Ebara Optima Automatic Submersible Pump

Technical Documentation

The Ebara Optima Automatic Submersible pump can be used for various domestic applications including draining wells, garages, cellars or places that are subject to flooding.

It can also be used for movement of seepage water or draining of unfoul wastewater, as well as irrigation of gardens.

Technical Details

• Equipped with mechanical seal as per standard
• Corrosion Proof
• Can be used in fixed or mobile installations
• 10 m of H05 RN-F Power supply cable for indoor and outdoor use - with or without float.

Pump Technical Data

• 1 1/4" BSP Female outlet 
• Total Head from 1.5 to 7.6 m
• Capacity from 1.2 to 9 m3/h
• Maximum Immersion: 5 m
• Maximum Liquid Temperature: 50 °C
• Maximum Solid Size Passage: 10 mm

Motor Technical Data

• Asynchronous motor, 2 poles
• Class of insulation F
• IP68 Protection degree
• 230V ±10%, 50 Hz single phase voltage

Materials

• Pump casing, suction grill, seal housing disc and motor pump body in AISI 304
• Impeller, diffuser and motor cover in techno polymer reinforced with fibreglass
• Shaft in AISI 303
• Standard mechanical seal (Carbon/ Ceramic/ NBR)

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.