Apply for an Instant Trade Account
Best Selling
Grid
List
800 Litre Water Tank,
800 Litre Flat Baffled Water Tank
Our 800 Litre (175 gallon) Water tanks are suitable for storage and transportation of potable water and a wide range of other liquids. Capacity: 800 Litres. This baffled water tank is manufactured in natural translucent medium density polyethylene with a 1" BSP outlet and 8" lid. Baffles are designed to strengthen and support the structure of the tank...
12000 Litre Potable Water Tank
12,000 Litre potable water tank
This 12,000 LTR above groundwater tank is made from a Medium Density WRAS approved Polymer (MDPE).
Suitable for drinking water and has a 2" Male outlet
One piece, seamless, rotationally moulded tank
Robust and durable
4 Moulded lifting points
1SG water grade
10 year guarantee
Dimensions - 2450 dia x 3000 H (mm)
Lid: 455 mm
Made in Somerset...
Klargester Bypass Separator - NSBE030 - 16,670M² Drainage Area
Klargester NSBE030 Bypass Separator - 16,670M² Drainage Area
Bypass separators are used when it is considered an acceptable risk to not provide full treatment for very high flows, such as, where the risk of a large spillage and heavy rainfall occurring at the same time is small.
Typical applications include surface carparks, roadways and lightly contaminated commercial areas.
Product...
BF/BG LOCKING ELEMENT
BF Bottom Pulley Locking Element
This locking element can be used both on the BF and the BG sewage treatment systems. It is used to clamp the bottom pulley onto the main shaft.
190 Litre Twin Pump Grey Water Pump Station, 6m lift
Aqua Tank Pro 190T - Twin Pump - Grey Water, Surface and Ground Water Pump Station - 190 Litres
The Aqua Tank Pro package pump station is designed to collect groundwater via a perimeter channel or 110 mm pipe and/or clear opening to the top of the chamber. The Aqua Tank Pro comes with a twin pump arrangement, this gives peace of mind, knowing that you always have a back-up pump. For further peace...
Replacement Fast Fill Trough Float Valve 3/4'
The JFC Fast Flow Valve - Replacement
This replacement valve is manufactured from tough, impact resistant and durable plastic, complete with a brass arm which with its "pinch point" enables the user to adjust the arm and reduce the fill point of the trough. Capable of delivering a high flow rate (up to 34L per minute) to make sure all the JFC fast flow troughs have clean fresh water at...
BA-BB BioDisc Drive Assembly Kit 3 (Post 2006 models)
BA-BB BioDisc Drive Assembly Kit 3 (Post 2006 models)
This is for the Post 2006 Models of the BA/BB Bio Disc. This is a full drive assembly replacement kit including the motor, capacitor, belt, both pulleys & locking element.
The BA-BB Bio Disc Drive Assembly Kit 3 includes :-
Panasonic Motor-Gearbox - 0015500
Short 1120mm Belt - 0010787
Top Pulley - 0013725
Bottom Pulley - 0600082
Locking...
Paxton 400 Litre Rectangular Drinking Trough
Paxton 400 Litre (90 Gallon) AT18 Rectangular drinking trough.
Paxtons range of rectangular drinking troughs offer a wide range of sizes (75 to 1136 litres) and ball cock mechanisms (centre and end fill). This particular trough (AT18) has a central ballcock installation and a 410L capacity. They can be used indoors or outdoors.
Plastic troughs combat the problems associated with products constructed...
Kingspan Control Panel Stand
Kingspan Control Panel Stand
Mild steel, galvanised angle iron stand for our new treatment tank control panel
BF Motor/Gearbox (Bauer)
BF Motor/Gearbox (Bauer)
This Bauer Motor/Gearbox is used with the Klargester BF Biodisc units.
Bauer 2000 Series helical geared motor
Supply:
230V/50Hz/1PH
Output power
0.120 kW
Output torque
136 Nm
Output speed
8.3 rpm
Terminal box mounting
B3
Terminal box position
I/A
Terminal...
1125 Litre Highway Pressure Washer, 3000 psi
3000 psi Highway Pressure Washer
Chassis - Constructed from 80 X 80 R.S.A. fully welded with a 'T' frame drawbar, all fully hot dipped galvanised. 5mm sheet front mounting plate.
