Featured Products
.png)
ET-40 CHARLES AUSTEN BLOWER
(£95.99 inc VAT)
ET-40 CHARLES AUSTEN BLOWER
The ET40 is a linear diaphragm air pump which provides a clean, oil free air source and is ideally suited for outdoor (rainproof) use.
Applications:
Sewage Aeration
Aquatic Oxygenation
Spas / Whirlpools
Water Features
Product Features
Green drive technology - energy efficient motors so low power consumption
Specially formulated diaphragm...
£79.99 ex VAT (£95.99 inc VAT)
ET-60 AO Charles Austen Blower
(£126.00 inc VAT)
ET60 AO Charles Austen Blower
The Charles Austen ET60AO is a linear diaphragm air pump which provides a clean, oil free air source and is ideally suited for outdoor (rainproof) use.
The Charles Austen ET60AO comes with a built-in loss of pressure alarm and an extra output cable for an external beacon.
Applications Include:
Sewage aeration
Aquatic oxygenation
Spas / whirlpools
Water...
£105.00 ex VAT (£126.00 inc VAT)
Smart Control Panel & Beacon Combo
(£407.94 inc VAT)
Treatment Tank Control Panel (Smart Range)
This New Style Klargester Control Panel for waste water tanks with digital display continuously monitors the internal timetables and operates the appropriate pump/motor outputs according to a timetable entry. The status is shown on the display. The current time continues to be updated internally by battery backup when the mains fail, and the control unit...
£389.94 £339.95 ex VAT (£407.94 inc VAT)
Grid
List
110mm Blanking Cap
110 mm Blanking Cap
Push fit, PVC Plastic Closing Cap to suit standard sewage piping
5 pin relay base
5 pin relay base
BALE ASSEMBLY P006
BALE ASSEMBLY P006
Filtration Media to Suit Biotec P006 Sewage Treatment Systems
Comes completed with Enkamat Netting/Matting
BALE ASSEMBLY P012
BALE ASSEMBLY P012
Filtration Media to Suit Biotec P012 Sewage Treatment Systems
Note, Enkamat Netting/Matting sold separate (2 metres suared is advised for this)
Charles Austen ET100-120 Filter
Charles Austen ET100/ET120 Filter
This filter is suitable for use with the Charles Austen ET100 & ET120 Air Pump.
Your inlet filter should be washed out every 6 months and replaced every year. Failing to do so can reduce the pumps flow up to 30% and cause possible overheating.
Note, these can not be returned once opened. Please make sure it's the correct kit for your blower.
...
Delta Lid Galvanised Frame
Delta Lid Galvanised Frame
Fully Galvanised steel frame to suit Delta Main Cover for sewage treatment systems
Ebara Best One MS Automatic Sump Drainage Water Pump - Float Switch - 230v
Ebara Best One MS Automatic Sump Drainage Water Pump - Float Switch - 230v
The best one MS submersible electric pump is for clean & dirty water, it can be used in multiple applications including draining, garages, basements, cellars, or any other places that are subject to flooding. Also, it can be used to supply water to garden fountains and be used for easy emptying of large tanks and reservoirs....
ET-40 CHARLES AUSTEN BLOWER
ET-40 CHARLES AUSTEN BLOWER
The ET40 is a linear diaphragm air pump which provides a clean, oil free air source and is ideally suited for outdoor (rainproof) use.
Applications:
Sewage Aeration
Aquatic Oxygenation
Spas / Whirlpools
Water Features
Product Features
Green drive technology - energy efficient motors so low power consumption
Specially formulated diaphragm...
ET-60 AO Charles Austen Blower
ET60 AO Charles Austen Blower
The Charles Austen ET60AO is a linear diaphragm air pump which provides a clean, oil free air source and is ideally suited for outdoor (rainproof) use.
The Charles Austen ET60AO comes with a built-in loss of pressure alarm and an extra output cable for an external beacon.
Applications Include:
Sewage aeration
Aquatic oxygenation
Spas / whirlpools
Water...
GRP Kit / Fibreglass Repair Kit (2m)
GRP Kit / Fibreglass Repair Kit (2m)
The comprehensive GRP Fibreglass kits are supplied complete with all the materials needed to repair or bond GRP neck extensions.
The kit will cover 2 metres area with 1no layer of 450gm Fibreglass Matting. Catalyst is included for the resin.
The Resin included is a general-purpose resin that can be used for all types of all types of moulding including,...
