1125 Ltr (250 Gallon) 140 Bar Highway Pressure Washer
Industrial highways pressure washer. Industrial Water bowser for the transport and storage of drinking water. Road bowsers are primarily for high speed operation on the road full or empty at speeds up to 60MPH, they can be towed off road at slower speeds, they are fitted with either a 40mm ring eye or a 50mm ball coupling. Chassis Constructed from 80 x 80 R.S.A. fully welded with a ‘T’ frame drawbar, all fully hot dipped galvanised to B.S. standards. Axle/Suspension Avonride rubber torsion beam axle fitted with 200 x 50 auto reverse brakes. Wheels/Tyres 2 No. 175 x 13 8 ply commercial van tyres on 4 stud 5.1/2” PCD rims. Coupling Knott Avonride auto reverse coupling fitted with 50mm ball or 40mm eye, break away cable and parking brake lever.
Tank Polyethylene moulded tank, Elliptical in section, baffled and fitted with an 18” lockable outer hinged manlid cover, inner sealed vented manlid. Tank secured to chassis with 2 stainless steel straps. 1 rear tap fitted, various outlets, 2 rear and 2” drain. Ancillary Equipment Moulded mudguards, mud flaps, front telescopic jockey wheel, side reflectors, rear lighting board c/w 13 pin plug. Rear prop-stand options. Finish Poly tank in yellow, green, red or blue. Drinking water blue tank only. Galvanised chassis.
Optional (extras) Male hydrant connection under manlid.
Finish Tank in drinking water blue approved poly. Chassis galvanised
Chassis - Constructed from 70 x 70 R.S.A. fully welded with a ‘T’ frame drawbar, all fully hot dipped galvanised.
Axle/Suspension - Avonride rubber torsion beam axle fitted with 200 x 50 auto reverse brakes. 4 stud 5½“ pcd hubs
Wheels and Tyres - 2 no. 185 x 13 6 ply commercial van tyres on 5½” pcd 4 stud rims.
Coupling - Avonride auto reverse coupling fitted with 40mm eye or 50mm ball, break away cable and parking brake lever
Ancillary Equipment - Moulded mudguards, front telescopic jockey wheel, rear lighting board.
Elliptical in section, baffled and moulded from polyethylene and fitted with an 18” lockable outer hinged manlid cover, inner sealed vented manlid. Tank secured to chassis with 2 stainless steel straps.1 rear tap fitted , 2” bottom drain underneath rear of tank .Inner anti surge baffle.
Honda GX 160 Hand Start Petrol Engine driving a 140 Bar (2000psi),10 lpm piston pump c/w hand lance and 7m of hose stowed on bracket.
Tank moulded in yellow polyethylene. Chassis galvanised
To use the shipping estimator please select the * Required Fields (if applicable) shown on product above, then enter the quantity required (below) to obtain a carriage estimate.
Please call us for delivery to postcodes in Wales, Scotland, Highlands and Islands.
Width 1.55m (61”)
Length 3.480m (137”)
Height 1.22m (48”)
Unladen weight 375kg
Gross weight 1480kg