FCZ Adblue Pump

Pump

Pump Body: Polyamide 66

Pump Cover: Polyamide 66

Inlet/Outlet Sigots: Polyamide 66

Check Valve: Viton

Diaphragm: Polyphenylene Vinylene

Included Fittings: 2x 1" to 20mm hosetails, 2x 25mm Hosetails

FCZ Adblue Pump.

These pumps are for pumping Adblue and other liquids from the urea manufacturing process. They are diaphragm pumps, with by-pass valves and integral on/off switches.

They are only for intermittent not constantly running use, they have a duty cycle of 20 minutes. These pumps are supplied with 1" FBSP inlets and outlets but they also include 25mm and 20mm hose tails for use with flexible hose if you wish to use this instead. The 12v and 24v varieties come with crocodile slips for attaching to the power source.

Supplied as “pump only”, optional extras to create a pumping kit include manual nozzles*, discharge hose, suction hose (with a foot valve) and fl owmeter. They MUST NOT pump petrol, high viscosity liquids, chemicals, solvents or products with a low fl ash point.

Some vehicles will not accept this 1" size of nozzle 1" - Any queries please let us know in advance.

• Product Code: DPT
• Delivery: Fast Delivery
• Outlet Size: 1" BSP Female

Pump Motor 

Enclosure: IP55 Rated

Insulation: Class E

Cable: 1 Meter (Rubber)

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.