2000 Litre GRP Sectional Water Tank, Internally Flanged Base, AB Airgap (IFB)

2000 Litre GRP Sectional Water Tank, Internally Flanged Base, AB Airgap (IFB)

Product Ref: PW.1x1x2.IFB-AB

Customer Offloading GRP Made to Order, Non Returnable Product Made to Order, Non Returnable Product Yes
  • Volume: 2000ltr
  • Dimensions: L:1150mm W:1150mm H:2550mm
  • Home Delivery

    UK mainland delivery from £183.00 ex VAT

    check delivery cost

    updown
    from £1,925.00 ex VAT
    (£2,310.00 inc VAT)
    Product Description

    2000 Litre Sectional Water Tank, Internally Flanged Base (IFB)

    2000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.

    Insulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.

    IFB tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. 

    IFB tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and/or 350 mm above any raised float valve housing. 

    Optional Extras:

    • Screened lid vent
    • Screened overflow ¾'' (22 mm) up to 4" 
    • Screened warning pipe ¾'' (22 mm)
    • BSP female tank connector 1" up to 4" 
    • Lid mounted level switch to suit high or low warning Temperature sensor

    Important: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. 

    An Internally Flanged Base Tank (IFB) is the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.

    Applications where there is sufficient working room all around the tank.

    Comprising: Internally flanged base, externally flanged sides, internally flanged roof. 

    Insulated to the sides and cover only.

    Specification:

    • Insulation: 50 mm Fully Encapsulated to Sides
    • Panel Size: 1000 x 1000 mm
    • Side Panels: Externally Flanged
    • Base Panels: Internally Flanged
    • Heavy Duty Lid: Internally Flanged
    • Internal fixings: Stainless Steel
    • External fixings: Galvanised
    • Man way: Included, providing 800 x 800 mm access opening
    • Foundation Levelling Steels:  Included (To suit flat structural foundation pad)

     

    PW.1x1x2.IFB-AB Specifications

     Airgap AB
     Single or twin compartment (Divided) Single
     External Dimensions 1150 x 1150 x 2550 mm high
     Assembly area required 2150 x 2150 x 3050 mm high

     

     

    Does your water tank need a clean?

    Water can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.

    Annual Disinfection Information and Options

    • Designed for easy installation, saving time and money
    • We can offer monthly, yearly and fixed priced packages ranging from 1-3 years
    • All work is carried out by CSCS qualified engineers
    • Tank upgrade works available, bringing the old tanks up to current regulations
    • Full tank replacement works available
    • Legionella risk assessments including schematic drawings if required
    • Microbiology analysis - water sampling via UKAS approved laboratories
    • Building flush and mains injection
    • Commissioning of booster sets
    • Servicing of water softeners and booster sets
    • Replacement of hollow roof struts.
    • Insulating of existing cold water storage tanks

     

    Delivery

    All our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and/or machinery to help unload the tank/s from the delivery vehicle.

    If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.

    Assembly Zones

    On Site assembly by a nationwide network of highly trained engineers, enabling us to get to you no matter where you are. Hand-picked by the manufacturers of the GRP Tanks themselves.

    Having your Sectional tank assembled on site saves all the hassle of piecing the tank together, being cost-effective and also validating the warrantee.

    Another process to save time and worry is to have your new sectional tank cleaned once installed. This process is normally put on the back burner, however once an engineer has entered the tank, drilled holes, set the tank up, the tank has contaminants within it which can harbour harmful bacteria, so it's a good code of practice to get the tank cleaned once assembled on site. You can select this option above, or you can contact us for a quote.

    To view the areas which the option of assembly is offered, please see below for postcodes, or click here for a more in-depth view.

    If this is required, please select the correct Zone for your postcode in the drop-down options above - Do you require on site assembly?, select yes and then the zones will appear for you to select.

    If your postcode is not included within these zones, please feel free to contact us for a quote.

     

    ZONE 1 - Midland Area Postcodes

    B, CV, CW, DE, DY, GL, HR, LE, MK, NG, NN, OX, SG, ST, WR, WS, WV

     

    ZONE 2 - London Area Postcodes

    AL, BR, CM, CR, DA, E , EC, EN, GU, HA , HP, IG, KT, LU, N, NW, RG, RH, RM, SE, SL, SM, SS, SW, TW, UB, W,  WC, WD

     

    ZONE 3 - East / South East Area Postcodes

    BN, CB, CO, CT, IP, ME, NR, PE, TN

     

    ZONE 4 -  South West Area Postcodes

    BA, BH, BS, DT, EX, PL, PO (Excluding IOW), SN, SO , SP, TA, TQ, TR (Excluding Islands)

     

    ZONE 5 -  North West Area Postcodes

    BB, BD, BL, CA, CH, FY, HD, HX, L, LA, M, PR, OL, SK, WA, WN

     

    ZONE 6 -  North East Area Postcodes

    DG, DH, DL, DN, HG, HU, LN, LS, NE, S, SR, TD, TS, YO

     

    ZONE 7 - Wales, Mainland

    CF, LD, LL, NP, SA, SY, TF

     

    ZONE 8 - Edinburgh & Glasgow

    EH, G

    Delivery

    Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

    Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK,G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

    Our lead times should only be used as a guide and are subject to change.

    Offloading

    Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

    We recommend installers and/or plant hire & materials for install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

    If you have any questions regarding your delivery please contact the Sales Team on 01643 703358.

    Returns Information

    Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to 4.6 & 4.7. **

    Please be aware that returning a tank can be complicated and expensive so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

    If you wish to return goods, please complete the form on this page to provide further information.

    Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

    Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

    Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

    Please click here to request a return

    Product Specification

    • Product Code: PW
    • Customer Offloading: Customer Offloading
    • Material: GRP
    • Stock tank: Made to Order, Non Returnable Product
    • WRAS: Yes