1125 Litre EU Highway Water Bowser with Rainmaker Combo

1125 Litre EU Highway Water Bowser with Rainmaker Combo

Product Ref: 1125Litre3000psiHIGHWAYRAINMAK

MDPE
  • Volume: 1125ltr
  • Weight: 375.000kg
  • Dimensions: D:3530mm W:1550mm H:1346mm
  • Estimated Lead time:7 - 10 working days

    Home Delivery

    UK mainland delivery from £245.00 ex VAT

    check delivery cost

    updown
    from £5,320.00 ex VAT
    (£6,384.00 inc VAT)
    Product Description

    1125 Litre 3000 Psi Pressure washer Highway Bowser with Rainmaker Combo


    Industrial Water bowser for the transport and storage of water. Site bowsers are fitted with a welded 40mm ring eye tow hitch as standard (a 50mm ball is optional).

    • Chassis - Constructed from 80 X 80 R.S.A fully welded with a 'T' frame drawbar, all fully hot dipped galvanised. 5mm sheet front mounting plate.
    • Axle/Suspension -Avonride rubber torsion bean axlel fitted with 200 x 50 auto reverse brakes. 4 stud 5 1/2" pcd hubs
    • Coupling - Knott-Avonride auto reverse coupling fitted with 40mm eye or 50mm ball, break away cable and parking brake lever
    • Ancillary Equipment - Moulded mudguards, front telescopic jockey wheel, side reflectors, front reflectors, rear lighting board comes with 13 pin plug and 7 pin adapter.


    Tank
    Polyethylene moulded tank, elliptical in section, baffled and fitted with an 18" lockable outer hinged manlid cover, inner sealed vented manlid. Tanks secured to chassis with 2 stainless steel straps. 1 rear tap fitted, 2" bottom drain underneath rear of tank. 2 rear outlets

    Pump
    Yanman electric start L100 10HP diesel engine driving a 200 Bar (3000 psi), 15Lpm piston pump comes with hand lance and 7m of hose stowed on bracket. Fuel consumption approx 1.5L/Hr, running time approx 2.9 Hrs.

    Wheels and Tyres
    2 No. 175 1 13 8 ply commercial van tyres.

    Rainmaker
    Diverter valve to switch from lance to spray nozzle, three powerful jet nozzles powered by the pressure washer covering a wide range area, adjustable height. Height 1200mm extends to 2000mm, also adjustable nozzle for different angles. Application:- damping down roads while being towed at slow speed or stationary building demolition work.

    Finish
    Tank moulded in Yellow, blue, red or green polyethene. Chassis galvanised.

     

    Delivery

    Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

    Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK,G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

    Our lead times should only be used as a guide and are subject to change.

    Offloading

    Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

    We recommend installers and/or plant hire & materials for install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

    If you have any questions regarding your delivery please contact the Sales Team on 01643 703358.

    Returns Information

    Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to 4.6 & 4.7. **

    Please be aware that returning a tank can be complicated and expensive so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

    If you wish to return goods, please complete the form on this page to provide further information.

    Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

    Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

    Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

    Please click here to request a return

    Product Specification

    • Product Code: TE
    • Material: MDPE
    • Potable: Non Potable
    • Shape: Horizontal

    People who bought this also bought...

    1100 Litre Highway Water Bowsers1100 Litre Highway Water Bowsers
    1100 Litre Highway Water Bowsers
    from £2,425.00 ex VAT
    (£2,910.00 inc VAT)