M8 S/S PLAIN WASHER
M8 S/S PLAIN WASHER Description0
P6 Airlift
P006 Airlift
This airlift is used on our P006 Sewage treatment system. It helps to distribute waste water from the settling tank up through the pipework and is then filtered through the bale filtration.
Comes complete with Distribution cone and Connections
Dims: 1700 mm H
Material: Acrylonitrile Butadiene Styrene (ABS Plastic)
PPFDS Pressure Spigot
PPFDS Pressure Spigots
Smart Control Panel & Beacon Combo
Treatment Tank Control Panel (Smart Range)
This New Style Klargester Control Panel for waste water tanks with digital display continuously monitors the internal timetables and operates the appropriate pump/motor outputs according to a timetable entry. The status is shown on the display. The current time continues to be updated internally by battery backup when the mains fail, and the control unit...
110mm Grommet c/w 10mm Throat
110mm Grommet c/w 10mm Throat
These are used for inlet and outlet pipes for Septic tanks and also for Sewage treatment tanks.
20mm x 3/4 bsp Female adapter
3/4 BSP Female adapter x 20mm
This adapter can be used for flexible hoses and suction pipes.
The adapter converts the hose to a BSP thread so that it can be attached to pumps, tank and equipment.
The size refers to the inside diameter of the pipe
24vac-impulse-relay
24vac-impulse-relay
Biotec P12 Screen Assembly
Biotec P12 Screen Assembly
This is a baffle that separates the primary settlement tank and the second chamber, comes complete with:
1no Airlift Baffle
2no Scum Baffles
8no Rivet Tap
Made from GRP (Glass Reinforced Plastic)
Biotec P6 Screen Assembly
Biotec P6 Screen Assembly
This is a baffle that separates the primary settlement tank and the second chamber, it comes complete with:
1no Airlift Baffle
2no Scum Baffles
8no Rivet Tap
Made from GRP (glass Reinforced Plastic)
Charles Austen Envirosure 100 Low Pressure Alarm
Charles Austen Envirosure 100 Low Pressure Alarm
Perfect for detecting if a blower in a sewage system is failing
Detects aeration pump failures or power cuts immediately
Compact, lightweight, low power consumption, minimal running costs
Multiple variants – options include bright LED beacon, plug-in or hardwire
Versatile installation – installs in minutes with quick fit installation...
Charles Austen Envirosure Beacon
Charles Austen Envirosure Beacon
Perfect for helping detect if a blower in a sewage system is failing.
Can be bought to run alongside the Charles Austen low pressure alarm
ET-120 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-120 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen recommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure its the correct kit for your blower.
ET-40 CHARLES AUSTEN BLOWER SERVICE KIT
ET-40 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-40 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen recommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure it's the correct kit for your blower.
ET-60 Diaphragm Set
ET-60 Diaphragm Set
We recommend changing this Charles Austen Diaphragm set every 18 months. The set is for ET60, ET60 A & ET60 AO versions of the air blower
Included:
2 no diaphragms
1 no magnet
LED 6 Volt Beacon
LED 6 Volt Beacon
The Beacon provides an external visual indication which is used to indicate Failure & Service Reminders and may be included in the Power and Pressure Failure Detection System (PPFDS).
The beacon is provided with a 5m cable which can be extended to 30m. As supplied
The unit is protected against rain to IP65 and is supplied ready to mount on a suitable surface.
This...
P006 Steel Beam
P006 Steel Beam
Fully galvanised steel beam to suit P006 Biotec sewage treatment system. Is used to support filtration bale
P006-012 Hose Reducer
P006-012 Hose Reducer
5/8" ID to 1/2" ID Unequal Hose Reducer
Blue Tefen Nylon Fitting
P012 Steel Beam
P012 Steel Beam
Fully galvanised steel beam to suit P012 Biotec sewage treatment system. Is used to support filtration bale
PUMPWELL (1 METRE) PIPEWORK
Pumpwell (1 metre) pipework
Boitec P6-P12 IPS Manifold pipework
Includes Non-return Valve
Material: PVC
Manufactured in one complete part
PUMPWELL (1.5 METRE) PIPEWORK
Pumpwell (1.5 metre) pipework
Boitec P6-P12 IPS Manifold pipework
Includes Non-return Valve
Material: PVC
Manufactured in one complete part
Pumpwell Assembly
Pumpwell Assembly
1no IPS Pumpwell
2no Scrum Baffle
To be used to convert your gravity system into an IPS unit (Pumped Outlet)
SECOH JDK 100-120 SERVICE KIT
Secoh JDK 100-120 Service Kit
All our Genuine Secoh service kits are sealed to help protect them from dust and light, easy to install and will help pro-long the life of your Secoh blower.
