steel angle Radial Arm for ba-bb biodisc sewage treatment plant, this part holds the discs in place and stops them from turning individually.
Rainwater Display Panel
Kingspan Rainwater Display Panel
This Sensor display panel can be used with both Kingspan Water Envireau and Biotec models.
SECOH JDK 40-50 SERVICE KIT
Secoh JDK 40-50 Service Kit
All our Genuine Secoh service kits are sealed to help protect them from dust and light, easy to install and will help pro-long the life of your Secoh blower.
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
Secoh Service Kit for JDK Series air pumps contains:
2no Diaphragms
2no...
SECOH JDK-40 SINGLE SERIES BLOWER
SECOH JDK-S-40 SINGLE SERIES BLOWER
The JDK models are a direct replacement of the Secoh EL series of blower. They feature up to 30% less energy consumption, as well as being more compact than the EL series.
This model is to be used in the Biosafe/ CLP6 unit, located on the inside of the unit.
Long life expectancy
All parts of the motor are combined into one single construction. The...