18' - Deso or Atlas BLACK LID (Old Style)
Replacement lockable 18" lid (approx. dimension) for DESO or ATLAS bunded oil tank only.
Old Style; operated by triangle plastic key - Will fit ALL OLD Bunded Tanks
Comes commplete with hinge
Please Note: These lids are not interchangeable between old & new tanks
CIM-TEK HYDROSORB 70062 FILTER 10 MICRON WATER BLOCK
CIM-TEK HYDROSORB 70062 FILTER 10 MICRON WATER BLOCK
Cim-Tek Filtration, the world leader in fuel filter technology. They offer the ideal solution to ULSD Diesel filtration with the patented HydroSorb range of filters for particles and water removal. HydroSorb has a high particle and water holding capacity to ensure cleaner fuel
Filter part number - CT70062
10 Micron with water block
1''...
NEOPRENE WASHER 86X56X3.5MM
NEOPRENE WASHER 86X56X3.5MM Description0
Replacement keys For FuelMaster (Pack Of 2)
Replacement keys For FuelMaster (Pack Of 2)
Tigerloop Original De-Aerator - External Fitting **Multibuy offer**
Tigerloop Original De-Aerator - TON110i - Pack of 5
The Tiger Loop removes air from heating oil and is fitted on the outside wall of the property, between the tank and the pressure jet burner. This allows the tank to be installed lower than the burner. The Tiger Loop can draw fuel from up to 30m away with a 10mm fuel line. Suitable for oil and kerosene. 1/4" F BSP.
Included:
Tigerloop...
Cim-Tek Filter Head/Adaptor 260 Series
Cim-Tek Filter Head/Adaptor 260 Series
This Cim-Tek filter head/adaptor fits all the below elements, particles or water & particles, 10 or 30 micron this head/adaptor fits them all
Cim-Tek ref 260 series 50009 BSP filter head/adaptor 1"BSP female ports
Fits the following elements 70010, 70012, 70067, 70062, 70236
CIM-TEK HYDROSORB 70062 FILTER 10 MICRON WATER BLOCK WITH FLANGE
CIM-TEK HYDROSORB 70062 FILTER 10 MICRON WATER BLOCK WITH FLANGE
Filter part number - CT70062
10 Micron with water block
1'' BSP Female thread
Not suitable for gravity feed
Suitable for use with pumps
70 lpm
For use with Ultra Low Sulphur Diesel
Filter Height - 8''
Flange
DESO Metal Keys and Lock Barrel
DESO Metal Keys and Lock Barrel
Spare metal keys (comes as pairs) with a replacement lock barrel for most DESO bunded oil tanks from 2010.
Kingspan - High Oil Outdoor Alarm
Kingspan - High Oil Outdoor Alarm
The Kingspan separator Oil alarm is powered by mains & is supplied with a control unit and a Grease Conductivity probe.
You can monitor up to 3 probe units, and the outlet relay enables the status of each unit to be signalled to a remote location of your choosing. The alarm can be installed up to 300m from the control panel (Cabling will need to be purchased...
TITAN 16' OIL TANK LID RED
TITAN 16'' OIL TANK LID RED
Replacement 16'' (approx. dimension) oil tank lid for TITAN oil tanks and some ATLAS tanks. Old style red arm hinged lid.
TM430 Level Indicator
TM430 Level Indicator
TM430 - Tank Master Monitoring Gauge for 430 litre Tank Master Tanks, these gauges come with a long stem that reaches into the tank and reads the level.
TM900 Level Indicator
TM900 Level Indicator
TM900 - Tank Master Monitoring Gauge for 900 litre Tank Master Tanks, these gauges come with a long stem that reaches into the tank and reads the level.
Watchman SENSiT Domestic Oil or Water tank Monitor/ Gauge
Smart WiFi tank level monitoring System. Monitor your oil tank contents 'at a glance' from your phone.
Watchman SENSiT Smart WiFi tank level USB receiver
Convert your Watchman SENSiT ready tank to a Smart WiFi tank level monitoring System, with this USB receiver. Monitor your oil tank contents 'at a glance' from your phone.
Watchman Sonic Advanced
Monitor your oil tank contents 'at a glance' from your home.
Watchman Sonic
Monitor your oil tank contents 'at a glance' from your home.
TIGERLOOP BIO DE-AERATOR - INTERNAL/EXTERNAL FITTING
TIGERLOOP BIO
The new and improved third generation automatic oil de-aerator.
The Tigerloop Bio pre-heats the oil to at least room temperature by absorbing the heat from the boiler room and friction heat from the oil pump.
The Tigerloop Bio is used in combination with a separate oil filter.
The benefits of Tigerloop are applicable anywhere you use a light oil burner. The Tigerloop Bio is...
TIGERLOOP ORIGINAL DE-AERATOR - EXTERNAL FITTING
Product Description
Tigerloop Original De-Aerator - TON110i
The Tiger Loop removes air from heating oil and is fitted on the outside wall of the property, between the tank and the pressure jet burner. This allows the tank to be installed lower than the burner. The Tiger Loop can draw fuel from up to 30m away with a 10mm fuel line. Suitable for oil and kerosene. 1/4" F BSP.
INCLUDED:
Tigerloop...
