PlumbEZ Telescopic Adjustable Bottle Trap with Anti-Slip Ring

What is the benefit of a telescopic bottle trap?

It allows height adjustment to suit different basin and pipework positions

What does the anti-slip ring do?

It provides a more secure connection between the trap and the waste outlet, helping to prevent movement and leaks.

Where is the trap typically used?

It is commonly used on bathroom and cloakroom basins

Does this trap prevent bad smells?

Yes, the bottle trap design creates a water seal that blocks odours from the drainage system

Is maintenance required?

Occasional cleaning is recommended, and the bottle section allows easy access if needed.

PlumbEZ Telescopic Adjustable Bottle Trap with Anti-Slip Ring - 32mm or 40mm

The Telescopic Adjustable Bottle Trap with Anti-Slip Ring is a compact and reliable waste solution designed for basin installations where space efficiency and neat appearance are important.

The telescopic body allows easy height adjustment to suit varying installation requirements, while the bottle trap design provides an effective water seal to prevent foul odours from entering the room.

The integrated anti-slip ring enhances stability at the waste connection, helping to maintain a secure, leak-resistant fit over time.

Applications

• Basin Waste Installations (32mm)
• Sink Waste Installations (40mm)
• Bathroom and cloakroom basins
• Domestic Plumbing Systems
• Light Commercial Washrooms and Kitchens
• Replacement of existing bottle traps

Features and Benefits

• Telescopic Adjustable Body - Allows vertical adjustment for easier installation
• Bottle Trap Design - Compact profile ideal for visible installations 
• Anti-Slip Ring - Improves grip and stability at the waste outlet connection
• Available in 32mm & 40mm - Suitable for basins, sinks, and general waste use
• Effective Water Seal - Prevents foul odours from the drainage system
• Durable Construction - Designed for long service life and reliable performance
• Easy Maintenance - Bottle section can be accessed for cleaning

Installation Guide

1. Ensure the waste outlet and pipework are clean and free from debris
2. Connect the trap inlet to the basin waste using the supplied anti-slip ring and sealing washers
3. Adjust the telescopic section to the required height
4. Align the outlet with the waste pipe and secure the compression fitting
5. Run water through the system and check for leaks.

Installation should be carried out in accordance with local building and plumbing regulations

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.