The MH series of pumps are designed for circulation in ponds, feeding waterfalls and creating water features. All models are compact, yet powerful, however, the MH-150 and MH-250 are principally suited to the pre-formed pool or small pond. The larger models are better suited to the more significant moving water project, lake or large pond. The non-clog impeller can deal easily with fish waste, vegetation, soft solids etc up to a size of 6mm.

The construction incorporates heavy duty bearings, a hard-stainless steel (410) shaft fitted with an ultra-hard-wearing silicon carbide mechanical seal (in a chamber of non-toxic oil) for durability and continuous operation. Corrosion resistant and hard-wearing materials are used throughout with the motor housing in 304 stainless steel and pump casing, strainer and impeller in thermoplastic. Three rubber cushion feet enable them to be installed horizontally, or vertically on the strainer stand. This strainer is easily removed for cleaning the pump chamber. A 50mm outlet hose connector is supplied as standard, however, the female BSP outlet enables a simple connection for fountain attachments, pipe fittings and gate valves. Supplied with 10 metres of heavy-duty power cable. Optional extras include a choice of three fountain attachments, to suit the MH-150 and MH-250, and a telescopic nozzle extension pipe (extending from 278mm to 508mm), enable correct positioning above the water level. A gate valve is recommended (at an extra cost) for adjusting the flow to create the perfect water feature.

? Ponds
? Water features
? Fountains
? Water walls
? Special effects

Specifications