Best Selling
Klargester 2,800 Litre Shallow Dig Silage Tank
Klargester 2800 Litre Shallow Dig Silage Tanks
Klargester below-ground Silage Tanks provide a reliable solution for the collection and retention of sewage, surface water, veterinary/animal waste, firefighting reservoirs and rainwater harvesting reservoirs.
Designed in accordance with BS6297, ensuring that you meet all building regulations, our silage tanks are manufactured from strong, durable...
Ultrasteel 120 Litre Indirect - Unvented Hot Water Cylinder
120 litre Indirect Kingspan Albion Ultrasteel Unvented Cylinder - AUI120ERP
Ultrasteel cylinders deliver high flow rates and mains pressure hot water (regulated up to 3 bar) for powerful showers and the fast filling of baths or sinks, making them ideal for homes with multiple bathrooms or extra utility rooms. Manufactured from high-grade engineering materials, such as 'Duplex' stainless...
1300 Litre Slimline Bunded Fuel point
Harlequin 1300 Litre Slimline Bunded Fuel Point
Harlequin 'Fuel Points' are ideal for smaller, commercial, industrial and agricultural installations, where the added value technologies featured in the 'Fuel Station' models are not a requirement.
The 1300 Litre Slimline Fuel Point is the narrowest diesel dispensing tank within the Harlequin range and is ideal for properties where...
16,000 Litre Galvanized Steel Water Storage Tank
16,000 Litre Galvanized Steel Water Storage Tank
Galvanised Steel Water Tank 16000 Litres, corrugated Galvanized steel water tanks designed specifically to hold large quantities of water. The steel is approved to BS2989:1982 and is galvanized with lead free zinc to 275g/m² to EN10142.
There is a minimum safety margin of 40% - this means that the structural strength of the tank is capable...
160 Litre Type AB Air Gap GRP Water Tank, Insulated
160 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5
Tank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with...
BA-BC Biodisc Smart Alarm kit
BA-BC Biodisc Smart Alarm kit
Suitable for lots of units that need to have a high level alarm - this is great for any Cesspool or Small Pump-chamber to advise when unit is full. Also, a small discharge pump or Air-blower can be wired into this panel.
Kit Includes :-
Control Panel
Low Voltage Beacon
High Level Float Switch
Lose of Rotation
2000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided
2000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided
2000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.
What's the Divided Section for in a sectional tank?
Tanks with an internal division, which is also known as a maintenance...
Klargester 3800 Litre Shallow Dig Silage Tank
Klargester 3800 Litre Shallow Dig Silage Tanks
Klargester below-ground Silage Tanks provide a reliable solution for the collection and retention of sewage, surface water, veterinary/animal waste, firefighting reservoirs and rainwater harvesting reservoirs.
Designed in accordance with BS6297, ensuring that you meet all building regulations, our silage tanks are manufactured from strong, durable...
Clearwater 3,800 Litre Shallow Dig Cesspool
Clearwater 3,800 Litre Shallow Dig Cesspool
Cesspool tanks are used for domestic sewage disposal where connection to a mains sewer is not practical.
They are designed for storage only, with their contents being emptied at regular intervals by a waste tankers.
Features:
Reduced installation costs – less soil disposal and excavation costs
Manufactured from GRP and EN12566-1 approved
99.7%...
37,000 Litre Galvanised Steel Water Storage Tank
37,000 Litre Galvanised Steel Water Storage Tank
Galvanised Steel Water Storage Tank 37500 Litres, corrugated Galvanized steel water tanks designed specifically to hold large quantities of water. The steel is approved to BS2989:1982 and is galvanized with lead free zinc to 275g/m2 to EN10142.
There is a minimum safety margin of 40% - this means that the structural strength of the tank is capable...
4079 Litre GRP Sectional Water Tank, Totally Internally Flanged (TIF)
4079 Litre Sectional Water Tank, Totally Internally Flanged (TIF)
4079 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly. Comes with man way access
Insulated and WRAS approved for use with potable water. Suitable for a variety of applications including...
4079 Litre GRP Sectional Water Tank, 2x1.5x1 Totally Internally Flanged (TIF)
4079 Litre Sectional Water Tank, Totally Internally Flanged (TIF)
4079 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and Internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.
Insulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater...
Enduramaxx 720 Litre Slimline Water Tank, Potable
Enduramaxx 720 ltr (160 Gallon) Slimline potable water tank
This Enduramaxx 720 ltr (160 Gallon) Slimline water tank is an ideal solution for rainwater storage and rainwater harvesting. This modular format allows for easy interconnection.
The 18” twist lid manhole with smaller twist lid of 4” in the middle of the lid enables easy access to the inside of the tank. Ideal...
1200 Litre Basement Sump Pump System, 6m Lift
1200 Litre Basement Sump Pump System, 6m Lift - EF Micro 1200
Suitable for Removing Grey Water From: Final Effluent from Sewage Treatment Plants, Drainage of Cellars & Basements, Sinks, Showers, Kitchens & Dishwashers. A packaged pump station is used when gravity drainage on site cannot be achieved. The Micro Effluent is suited for clean, dirty or slightly polluted water. This unit has...
