24 Litre Wheel Arch Tank

24 Litre Wheel Arch Tank

The 24 Litre wheel arch tank is designed to fit in vans and pickups. With its 6 x M8 inserts moulded into the tank, is it easy to mount onto the van or Pickup.

There is also a range of kits available to ensure the tank is quick and easy to install including a plumbing kit, fitting kit and a submersible pump kit options. The kits, if selected, will comprise the following -

Fitting Kit

• 3 x M8 x 12mm socket button head stainless steel
• 3 x M8 x 25mm washer stainless steel
• 1 x 50mm x 55mm x 30mm angle bracket
• 2 x 150mm x 90mm x 60mm angle bracket.

Plumbing Kit

This kit has all the fittings required for the outlet, inlet and vent hoses

• 1 x 1/2" BSP x 13mm hose tail
• 2 x 1/2" BSP 90 degree hose tail
• 3 x 1/2" BSP gasket 
• 3 x 1/2" BSP back nut
• 1 x 10 Metre roll PTFE tape

Submersible Pump Kit

This kit can be used to allow a submersible pump to be connected through the lid

• 1 x 1/2" BSP 90 degree bulkhead hose tail 11-13mm
• 1 x 1/2" BSP back nut
• 1 x 1/2" BSP Gasket
• 1 x Cable gland
• 1 x 10 metre roll of PTFE tape

**IMPORTANT** Due to the manufacturing process, we cannot guarantee products are free from debris, notably but not limited to dust or swarf, please check and rinse out if required.

• Product Code: WD
• Colour: Black
• Lid Size: 50
• Material: MDPE
• Outlet Size: 1/2" BSP Female
• Potable: Potable
• Shape: Rectangle
• Tank Use: Above Ground

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.