3000 psi Highway Pressure Washer
Chassis - Constructed from 80 X 80 R.S.A. fully welded with a ‘T’ frame drawbar, all fully hot dipped galvanised. 5mm sheet front mounting plate.
Axle/Suspension - Avonride rubber torsion beam axle fitted with 200 x 50 auto reverse brakes. 4 stud 5½“ pcd hubs
Wheels and Tyres - 2 no. 175 x 13 x 8 ply tyres on 5½” pcd 4 stud rims.
Coupling - Avonride auto reverse coupling fitted with 40mm ring eye or 50mm ball, break away cable and parking brake lever
Ancillary Equipment - Moulded mudguards, mud flaps, front telescopic jockey wheel, Side and front reflectors, rear lighting board.
Elliptical in section, baffled and moulded from polyethylene and fitted with an 22”lockable outer hinged manlid cover, inner sealed vented manlid. Tank secured to chassis with 2 stainless steel straps.1 rear tap fitted , 2” bottom drain underneath rear of tank.
Yanmar electric start L100 10HP engine driving a 200 Bar, 15Lpm piston pump c/w hand lance and 7m of hose stowed on bracket. Fuel consumption approx 1.5L/Hr, running time approx 2.9Hrs
Tank moulded in yellow, blue, red or green polyethylene. Chassis galvanised
To use the shipping estimator please select the * Required Fields (if applicable) shown on product above, then enter the quantity required (below) to obtain a carriage estimate.
Please call us for delivery to postcodes in Wales, Scotland, Highlands and Islands.
Width 1.55m (61”)
Length 3.454m (136”)
Height 1.346m (53”)
Unladen weight 375kg
Gross weight 1500kg
Towing Height (Level) 420mm)