Best Selling
2 Drum Spill Pallet
2 Drum Spill Pallet - BP2
Polyethylene drum and barrel bund spill pallet, designed for the safe and compliant storage of 205 litre drums.
UDL: 650Kg
240 litre sump
Designed for 2 x 205L drums
Corrosion free
EC and UK Compliant oil storage
Compatible with most liquids
Forklift pockets
Removable plastic grids
1900 Litre Horizontal Water Tank
1900 Litre Tanks Direct Horizontal Water Tank
1900 Litre (Approx 418 Gallons) water storage tank.
This quality Tank's Direct water tank is suitable for rainwater harvesting & water storage, as well as irrigation or fire suppression applications.
Supplied complete with:
2" Fill Point and Screw Cap
5" Inspection Point and Screw
Vent
1” BSP Bottom Outlet
Tank...
230 Litre Norway Garden Water butt
Norway 230 Ltre Water Butt
With a highly realistic, deeply grained and ultra matt finish modelled on real wooden shingles from Nordic spruce. The Norway offers a compact, space-saving form and small footprint. Suitable for use in even the smallest gardens, the Norway will stand flat against walls, fences, or garden sheds. The Norway features brass ¾' connection points for a screw in tap...
6' Spring Vented Lid with Gasket
6" Spring vented lid with gasket
Sewage Pumping Station, Twin Pumps, 2600 litre tank
Sewage Pumping Station Twin Rigged 2600 Litre
Twin Rigged - 2600- Package Sewage Pumping Station. A packaged pump station is used when gravity drainage on site cannot be achieved. The waste from the site flows into an underground storage chamber, where it is then pumped to the main sewer. Packaged pump stations can be used for both foul water (sewage) and surface water applications. Our packaged...
4' Male BSP Outlet
4' BSP Male outlet made from glass reinforced Nylon.Approx thread outside diameter measurement 113mm
100 Metre Connection Cable
Connection Cable (100 metre)
Connects the Sensor tape to the alarm panel.
4 Core - 0.2mm² Security Cable Polyvinyl Chloride PVC Sheath
The connection cable provides a vital link between the alarm system and the various sensors or detectors used to monitor environmental conditions. Whether used in industrial facilities, laboratories, healthcare settings, data centres, or commercial buildings,...
12 Gallon / 55 Litre Cold Water Loft Tank
Polytank 12 Gallon / 55 Ltr Cold Water Loft Tank (20-12-20)
All rectangular POLYTANK Cold Water Loft Tanks come complete with the PT kit inside the tank.
PT2 Package consists of:
Snap on Polylid
POLYTANK Byelaw 30 kit and fitting instructions
1/2" BS1212 Part 2 ball valve and 41/2" float
Ball valve backplate
22 mm compression tank connector
15 mm x 1/2" angled...
40 Gallon / 182 Litre Framed Cold Water Loft Tank
40 Gallon / 182 Litre Framed Cold Water Loft Tank DescriptionPolytank 40 Gallon / 182 Ltr Framed Cold Water Loft Tank (23-23-28)
All framed POLYTANK Cold Water Loft Tanks come complete with the PT kit inside the tank
Includes PT2/C Package consisting of:Snap On Polylid
1/2' BS1212 Part 2 Ballvalve
Ballvalve Backplate 4 1/2' Float
22mm Compression Tank Connector
Byelaw 30 kit & fitting instructions
15mm...
20 Gallon / 91 Litre Cold Water Loft Tank
Polytank 20 Gallon / 91 Litre Cold Water Loft Tank (24-15-24)
All rectangular POLYTANK Cold Water Loft Tanks come complete with the PT kit inside the tank.
PT2 Package consists of:
Snap on Polylid
POLYTANK Byelaw 30 kit and fitting instructions
1/2" BS1212 Part 2 ball valve and 41/2" float
Ball valve back plate
22mm compression tank connector
15mm x 1/2" angled...
Wall Feeder
JFC EQ11 Wall Feeder
The JFC Wall Feeder is extremely durable and finished with a smooth, seamless finish for ease of cleaning. Designed with innovate features to prevent feed spillage and waste.
Specification
3 mounting holes on the back for secure fitting against a wall or post.
Fitted with a drain-off plug (13mm) for easy cleaning.
Rim designed with a feed retention lip to minimise...
150mm Screw Cap Spanner Wrench
150 mm Screw Cap Spanner Wrench
Manual wrench for IBC screw caps. Used for tightening or removing a 150 mm IBC lid. Fits all 150 mm IBC lids.
Profiled from a single piece of S275 4 mm steel and complete with hanging holes and zinc phosphate painted.
Designed with simplicity in mind, this wrench enables you to effortlessly open and close your IBC screw caps with ease.
Its ergonomic design...
