3090 Litre Type AB Air Gap GRP Break Tank, Insulated, Cat 5

Purewater 3090 Litre Type AB Air Gap GRP Break Tank, Insulated, Cat 5

3090 Litre Type AB Air Gap GRP Break Tank, Insulated, Cat 5

Product Ref: PW3090-1-AB

available Available (allow 5 days for delivery)

£3,750.00 ex VAT
(£4,500.00 inc VAT)


Product Description

3090 Ltr Type AB Air Gap GRP Break Water Tank - Insulated (25mm) Cat 5 Full WRAS approval.

Please note this tank comes with the following fitted - Screened spillover 640 L x 150mm H fitted to float valve housing with shroud, 65mm Equilibrium float valve c/w drop arm, 4' screened overflow complete and 2 1/2' BN PVC tank conn c/w flange/NP16 backing ring.

Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.

All internal surfaces, including the lid, have an Isophthalic white gelcoat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gelcoat layer is reinforced by the main GRP laminate which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.

After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections which are then assembled once the restriction has passed. In a nutshell and a one piece tank in two or more bolt together sections. All of the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.

Water can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.

Annual Disinfection Information and Options

  • Designed for easy installation, saving time and money

  • We can offer monthly, yearly and fixed priced packages ranging from 1-3 years

  • All work is carried out by CSCS qualified engineers

  • Tank upgrade works available, bringing the old tanks up to current regulations

  • Full tank replacement works available

  • Legionella risk assessments including schematic drawings if required

  • Microbiology analysis - water sampling via UKAS approved laboratories

  • Building flush and mains injection

  • Commissioning of booster sets

  • Servicing of water softners and booster sets

  • Replacement of hollow roof struts.

  • Insulating of existing cold water storage tanks

  • Please note the image is for display purposes only and will come with a float housing on the top

Product Specification

  • Product Code: PW
  • Material: GRP
  • Potable: Potable
  • Shape: Rectangle
  • Tank Use: Above Ground
  • WRAS Approved: Yes
  • Volume: 3090ltr
Home Delivery

UK mainland delivery from £160.00 ex VAT

check delivery cost

You Can Also...

Get help or write a review...

ask a questionwrite a reviewrequest a price match