SECOH JDK-S-60 Single Series Blower

Secoh Product Data Sheet 60-80

Secoh Blower 60-120 Instruction Manual

Secoh Blower Check List

Secoh Spares Leaflet

SECOH JDK-S-60 Single Series Blower Complete with Cable

The SECOH JDK-S-60 is a linear-diaphragm (electromagnetic oscillation) air blower, designed as a modern, energy-efficient replacement for older EL/LP/HP-60 models. 

It is engineered for continuous duty aeration service in wastewater treatment, sewage systems, and other applications where dependable, oil-free air supply is needed.

The JDK models are a direct replacement of the Secoh EL series of blower. They feature up to 30% less energy consumption, as well as being more compact than the EL series.

This model is to be used in the Biosafe/ CLP6 unit, located on the inside of the unit.

 

Features	Benefits
Energy-efficient design	Consumes less power (up to ~30% less than comparable older EL Series) thanks to reduced Internal friction and optimised electromagnetic drive
Compact, Lightweight construction	Smaller footprint and lower weight (6.5 kg) make it easier to install or retrofit in constrained plant enclosures
Oil-Free Airflow	No oil lubrication is needed, so the delivered air is clean and free of oil vapour or contaminants - critical for water/ biozones
Low noise & low vibration	The unit features a built-in muffler chamber and vibration isolation between motor and pump parts to reduce acoustic disturbance
Pulsation-Free flow	Specially shaped pump chambers and muffling result in a smoother, steadier airflow, better suited for fine diffuser systems
Robust, weather - resistant housing	The blower is rated as rainproof / weatherproof (but should be sheltered from direct sun, rain, snow)
Modular Serviceability	Standard spare kits (diaphragms, valve boxes, filters) are available and easy to replace, minimising downtime

 

APPLICATIONS

• Water treatment
• Ponds & Domestic applications
• Medical and health technology
• Aeration of fuel cell stacks
• Aqua-air-lights and design pillars

Technical:

• Max Flow: 60 Litres per Minute
• Optimal Operating Pressure: 0.20 Bar
• Connector Size: 19mm
• Sound level (at 1.5m): 38dB
• Voltage: 230 VAC

Please note: The Secoh S-series air blowers come with a standard EU plug, these can be removed without effecting warranty

 

TANK SERVICING

Why does my system need serviced?

• It’s important that your sewage treatment plant or septic tank system is emptied and maintained regularly to continue operating optimally.
• Poorly performing systems can cause serious health hazards as well as local pollution risks.
• Recent Building Regulations (Part H 2010 – BS EN 12566) state that regular emptying and maintenance of small sewage treatment plants must be undertaken by the homeowner at least once per year, or as per the manufacturer’s guidelines.
• As a homeowner, you must also ensure that your system remains in good order and replace it when necessary.
• We do recommend that you keep a detailed log of when your system is inspected, maintained, emptied or serviced as you may need these details in future.
• Our treatment plant service includes a full check to ensure everything is in perfect working order.
• Our team can be reached on helpingyou@kingspan.com or 033 240 6868
• Current lead time is 7–10 days for service visit

 

Postcode exclusions apply to AB, BT, DD, EH, FK, G, GY, HS, IM, IV, JE, KA, KW, KY, ML, PA20+ & PH, PO30+, ZE

 

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.