S-20000 Pond Pump
S-20000 Pond Pump
Best Pond Pumps - These S-Series Pond pumps can be used for pond aeration, water features and filter systems. They are capable of pumping solids up to 6mm. A high-quality aluminium and ceramic shaft ensure long life even in continuous duty.
Submersible or inline use
Vortex Impeller
Integral Thermal Cut-out
Connections:
Connector options: 1”, 1¼”,...
Aquamaxx 450 Litre Cold Water Tank, Single Pump Booster set
Aquamaxx 450 Litre Cold Water Tank with a Single Pump Booster set
The Aquamaxx has been specifically designed for smaller properties with low water pressure and flow where space is at a premium. Areas such as apartments, cottages and town houses would benefit the most from a compact system.
The electronic controller will automatically start and stop the pump when a drop in pressure is sensed,...
32 mm x 25 mtr MDPE Pipe
32 mm x 25 MTR MDPE Pipe
Manufactured from medium density polyethylene (MDPE), which is designed to stay firm against the surface stress it receives underground. It can withstand up to 12 bar pressure.
32mm Medium-density polyethylene, sold in a coil of 25 metres. Suitable for use below ground on cold water services.
Key Features
32mm Black MDPE pipe.
Length of 25 metres.
12 Bar...
IBC Single Bund Spill Containment With Dispensing Area
IBC Single Bund Spill Containment With Dispensing Area BB1D
BB1D 86kg Fully compliant polyethylene single bund IBC secondary containment solution with integral dispensing area for 1 x 1000 litre IBC.
Integral dispensing area
Suitable for 1 x 1000 Litre IBC
Corrosion resistant
Suitable for most IBC footprints
Fork pockets for moving empty units
Delivery
All our IBC Spill...
Water Leak Detection Sensor Probe
Water Leak Detection Sensor Probe
Sensor Probe: Adjustable height from the floor between 0 and 25mm. Protective cover helps stop accidental damage. Multiple sensors can be linked in series to cover large areas. The sensor probe would be used in situations where either only a single point is important (such as a bund) or where a sensor tape might get damaged by foot traffic or some other process. A...
Airline Regulating Valve 3/4'
Airline Regulating Valve 3/4''
3/4 inch airline valve for P18 to P25 unit's
Charles Austen Air Blower ET120A
Charles Austen Air Blower ET120A
The ETA series range of air pumps ensures that there is plenty of water movement in wastewater applications; this boosts oxygen levels in the water, allowing aerobic bacteria to decompose. When used in medical applications, the ETA series provides a high low at low pressure. Enviro ETA pumps come with a built in alarm which detects low pressure in the airline.
...
IBC Hardcover
IBC Hardcover
A nestable IBC spill pallet with a weathertight Hard cover.
Features
Double swing doors
3 point locking mechanism
Integrated 2 litre platform spill tray
Ample headspace for IBC mixers, funnels and pumps
Inspection window and platform apertures
Integrated venting panels
Roof designed for quick rainwater run-off to the rear
Flat packed
Compatible with SJ-510-001
...
400 Litre Heavy Duty Container on Legs with Lid
400 Litre Heavy Duty Container on Legs with lid
Water and garden containers. The water and garden container range defy all weather conditions and are resistant against changing temperatures from -30°C to +40°C, briefly up to +90°C. These thick-walled containers are robust, durable and light-resistant due to the use of pure UV-stabilised HDPE material. All versions are nestable for...
Paxton 10,000 Litre Underground Water Storage Tank
10000 ltr (2000 gallon) Underground Potable or Non Potable water tank Paxton CT2200JB
This tank can be installed above or below ground. Versatile storage tanks suitable for liquids. Manufactured in robust one-piece stress-free mouldings with smooth hygienic internal and external surfaces. Built-in lifting lugs for handling empty tanks. Suitable for potable water when fitted with byelaw 30 kit. Tank...
Pack (2) 1.2 Metre Evo Red and White Road Traffic Safety Barriers
Pack of two Evo Safety Barriers one Red, one White
Each barrier is 1200mm Long x 800mm High x 400mm Wide
Wind Speed Tested Road Barrier
Easily linked
Designed to create a solid wall leaving no gaps between each other when linked together.
Quantity per pallet is 12 barriers - Quantity per full load is 350 barriers
Check out our full range of traffic management:
Pedestrian Barrier Systems,...
1125 Litre Site Water Bowser
1125 Litre (250 Gallon) Site Water Bowser
Industrial water bowser for transporting and storing water. Site bowsers are fitted with a welded 40mm ring eye tow hitch as standard (a 50mm ball is optional). They have no suspension, brakes, lights or mudguards and are mainly for static operation or slow speed off highway use, they shouldn't be towed at speeds exceeding 10 MPH.
Chassis - Constructed...
