4320 Litre AquaCUBE Rainwater Harvesting System


Product Ref: AQCB/4320/3

Customer Offloading Free Delivery
  • Volume: 3375ltr
  • Dimensions: L:2500mm W:1500mm H:1500mm
  • Home Delivery

    UK mainland delivery from FREE ex VAT

    check delivery cost

    Choose option:

    from £12,222.00 ex VAT
    (£14,666.40 inc VAT)
    monduB2B Pay Later & Instalment OptionsLearn more


    Product Description

    4320 Litre AquaCUBE Rainwater Harvesting System

    Designed to provide a pre-assembled, self-contained rainwater harvesting system, the aquaCUBE can be used across various builds, being new or exsting retrofit sites.

    All pumps, filters and controls are included in the one unit, allowing simple and straight forward 'plug and play' installation.


    • Toilets and Urinals
    • Laundry
    • Irrigation
    • Vehicle and general cleaning

    The AquaCube system has been designed to supply direct, pressurised water to your installed appliances, through the use of a single pump which is mounted away from the stored water container. The AquaCUBE will require the following services:

    • Incoming rainwater supply from the roof
    • Tank overflow should be fitted to a soak away or storm drain
    • Main electricity supply
    • Mains water supply for system top-up in low rainflall periods
    • Pressurised rainwater from the system booster pump feed
    • Control unit emergency warning pipe should be fitted so overflows are visible
     Capacity (Litres)  4320
     Dimensions (mm)  1500 H x 1500 W x 2500 L
     Weight (kg)  375
     Colour  Light Grey
     Rainwater Inlet Size  110mm
     Rainwater Overflow Size  110mm
     Pump Discharge  1''
     Power  0.55kW / 3.9A
     Voltage  220 - 240v
     Pump Type  AquaProf 40/50


    AquaProf Pump

    The AquaProf basic 40/50 system is used for rainwater management and distrubtion. It detects any faults in the water collection system, whether from ranwater or the mains and makes automatic corrections to ensure continued operation of the system.

    Pump Specifications

    • Liquid Temperature range from +5°C to +35°C
    • Max.system pressure: Max 6 bar
    • Max. Main pressure: Max 4 bar
    • Minimum mians flow rate: 10 lpm
    • Maximum height of highest use: 12m
    • 230v Hz50 power supply
    • Maximum power absorbed: W1000
    • IP42 Protection rating
    • Ambient Temperature: Min 5°C, Max 40°C
    • GRP
    • 3/4'' mains inlet pipe dimensions
    • 1'' discharge pipe dimensions
    • 1'' Suction pipe dimensions
    • DN 50 over pipe dimensions
    • 1000 m Max Altitude
    • Max Power pump No.2 relay: 3'A_250volt
    • Water type: ph 4-9
    • ON/OFF float versions: N/OFF flaot with 20m cable



    All our Rainwater harvesting tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and/or machinery to help unload the tank/s from the delivery vehicle.

    If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.

    Product Details

    • Product Code: DPT
    • Customer Offloading: Customer Offloading
    • Delivery: Free Delivery


    Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

    Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

    Our lead times should only be used as a guide and are subject to change.


    Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

    We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.


    HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

    If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

    Returns Information

    Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

    Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

    All Items must be returned unused, refunds cannot be issued for used or previously installed items.

    Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

    If you wish to return goods, please complete the form on this page to provide further information.

    Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

    Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

    Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

    View Tanks Direct's return policy now.