Highway Pressure Washer Bowser 1000 Litre
This highway model bowser fitted with a durable impact resistant polythene tank and a galvanised chassis fitted with a leaf-spring suspension axle , plus either a petrol or diesel pressure washer. Each tank has a lockable tamper proof lid, covering 400mm diameter access hatch which incorporates the filler point and vent. This unit is manufactured to full highway specification, with overrun and lockable parking brakes and two 185 x 14 x 8 Ply wheels and tyres fitted underneath plastic mudguards. The hydraulically damped towing unit will be supplied with an eye or ball hitch (to suit your towing vehicle) with telescopic jockey wheel, and a prop stand fitted to the rear of the unit.
Standard lighting board unit, wired through the chassis and connected to an international 7 pin plug. Comes complete with 30ft of high pressure hose with low pressure chemical injection and on/off lance, with a Honda GX240 petrol engine or a Yanmar L70 diesel engine and Interpump, in-line water filter, and chemical storage bottle. The plastic tanks are available in red, green, yellow or blue. The hose and lance are stored on a small fibreglass hose reel with the lance clipped securely to the chassis.
There is a choice of 2500 and 3000 PSI petrol/diesel machines. ALL THE DIESEL UNITS ARE SUPPLIED WITH ELECTRIC START
The flow rate of the 2500 psi units (petrol or diesel) is 15 litres per minute.
The flow rate of the 3000 psi units (petrol or diesel) is 17 litres per minute.
Available as a site model without the full highway specification, of overrun and lockable parking brakes and fitted plastic mudguards. Standard lighting board unit, wired through the chassis and connected to an international 7 pin plug.
To use the shipping estimator please select the * Required Fields (if applicable) shown on product above, then enter the quantity required (below) to obtain a carriage estimate.
Please call us for delivery to postcodes in Wales, Scotland, Highlands and Islands.
|Outlet Size:||1" BSP Female|
|Lid size (mm):||400|
Laden Weight: 1305 kg approx
PSI : 2500