Grease Filter Spec

Grease Filter Installation Docs

Grease trap - Poly-Lok PL-625

The PL-625 filter is perfect for residential waste flows up to 80,000 GPD. It has an easy to install filter that fits into any 4 inch outlet tee. You can add multiple filters to achieve better filtration. It's recommended that the filters are cleaned every three years or when the tank is being pumped. The 1/32" filtration has been shown to reduce fats, oils and grease (FOG) by as much as 60% to 98%! The filter may be used in on-site wastewater systems that require a finer level of TSS removal.

• Fits 4 & 6 inch 40 PVC Piping
• Easy to clean 
• Quick to install
• Gas/Solids Deflector Ball Prevents Slida From Entering The Filter
• Rated to filter 8,000 gallons per day
• NSF/ANSI Certified and Approved
• 625 Liner feet of 1/32" filter area
• 364mm (L) x 294mm (W) x 839mm (H)

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.