Axle/Suspension - Avonride rubber torsion beam axle fitted with 200 x 50 auto reverse brakes. 4 stud 5½" pcd hubs
Wheels and Tyres - 2 no. 175 x 13 x 8 ply tyres on 5?" pcd 4 stud rims.
Coupling...
.png)
3/4" BSP Brass Float Valve
3/4' BSP Brass Float Valve Description3/4" Brass Float Valve
Quality float valve ideal for smaller tank setups and mobile applications
3/4"BSPM inlet
6 bar rated pressure
60° max fluid temperature
Brass mechanism
Plastic float
Platformless Double IBC Spill Pallet
Platformless Double IBC Spill Pallet
SJ-545 Platformless Double IBC spill pallets. Polyethylene bund double IBC secondary containment solution for 2 x 1000 litre IBC's.
Suitable for 2 x 1000 Litre IBC's
Corrosion resistant
Suitable for most IBC footprints
Safety storage.
Made from PE - 100% recyclable.
Central supports always to be used when platforms in place.
Easy...
230 Litre Norway Garden Water butt
Norway 230 Ltre Water Butt
With a highly realistic, deeply grained and ultra matt finish modelled on real wooden shingles from Nordic spruce. The Norway offers a compact, space-saving form and small footprint. Suitable for use in even the smallest gardens, the Norway will stand flat against walls, fences, or garden sheds. The Norway features brass ¾' connection points for a screw in tap...
Clearwater 9,150 Litre Shallow Dig Septic Tank
Clearwater Shallow Dig 9150 Litre Septic tank
This 47 person Clearwater shallow dig septic tank is the perfect choice for when sewage treatment plants, which discharge cleaned effluent into the ground, are not suitable.
This tank will store the effluent of 47 people, perfect for off-mains domestic properties, holiday homes and static caravans.
Supplied with galvanised steel cover with black...
Polytank CL50 Lid Only
Polytank CL50 Lid Only
Lid to fit (POLYTANK C50 Only) 50 gallon circular loft tank.
Specifically engineered to enhance the performance and longevity of your water storage system, making it an essential addition to any residential or commercial application.
The Polytank CL50 lid is meticulously designed to seamlessly fit the Polytank C50 water storage tank, ensuring a secure and precise fit....
Blower Housing Base
BLOWER HOUSING BASE
Base for blower housing - this base is only suitable for the version of the blower housing which clips down. If you have a screw down base, you will need a new blower housing complete.
Dimensions are in the technical drawings.
200000 Litre Bladder Tank, Non Potable
200000 Litre Bladder Tank, Non Potable
Collapsible Pillow Tanks for Non-Potable Water. Flexible Bladders for storage of NON POTABLE Water. These collapsible pillow tanks are ideal for emergency use, fast deployment, marquees, transporting empty tanks to difficult locations. A range of flexible bladder tanks for Non-Potable water, Dilute Chemicals, Sludges and Effluents.
The collapsible tank for...
425 Litre Round Water Tank
425 Litre Round Water Tank
Our 425 ltr (93 gallon) Round above ground water tanks are suitable for potable water and many other liquids. 1`` BSP brass outlet and 300mm screw lid. This 425 Litre round water storage tank is manufactured in medium density polyethylene with a 1" BSP outlet and 12" vented lid. A high quality water storage tank. We also supply a large range of other sizes of...
500 Litre DosingTank
500 Litre Water - Dosing Tanks / Containers
Designed for use in chemical dosing, These dosing tanks have a number of features making them easy to use, long lasting and well suited to many water treatment and storage applications:
Features
- Seamless one piece moulding
- Strong and durable design
- Split level moulded top allows for the mounting of apparatus
- Tight fitting screw caps supplied...
GRP Kiosk - 750mm x 500mm x 1250mm - Single Door (0018040)
GRP Kiosk - Single Door
These Glass Reinforced Kiosks come complete with vents on both sides. Suitable to sewage treatment tanks, pumps, and electrical equipment.
Weatherproof black gasket neoprene and 12mm plywood mounting backboards are fitted as standard.
Doors are reinforced to provide a high level of security and are dustproof and weatherproof.
High Quality handmade products
Stainless...
BC BioDisc Bearing Kit
BC BioDisc Bearing Kit
Klargester BC BioDisc Bearing kit for the drive end.
The BC drive end bearing for BioDisc is a complete nylon bearing with a grey bush insert & is suitable for all the Klargester BC BioDisc Sewage Treatment Systems (30mm).