4000 Litre GRP Sectional Water Tank, Internally Flanged Base, Divided, AB Airgap
4000 Litre Sectional Water Tank, Internally Flanged Base (IFB), Divided, AB Airgap
4000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.
Insulated and WRAS approved for use with potable water. Suitable for a variety of applications including process...
HS2.75 110v Automatic Submersible Site Drainage Pump
HS2.75 110v Automatic Submersible Site Drainage Pump
The HS series are 50 mm (2”) and 80 mm (3”) submersible pumps with motor sizes in 400watt and 750watt. The models HS2.75S and HS3.75S offer increased head and flow capability over the HS2.4S. All models have a solid cast aluminium body, cast iron pump casing and an impact resistant PVC strainer base for durability during robust handling....
501 Litre GRP Water Tank
501 Litre GRP Water Tank
Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost) Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination...
13,000 Litre Water tank
13000 Litre Ecosure WRAS Approved Water Tank
Ecosure's 13,000 Litre water tank is manufactured using WRAS approved polyethylene. This tank is perfect for commercial and agricultural usage and with its large 13,000 capacity it is ideal for potable/drinking water storage.
A 2" plastic threaded male outlet and isolation valve are supplied loose as standard, but the tank can accept up...
1190 Litre - Grey Water, Surface and Ground Water AquaTank Twin Pump Station
1190 Litre AquaTank Pro - Grey Water, Surface and Ground Water Twin Pump Station
The AquaTank Pro package pump station is designed to collect groundwater via a perimeter channel or 110 mm pipe and/or clear opening to the top of the chamber. The AquaTank Pro comes with a twin pump arrangement, this gives peace of mind, knowing that you always have a back-up pump. For further peace of mind we can...
570 Litres GRP Water Tank - Two Piece Insulated
570 Litres GRP Water Tank - Insulated (25 mm) Full WRAS approval
Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes....
Galvanised Steel 2 Drum Spill Pallet
Galvanised Steel Drum Spill Pallet SP2 suitable for 2 x 205 Litre drums
Robust steel spill pallets for use in harsh working environments or where compatibility with plastic is an issue.
Manufactured from 2 mm structural grade galvanised steel, this spill pallet is designed to accommodate 2 x 205 ltr drums and has a sump that complies with the 110% rule on sump capacities, four galvanised legs...
Sinus Filter
Sinus Filter
Rainwater Filter for installation within rainwater tanks. Ideal for conversion of existing tanks, because the 3P Sinus Filter has no height difference between rainwater inlet and outlet to the waste water sewer. The filter cartridge lies diagonally in the housing, therefore even more water can be in comparison to conventional filters.
Low maintenance, depending on the contamination.
Connection...
1400L Storage Container with Lockable Lid
1400 Litre Storage Container with Lockable Lid - PSB3
Multi use large capacity lockable storage container for both interior and exterior use, this container is suitable for use with liquids or dry powders.
Manufactured from medium density polyethylene
Capacity of 1400ltr
Push fi t lid with a fi tted lock & hinge set
Variety of applications
Broad range chemical compatibility
Lid...
680 Litre GRP Water Tank
680 Litre GRP Water Tank
Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination...
Single Pump Variable Speed Booster Set, 75l/min @ 7.0 Bar
Wras Approved Single Pump Variable Speed Booster Set, 75l/min @ 7.0 Bar
The Tank's Direct single pump constant pressure cold water booster set, is designed to increase the pressure of water services within a building where the existing incoming main is not sufficient. If the supply of water fails during operation, the pump automatically shuts down to prevent damage and re-starts again once...
750 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5
750 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5
Tank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with...
712 Litre GRP Water Tank, Insulated -Two Piece Insulated
712 Litre GRP Water Tank, insulated, (25 mm) Full WRAS approval.
Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost) Only materials of the highest quality are used along with a highly efficient manufacturing processes....
9000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB)
9000 Litre Sectional Water Tank, Internally Flanged Base (IFB)
9000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly. Comes with man way access
Insulated and WRAS approved for use with potable water. Suitable for a variety of applications including process...
2,500 Litre Water tank, Non Potable, 2' Outlet
2,500 Litre Water tank
Ecosures 2500 Litre above groundwater tank is made from industrial strength MDPE (medium Density polyethlyene) and are ideal for both domestic and commercial use.
Low in height and with its 16" access hatch, this water tank is easy to fill and also to access for pump installation. UK designed and manufactured, it is a heavy-duty product which comes with a 10-year guarantee...
1501 Litre GRP Water Tank
1501 Litre GRP Water Tank
Tank manufactured with WRAS approved materials. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing...
20000 Litre GRP Sectional 5x2x2 Water Tank, Internally Flanged Base, Divided, AB Airgap
20000 Litre Sectional Water Tank, Internally Flanged Base (IFB), Divided, AB Airgap
20000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.