Ballast Block
Ballast Block for Telescopic Height barriers
This Ballast Block is for water filling and is designed with a bolt down base to give added stability to the Goal post systems.
It is an all round non-conductive product, so when used with the extendable goal posts it provides extra safety and strength to the variations in height when necessary.The Ballast block is stackable for storage or transportation....
Double IBC Spill Pallet with Fourway Access
Double IBC Spill Pallet - BB2FW
Suitable for 2 x 1000ltr IBC this yellow polyethylene bund pallet has 4-way base fork pockets for easy access and a heavy duty load capacity.
2500Kg max load
1150 litre sump
Designed for 2 x 1000L IBC's or 8 x 205L Drums
Corrosion free
Compliant with all UK oil storage regulations
Compatible with most liquids
Fourway Forklift pockets
2 x Removable...
67L CAT5 Single Variable Speed Pump Booster Set & Tank, 75l/min @ 5.0bar
67L CAT5 Single Variable Speed Pump Booster Set & Tank, 75l/min @ 5.0bar
The CAT 5 booster set also know as 'Backflow prevention booster set' incorporates a 67 Litre polypropylene break tank complete with a raised ball valve chamber with an AB air gap to WRAS approved regulations. This free standing booster set, is ideal where space is limited, as it has a small footprint of just 650mm...
BG Motor Gearbox (Bauer)
BG Motor Gearbox (Bauer)
This Bauer BG40 Motor/Gearbox is used with the Klargester BG Biodisc units.
Supply: 230V/50Hz/1PH
Output power: 0.180 kW
Output torque: 280 Nm
Output speed: 6.1 rpm
Enclosure: IP65 Rated
BA-BB Biodisc Drive Assembly Kit 4 (Pre 2006 models)
BA-BB Biodisc Drive Assembly Kit 4 (Pre-2006 models)
This is for the Pre-2006 Models of the BA/BB Bio Disc. This is a full drive assembly replacement kit including the motor, capacitor, belt, both pulleys & locking element.
The BA-BB Bio Disc Drive Assembly Kit 4 includes :-
Kingspan BA/BB Biodisc Motor - 1015023
Long 1600mm Belt - 0012828
Top Pulley - 0013725
Bottom Pulley -...
Enduramaxx 15,000 Litre Water Tank, Non Potable
Enduramaxx 15000 Litre Non-Potable Water Tank
This 15000 ltr (3300 Gallon) Above groundwater tank is made from a Medium Density Polymer (MDPE). This NON-POTABLE tank comes with a 2-year guarantee. Lifting eyes to make unloading and moving the tank easier. This above ground water storage tank is ideal as a sprayer tank, rain water harvesting collector.
Has unique up stand area for installing...
2500 Litre Bunded Diesel Dispensing Tank
2500 Litre Bunded Diesel Dispensing Tank
Deso 2500 Litre (550 Gallon) bunded Diesel tank is supplied with a 4 m hose, filter, overfill prevention and clock gauge. 12V or 240V options available.
The Extremely tight footprint is achieved by using an external pre galvanised steel frame which supports both the inner and outer skins, reducing the need for extensive internal ribbing. Gripple hooks...
215 Litre Water Tank
215 Litre Water Tank
Our 215 Litre Water tanks are suitable for storage and transportation of potable water and a wide range of other liquids. Metal inserts in the base of the tank allow for it to be bolted it to a chassis. This 215 Litre water bowser storage tank is manufactured in natural translucent medium density polyethylene with a 3/4" BSP outlet and 6" vented lid.
Optional...
Enduramaxx 1000 Litre Static Tank
1000 Litre Enduramaxx Static Water Tank
This Enduramaxx 1000 Litre horizontal static plastic water storage tank is manufactured in black potable polythene, it comes with a 300mm screw lid and optional inlets and outlets. The tank is also available in 5 other colours, please see our drop down 'colour option'.
Ideal for static water storage.
If you need a horizontal tank for transport...
Clearwater 9,150 Litre Shallow Dig Cesspool
Clearwater 7,150 Litre Shallow Dig Cesspool
Cesspool tanks are used for domestic sewage disposal where connection to a mains sewer is not practical.
They are designed for storage only, with their contents being emptied at regular intervals by a waste tankers.
Features:
Reduced installation costs – less soil disposal and excavation costs
Manufactured from GRP and EN12566-1 approved
99.7%...
Charles Austen Air Blower ET200
Designed for use in sewage aeration applications, the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture.
Key Features
Green...
ET-80 CHARLES AUSTEN BLOWER SERVICE KIT
ET-80 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-80 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen recommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure it's the correct kit for your blower.
