MiniBREAK MB1-38M-FP
Product Ref: 10-005830-000





Estimated Lead time 5-7 working days
Custom Delivery Required
Delivery price on application.
Downloadable Documents
Product Description
The DutyPoint MiniBREAK MB1-38M-FP - 10-005830-000
The MiniBREAK FP single-pump packaged tank and booster set with frost proection has been designed from the ground up to be compact while providing maximum fluid Category 5 backflow protection via an ‘AB’ air gap to ensure water safety is parmount. This package complies with the Water Supply (Water Fittings) Regulations 1999 and is supplied as a complete all pre-assembled in an enclosed LDPE and Stainless Steel cabinet with frost proection, suitable for either wall or floor mounting. For the MiniBREAK without frost proection, see MB1-38M-S.
Pump control is managed by a proven and intuitive controller that starts the pump when pressure falls and stops it when flow cease, all whilst ensuring the control unit also provides low-water protection to prevent dry running.
Product overview:
- Volt-free contact for pump running
- Frost Protection as standard
- IP65-rated controller
- LDPE and Stainless Steel Housing
- 18 Litre Break tank
- Low-water protection device
- Wall or floor mountable
- Single phase
- Compact design
- WRAS Approved
Applications:
- Wash down in bin stores
- Dentist’s rinsing equipment
- Laboratory water supplies
- Single hosepipe supplies
Plus any application where cat 5 protection is required - mortuaries, abattoirs, zoos, healthcare premises, etc...
Technical Specifications :
SKU | 10-005830-000 |
---|---|
In Stock | In Stock |
Brand | Dutypoint |
Manufacturer's Part Number | 10-005830-000 |
Model | MiniBREAK MB1-38M-FP |
FPPower Supply | 240V 1~ 50Hz |
kW Rating | 0.37 |
Max Flow Rate | 0.5 l/sec |
Minimum Liquid Temperature | 2°C |
Maximum Liquid Temperature | 23° |
Inlet Connection | 1/2'' Threaded |
Outlet Connection | 1/2'' Threaded |
Product Details
- Product Code: MB1-38M-FP
- Customer Offloading: Customer Offloading
- Delivery: Fast Delivery
- Outlet Size: 1/2" BSP Female
- Potable: Potable, WRAS Approved
- Tank Use: Water
Delivery
Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.
Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland
Our lead times should only be used as a guide and are subject to change.
Offloading
Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.
We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.
HIAB
HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.
If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.
Returns Information
Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.
Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **
All Items must be returned unused, refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).
If you wish to return goods, please complete the form on this page to provide further information.
Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.
Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.
Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.