Insulated and WRAS approved for use with potable water. Suitable for a variety of applications including process...
20000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided
20000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided
20000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.
What's the Divided Section for in a sectional tank?
Tanks with an internal division, which is also known as a maintenance...
1.25' Single Pump Booster Set, Fixed Speed 100 l/min @ 3.5 Bar
1.25' Single Pump Booster Set, Fixed Speed 100 l/min @ 3.5 Bar
The Tanks Direct single pump constant pressure cold water booster set, is designed to increase the pressure of water services within a building where the existing incoming main is not sufficient. If the supply of water fails during operation the pump automatically shuts down to prevent damage and re-starts again once water is restored....
1590 Litre GRP Water Tank - Two Piece Insulated
1590 Litre GRP Water Tanks - Insulated (25 mm) Full WRAS approval
Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes....
1590 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5
1590 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5
Tank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life...
3000 Litre GRP Water Tank
3000 Litre GRP Water Tank
Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these...
2726 Litre Open Top GRP Water Tank
Open-top GRP Water tank 2500 Litres
Open-top GRP tank. General purpose open-top water tank, also suitable for a wide range of other liquids
Dimensions
Internal Dimensions
External Dimensions
L x W x H (mm)
1828 x 1220 x 1220
1953 x 1345 x 1225
9000 Litre Divided GRP Water Tank, Insulated
9000 Litre Divided GRP Water Tank - Insulated (25 mm)
Manufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.
Fully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional...
3750 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5
3750 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval
Tank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm.
A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra
Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring...
Venezia 900 Submersible Water Pump - 280LPM
Venezia 900 Submersible Pump
The Venezia submersible pump is an electric 230V pump for clean water, waste water or slightly dirty water. It has a max flow rate of 280lpm
Specification:
12.4 m max head
280 Lpm max flow
230 Volt 0.8 Hp 3.2 Amp motor
Integrated auto stop/start switch
Polypropylene body
Techno polymer impeller
Class F insulation, IP68
9 mm free passage
5 m...
Nestable Stacking Tank / Storage Container 145L
Nestable Stacking Tank / Storage Container 145L - ST145
Nestable polyethylene, open top, tank bins / storage containers for wet or dry ingredients, materials or components, these easy-clean containers are lightweight yet highly durable
ST145 product features:
Robust, rotationally moulded construction for long working life
Tapered, nesting design saves space when not in use
Smooth...
Meal Storage Bin 750kg
Meal Storage Bin (750kg)
1 Step Mounting Block
1 Step Mounting Block
Mounting Blocks not only look great, but recent European studies prove that mounting blocks are essential item for reducing the strain on your horses back. Available in a choice of colours and sizes, the standard range is ideal if you are looking for a mounting block to take to shows with you. Although still very strong and sturdy, they are lighter than our premium mounting...
12000 Litre Bladder Tank, Potable
12000 Litre Bladder Tank, Potable
Flexible Bladders for storage of POTABLE Water, FIRE Prevention Water Storage, remote areas, commercial drinking water supply and other Camp needs such as catering and showers. These collapsible pillow tanks are ideal for emergency relief use, festivals, transporting empty tanks to difficult locations.
Collapsible tank for drinking water is designed to provide...
15000 Litre Bladder Pillow Water Tank Flexible, Non Potable
15000 Litre Bladder Pillow Water Tank Flexible, Non Potable
Collapsible Pillow Tanks for Non-Potable Water. Flexible Bladders for storage of NON POTABLE Water. These collapsible pillow tanks are ideal for emergency use, fast deployment, marquees, transporting empty tanks to difficult locations. A range of flexible bladder tanks for Non-Potable water, Dilute Chemicals, Sludges and Effluents.
The...
2' Ball Valve Stainless Steel
2' Ball Valve Stainless Steel
Stainless ball valve tap. 2' Ball Valve Stainless Steel 50mm. Lockable
The 2" ball valve of stainless steel is a versatile valve that is commonly used for controlling the flow of liquids in various applications. It features a durable stainless-steel construction, which provides excellent resistance to corrosion and ensures long-lasting performance.
Designed...
2' BSP Essex Flange, E1R
Essex Flange Brass tapped BSP thread 2" E1/R
Essex flanges BSP Female. Simple cost effective fitting and manufactured from solid brass to ensure a water tight connection. The connection has a female BSP thread running through it and is suitable for a variety of male threaded connections and ancillaries including:
- Male threaded pipework fittings and adaptors
- Level control equipment
- Temperature...
3' Male BSP Camlock Ball Valve
3' Male BSP Cam-lock Ball Valve
ARAG 3' BSP Male x Cam-lock male Adaptor BSP Ball Valve is a specialised type of ball valve that is designed with a male BSP (British Standard Pipe) threaded end on one side and a male Cam-lock adaptor on the other side. This unique configuration allows for easy connection and disconnection to hoses or pipes with cam-lock fittings.
It features a 3"...