Spill Kit - Chemical (Grab Bag, 50 Litres)
Spill Kit - Chemical (Grab Bag, 50 Litres)
Our Chemical Spill Kit (50 Litres) is a totally portable and versatile spill kit for use anywhere, inside or outside the workplace, for containing and cleaning up hazardous chemicals.
Hang on wall with extinguishers for complete emergency station.
Carry in cars for initial first response or place outside in high risk areas such as storage and transfer.
Every...
500 Litre DosingTank
500 Litre Water - Dosing Tanks / Containers
Designed for use in chemical dosing, These dosing tanks have a number of features making them easy to use, long lasting and well suited to many water treatment and storage applications:
Features
- Seamless one piece moulding
- Strong and durable design
- Split level moulded top allows for the mounting of apparatus
- Tight fitting screw caps supplied...
3/4' Hose Joiners
3/4" Hose Joiners
3/4" Hose Joiners used in P018-25 BioTec
Materials: Blue Tefen Plastic
Hose Joiners are used to connect 2 hoses together to extend the reach of your water flow beyond a single hose length.
30 Gallon / 136 Litre Cold Water Loft Tank
30 Gallon / 136 Litre Cold Water Loft Tank Description
Polytank 30 Gallon / 136 Litre Cold Water Loft Tank (24-24-24)
All rectangular POLYTANK Cold Water Loft Tanks come complete with the PT kit inside the tank.
PT2 Package consists of:
Snap-on Polylid
POLYTANK Bye-law 30 kit and fitting instructions
1/2' BS1212 Part 2 ball valve and 41/2' float
Ball valve...
BF TOP PULLEY BIODISC
BF-TOP-PULLEY-BIODISC
The BF top pulley is a standard width top pulley suitable to fit the motor shaft on a Klargester BG BioDisc Sewage Treatment Systems.
The BF top pulley comes with a grub screw to lock into position
17T 5/8 Inch Duplex Pinion bored 25 mm F7
5 x 1000 Litre IBCs
1000 Litre IBC (Intermediate Bulk Container).
IBC (TOTE) containers made from strong, durable blow moulded HDPE high-density polyethylene. UN approved.
Frame:-
Galvanised mild steel
Large 'Ticket' identification plate above valve outlet, Large documentation plate on back (opposite side to valve) 4 way entry galvanised mild steel perimeter pallet
Dimensions 1200 x 1000...
800 Litre Rainwater Tank with Filter
800 Litre Rainwater Tank with Filter
Tank
This water butt wall tank is a rainwater tank designed to fit close onto the wall.
Supplied with metal safety bracket for extra security.
This bracket is mounted on the wall and prevents the tank from tilting.
The inlet is made through a down pipe filter.
You can easily connect 2 or more tanks together with a 3/4" Tank to Tank Set...
1125 Litre Highway Pressure Washer, 3000 psi
3000 psi Highway Pressure Washer
Chassis - Constructed from 80 X 80 R.S.A. fully welded with a 'T' frame drawbar, all fully hot dipped galvanised. 5mm sheet front mounting plate.
Axle/Suspension - Avonride rubber torsion beam axle fitted with 200 x 50 auto reverse brakes. 4 stud 5½" pcd hubs
Wheels and Tyres - 2 no. 175 x 13 x 8 ply tyres on 5?" pcd 4 stud rims.
Coupling...
Klargester PSTOR18E Range
The new Kingspan Klargester extended PSTOR Horizontal Pump Range, is engineered for reliable performance offering complete peace of mind.
The new range offers a simplified and economic alternative providing two new options including a 1.8m and 2.8m diameter tank size, with a range of capacities from 8000 - 79000 litres.
In the event of power supply failure, this packaged pumping station swiftly...
Klargester Washdown Separator - 4000 litre
Kingspan Klargester Washdown and Silt Units
Klargester Washdown and Silt units can be used in areas such as car wash and other cleaning facilities that discharge directly into a foul drain, which feeds to a municipal treatment facility.
These units can be used to serve vehicle wash down areas and car wash facilities, although it should be noted that the prime function of such separators is for...
12000 Litre Potable Water Tank
The Tanks Direct 12000 Litre KIWA Approved Potable Round Water Tank
Discover the TD12000P Potable Water Storage Tank - a robust and versatile solution that is full KUKreg4 with KIWA accreditation, it is designed to meet any water storage requirements. With an impressive 12,000 litres of capacity, this tank is specifically designed to cater for a variety of needs, whether for agricultural use, residential...
BA Rotor Assembly Complete
BA Rotor Assembly Complete
Full rotor pack for 1 x BA Biodisc
This product is made to order, lead time 2 to 3 weeks.

Login


















.png)
.png)























































