Stuart Turner Mainsboost iBoost - F200-100-45


Product Ref: 46668


Home Delivery

UK mainland delivery from FREE ex VAT

check delivery cost


Product Description

Mainsboost Flomate iBoost Home Booster set- F200-100-45

Mainsboost iBoost provides a boosted cold water supply of up to 100 litres per minute and up to 4.5 bar pressure, with a typical performance of 60 litres per minute at 3.0 bar pressure to inadequate flow rates and water pressure, offering a better solution..

Ideally suited to high occupancy properties with multiple bathrooms and water using appliances.

Combining a 200 litre cold water storage tank and a high performance, multistage pump to over come restricted water flow and insufficient pressure.

Simple to operate, the iBoost F200 sits neatly within any standard 600mm kitchen cupboard or alongside other household white appliances. Available with either fixed or variable speed pump controls and with the optional iBoost +200 extension tank, increasing the storage tank form 200 litres to 400 litres. Installation is simple for the iboost +200 extension tank; the kit supplied will allow you to connect the tank to th main iBoost unit.



  • 3 year warranty
  • Compact, space saving design, fits within a 600mm cupboard
  • Boosts cold water mains supply to 4.5 bar
  • 200 litre water storage capacity
  • Quiet operation
  • WRAS Approved Product
  • Fixed speed pump control system
  • High flow, low noise equilibrium fill valve
  • Control panel and status indicators
  • Dry run protection


Mainsboost iBoost F200-100-45 Specifications

 Manufacturer Stuart Turner
 Manufacturer's Warranty 3 years*
 Pump Type Multistage Centrifugal
 Water Tank Nominal Size 220 Litres
 Water Tank Usable Capacity

200 Litres

 Dimensions (width x depth x height) 536 x 529 x 1504 mm
 Weight (including fittings) 55 kg
 Power Cable Length 3 m (pre-wired)
 Max. Head - Closed Valve (metres) 45 m
 Max. Flow (Litres per minute) 100 L/min
 Max. ambient Air Temp. (continuous) 30 °C
 Power Supply 230 V a.c. / 1 / 50 Hz
 Motor Type Induction motor (auto-reset thermal trip)
 Duty Rating Continuous (S1) @ 5 l/min and above




All our Booster pumps are for delivery by customer offload. This entails the customer to acquire the right manpower and/or machinery to help unload the tank/s from the delivery vehicle.

If you require any specific requirements regarding delivery, please call us before order is placed, where we will try and accommodate this facility for you.


Product Details

  • Product Code: STUT
  • Brand: Stuart Turner
  • Twin or Single: Single
  • WRAS: Yes


Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.


Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.


HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Returns Information

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.