2000 Litre Single Axle Highway Water and Drinking Water Bowser
Industrial Water bowser for the transport and storage of drinking water. Road bowsers are primarily for high speed operation on the road full or empty at speeds up to 60MPH, they can be towed off road at slower speeds, they are fitted with either a 40mm ring eye or a 50mm ball coupling.
Chassis - Constructed from 5MM pressed steel section fully welded with a front standing plate and an ‘A’ frame DRAWBAR.
Axle/Suspension - SIingle Avonride torsion beam axle fitted with 300 X 60 auto reverse brakes.
Wheels and Tyres - 2 No. 235 /85 x 16 12 ply radial tyres on 5 stud 6.1/2” PCD rims.
Coupling - Knott 3000KG capacity posibrake over run auto reverse c/w breakaway cable, spring assisted handbrake lever, fitted with 40mm eye or 50mm ball
Ancillary Equipment - Steel mudguards, front telescopic jockey wheel, full road lighting c/w 7 pin plug.
Ellipical in section,with internal anti surge baffle, 2” front draw off, 2 rear outlet connections polytheylene, fitted with an 18” lockable OUTER HINGED manlid cover, inner sealed vented manlid. Tank secured to chassis with 2 stainless steel straps.
Poly tank in yellow, green or drinking water blue. chassis primer and two top coats in BS colour, galvanised optional. Optional (extras) 1" Petrol Pump which can only be used in conjunction with the Extended Chassis
To use the shipping estimator please select the * Required Fields (if applicable) shown on product above, then enter the quantity required (below) to obtain a carriage estimate.
Please call us for delivery to postcodes in Wales, Scotland, Highlands and Islands.
Length: 3.53m (139”)
Width: 1.982m (78”)
Height: 1.60m (63”)
Towing Height: 480mm
Unladen Weight: 600kg
Laden Max: 2800kg