TIGERLOOP COMBI 3 DE-AERATOR - EXTERNAL FITTING
Tigerloop Combi 3 De-Aerator - TCN110i
The Tigerloop Combi removes air from heating oil and is fitted on the outside wall of the property, between the tank and the pressure jet burner. This allows the tank to be installed lower than the burner. The Tiger Loop can draw fuel from up to 30m away with a 10mm fuel line. Similar to the basic TigerLoop Original, but with integrated disposable filter. Suitable...
Bundman Sensor Unit
WATCHMAN BUNDMAN
The Watchman Bundman is a battery powered device which detects leakage from the inner tank of a double skinned / bunded tank. The device detects any liquid in the outer bund using a liquid sensor float switch which continuously monitors the bunded area, checking for the presence of liquid. This therefore gives an indication of a ruptured tank or a loss of weather-proofing with water...
TITAN OIL TANK TOP OUTLET
Comes supplied with flexible suction pipe and float
Red valve lever
Oil supply connection for pipe
Return inlet connection (if required)
Connection Dia. 3/8” to take 6/8/10mm pipework
1' TANK REDUCER
1" TANK REDUCER
25mm reducer Oil tank reducer
BOTTOM OUTLET KIT
BOTTOM OUTLET KIT (Oil Tank Fitting Kit)
This kit includes practically everything you need to connect your heating oil tank to the supply pipe.
INCLUDES THE FOLLOWING:
Isolation ball valve
52 micron disposable nylon filter element
10mm copper compression fitting outlet
1" male BSPT tank fitting adaptor
Roll of PTFE tape
Oil Tank Filter Maintenance Kit
Oil tank filter kit
ATLAS KEYS
Otherwise known as the ' 196 Key ' - this will suit the Deso/Atlas/Titan front stule lid locks.
These will come in a pair.
19'' Retrofit Green Screw Cap
19' RETROFIT GREEN SCREW CAP
19 inch retrofit lid includes sealant lid
FUELMASTER & TRUCKMASTER LOCK
Lock for all Titan FuelMaster and TruckMaster tanks.
Will come with a set of keys as standard
2'' OFFSET FILLER CAP
2'' cap used on the offset fill-point.
This is a standard part right across the Titan range.
Cap can also be purchased as part of a complete offset fill-point (0019606)
8'' Oil Tank Lid
8 Inch lid (c/w bar and pin) for old oil tanks
The 8” cap lid only fits very old (obsolete) Tyrrell tanks, it can be used for similar sized tank necks but some modifications may be required.
ATLAS 16' OIL TANK LID BLUE
ATLAS 16" OIL TANK LID BLUE
Replacement lockable 16" lid (approx. dimension) for ATLAS bunded oil tanks only. 16" diameter manhole lid 'Quarter Turn' style Manhole Access Point.
Supplied complete with:
Lockable Plastic Manhole Lid
Retention Ring
Weatherproof Gasket
18' - Deso or Atlas BLACK LID (New Style)
Replacement lockable 18" lid (approx. dimension) for DESO or ATLAS bunded oil tank only.
New Style; operated by silver key - Will fit ALL NEW BUNDED Tanks
Please Note: These lids are not interchangeable between old & new tanks
ATLAS 6' OIL TANK LID
ATLAS 6" OIL TANK LID
Replacement 6" (approx. dimension) lid (including steel pin and R clip) for a ATLAS oil tank only
Fits onto the tank inspection point/inlet.
TITAN 16' HINGED OIL TANK LID GREEN
Replacement 16'' (approx. dimension) oil tank lid for TITAN oil tanks only. Old style green arm hinged lid.
Includes the gasket 0000325.
This lid is for the older Titan bunded tanks (pre 2004/2006 approx.)
TITAN 19' OIL TANK LID
Replacement 19''(approx. dimension) oil tank cap lid for TITAN oil tanks only.
This lid is for the newer Titan bunded tanks (after 2004/2006 approx.)
TITAN 24' OIL TANK LID
Replacement 24'' (approx. dimension) oil tank lid for TITAN oil tanks only.
TITAN 4'' OIL TANK LID
TITAN 4'' OIL TANK LID
Replacement 4'' (approx. dimension) screw cap for TITAN bunded oil tanks only. Fits onto the 4'' tank inspection point/inlet (old Style).
Please Note:
Only the lower rubber seal is included in this product.
TITAN OIL TANK 2'' VENT CAP
TITAN OIL TANK 2'' VENT CAP
Replacement 2'' vent cap for TITAN oil tanks only.
TITAN OIL TANK 6' INSPECTION CAP
TITAN OIL TANK 6' INSPECTION CAP
Replacement cap for TITAN oil tanks only.
Fits onto the tank inspection point/inlet (new style).
LOCKING LOOP & NUT
This locking hoop and nut can be used for all tanks within the Titan range.
LID LOCKING STUD
Button lock for 19'' Titan Oil Tank Lid and 6'' Titan Oil Tank Inspection Cap.
OFFSET FILL ASSEMBLY COMPLETE
2'' offset fill-point which can be used across the range of Titan oil tanks and any other type of plastic oil tank.
This comes complete both gaskets, aluminium locking nut and the offset cap.
TITAN 1/2' BALL VALVE
This ball valve can be used across the entire Titan tank range. (1/2'' connection for tank pack)