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
Secoh Service Kit for JDK Series air pumps contains:
2no Diaphragms
2no...
SECOH JDK 150/200/250/300/400/500 SERVICE KIT
Secoh JDK 150/200/250/300/400/500 Service Kit
All our Genuine Secoh service kits are sealed to help protect them from dust and light, easy to install and will help pro-long the life of your Secoh blower.
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
Secoh Service Kit for JDK Series air pumps contains:
2no...
SECOH JDK 40-50 SERVICE KIT
Secoh JDK 40-50 Service Kit
All our Genuine Secoh service kits are sealed to help protect them from dust and light, easy to install and will help pro-long the life of your Secoh blower.
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
Secoh Service Kit for JDK Series air pumps contains:
2no Diaphragms
2no...
SECOH JDK 60-80 SERVICE KIT
SECOH JDK 60-80 SERVICE KIT
All our Genuine Secoh service kits are sealed to help protect them from dust and light, easy to install and will help pro-long the life of your Secoh blower.
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
Secoh Service Kit for JDK Series air pumps contains:
2no Diaphragms
2no...
SECOH JDK-40 SINGLE SERIES BLOWER
SECOH JDK-S-40 SINGLE SERIES BLOWER
The JDK models are a direct replacement of the Secoh EL series of blower. They feature up to 30% less energy consumption, as well as being more compact than the EL series.
This model is to be used in the Biosafe/ CLP6 unit, located on the inside of the unit.
Long life expectancy
All parts of the motor are combined into one single construction. The...
Secoh JDK-50 Single Series Blower
SECOH JDK-S-50 SINGLE SERIES BLOWER
The JDK models are a direct replacement of the Secoh EL series of blower. They feature up to 30% less energy consumption, as well as being more compact than the EL series.
This model is to be used in the Biosafe/ CLP6 unit, located on the inside of the unit.
Long life expectancy
All parts of the motor are combined into one single construction. The...
Kiosk
Small Grey Kiosk
Strong Polypropylene Plastic Kiosk complete with small lock and keys. Complete with 2no keys
406 mm wide
330 mm deep
686 mm high
.
Solenoid Valve
Solenoid Valve
To be used with the solenoid timer on below link :-
Solenoid Timer - Tanks Direct (tanks-direct.co.uk)
Used in Bioficient and Delta units
Stainless Steel Hose Fixing
Stainless Steel Hose Fixing
25-35mm
ET-250 Charles Austen Blower
ET-250 Charles Austen Blower
Designed for use in sewage aeration applications, the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture.
...
ET-250 CHARLES AUSTEN BLOWER SERVICE KIT
ET-250 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-250 Charles Austen Blower service kit for the includes:-
4 Diaphragms
1 Filter
16 Valves
Charles Austen recommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure it's the correct kit for your blower.
JDK-L Connector (60-120)
JDK-L Connector (60-120)
This Secoh JDK Connector is for all models from 60 to 120, it is 3/4 inch in diameter, this part needs to be replaced if showing any signs of damage or cracks. This will help with the longevity of the blower.
3 Pole Isolator Switch
3 POLE ISOLATOR SWITCH
3 Pole Non Fused lockable Isolator Switch with high impact grey polycarbonate enclosure, UV stabilised to IP66/67, Complete with 1no fuse block
1/2' Clear Braided Hose SOLD PER METRE
1/2' Clear Braided Hose SOLD PER METRE
BioTec P4 to P25 and Airflow 1 to 4.
This is a 1/2 inch clear reinforced hose which can also be used to connect the airlift to the manifold within BioTec P40 and Airflow AF5 upwards.
Sold as a continual length
3/4' Clear Braided Hose SOLD PER METRE
3/4' Clear Braided Hose SOLD PER METRE
3/4" clear braided hose for waste treatment systems.
Sold as a continual length
Biotec P6-P12 500mm Extension
Biotec P6-P12 500mm Extension
Biotec P6-P12 Sewage treatment extension neck
495mm deep
1875mm diameter
50-50 Spray50% Filled Laminate
Thickness: 7mm
Weight: 33.17 35Kg
Aeration Blower Housing Clips
BLOWER HOUSING CATCH/CLIP
If you need a full set of clips, order x4 clips.
These clips match the blower housing on the below link : -
Kingspan Parts Blower Housing (Complete) - Tanks Direct (tanks-direct.co.uk)