1125 Ltr (250 Gallon) Drinking Water EU Highway Bowser
Industrial Water bowser for the transport and storage of drinking water. Road bowsers are primarily for high speed operation on the road full or empty at speeds up to 60MPH, they can be towed off road at slower speeds, they are fitted with either a 40mm ring eye or a 50mm ball coupling. Chassis Constructed from 80 x 80 R.S.A. fully welded with a ‘T’ frame drawbar, all fully hot dipped galvanised to B.S. standards. Axle/Suspension Avonride rubber torsion beam axle fitted with 200 x 50 auto reverse brakes. Wheels/Tyres 2 No. 175 x 13 8 ply commercial van tyres on 4 stud 5.1/2” PCD rims. Coupling Knott Avonride auto reverse coupling fitted with 50mm ball or 40mm eye, break away cable and parking brake lever.
Tank Polyethylene moulded tank, Elliptical in section, baffled and fitted with an 18” lockable outer hinged manlid cover, inner sealed vented manlid. Tank secured to chassis with 2 stainless steel straps. 1 rear tap fitted, various outlets, 2 rear and 2” drain. Ancillary Equipment Moulded mudguards, mud flaps, front telescopic jockey wheel, side reflectors, rear lighting board c/w 13 pin plug. Rear prop-stand options. Finish Poly tank in yellow, green, red or blue. Drinking water blue tank only. Galvanised chassis.
Male hydrant connection under manlid.
1" Petrol Pump which can only be used in conjunction with the Extended Chassis
Finish Tank in drinking water blue approved poly. Chassis galvanised
To use the shipping estimator please select the * Required Fields (if applicable) shown on product above, then enter the quantity required (below) to obtain a carriage estimate.
Please call us for delivery to postcodes in Wales, Scotland, Highlands and Islands.
Width 1.55m (61”)
Length 2.77m (109”)
Height 1.36m (53”)
Gross weight 1500kg
Unladen weight 260kg
Towing Height: (Level) 420mm