10,000 Litre Water tank
10000 Litre WRAS approved Water tank
Ecosures 10000 Litre WRAS above groundwater tank is the ultimate in high capacity, value-for-money potable water storage. It is manufactured from top quality WRAS approved MDPE which meets the requirements of BS 6920-1:2000 and will not contaminate the water stored. The polymer's latest UV stabilisation package and excellent impact strength means this tank...
6' Spring Vented Lid with Gasket
6" Spring vented lid with gasket
GRP Kiosk - 1210mm x 515mm x 1260mm - Double Door (0018427)
GRP Kiosk - Double Door
Glass Reinforced Kiosk complete with vents on both sides. Suitable to sewage treatment tanks, pumps, and electrical equipment.
Keyed lock and 2no dead bolts.
Dimensions: 1210mm (W) x 515mm (D) x 1260mm (H)
Colour: RAL 6003
IP: X5
Half Hour Fire Rated
Klargester Gamma 3,500 Litre Septic Tank - Single Stage
Klargester Gamma 3500 Litre Septic Tank - Single Stage
Kingspan Klargester has developed Gamma as a direct response to market needs, an affordable and reliable septic tank that is easy to install in a range of domestic applications. This Septic Tank is a suitable capacity for 10 people. Complete with Standard Inlet Invert: 1000mm and Standard Outlet Invert: 1050mm
The Klargester Gamma Septic...
Twin Filter
Twin filter rainwater filter for larger roof areas
The Twin Filter can be installed in a pilot shaft or in frost-protected regions directly on the wall. Normally, standard concrete shafts are used (? 1000 mm). The filter can be delivered to the site pre-installed in the shaft. Two-step cleaning system, therefore high level of filtering efficiency, independent of flow rate. Due to the steep inclination...
GRP Booster Enclosure PWH-1.2x1.2x1.2
GRP Booster Set Enclosure Size 4
Our GRP enclosures are suitable for the protection of a number of items of industrial equipment, including our own water storage tanks, pump sets, valves in fact there is a housing to suit virtually any industrial product.
Used by Gas, Water and Electricity providers and local authorities along with the Mechanical services industry and many others.
General...
Panasonic Keyway
Panasonic Keyway
Keyway for Panasonic Motor and top pulley (BA - BB BioDisc only)
ET-60 CHARLES AUSTEN BLOWER SERVICE KIT
ET-60 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-60 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen recommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure it's the correct kit for your blower.
1/2' Equilibrium Drop Arm Float Valve with float
1/2' Equilibrium Drop Arm Float Valve with float Description
Float Valve Equilibrium 1/2'c/w drop arm and float
Standard valve with the addition of a brass threaded drop arm to allow the valve to be fitted into a raised float valve housing. (AB or AA air gap)
Equilibrium Float Valve
A range of quality high flow rate Float Valves which are simple and robust and can...
3/4' Ball Cock and Float Valve
3/4' Ball Cock and Float Valve
3/4' (19mm) Ball cock & Float Valve is designed to control the water level in tanks or containers. This valve is commonly used in applications where precise control of water flow is required.
The ball cock and float valve assembly consist of a sturdy brass body with a 3/4" BSP threaded connection for easy installation. The brass construction ensures...
64mm Layflat Fire Hose Type 2 with fittings, Non
Layflat Fire Hose 64mm x 15mtr, Type 2 c/w fittings - Non Potable
Starflex Type 2 is a high quality coated hose widely used by many industries.
Manufactured with an all synthetic woven polyester jacket Starflex Type 2 fire hose combines a light physical weight with a tough, hard wearing durability. With a low-friction-loss synthetic rubber lining Starflex Type 2 is flexible and easy to handle.
Manufactured...
Jet Spray Short Pattern Nozzle, D05A-LA
D05A-LA Jet/Spray Short Pattern Nozzle
The DO5 Industrial range of fire nozzles are manufactured in Light Alloy providing a lightweight branch that remains durable and strong to withstand the demands of heavy industrial use. These fire nozzles will deliver jet and spray patterns simply by gripping the rubber bumper ring and rotating the barrel through JET and SPRAY to a wide angle WATER CURTAIN...
BG Motor Gearbox (Bauer)
BG Motor Gearbox (Bauer)
This Bauer BG40 Motor/Gearbox is used with the Klargester BG Biodisc units.
Supply: 230V/50Hz/1PH
Output power: 0.180 kW
Output torque: 280 Nm
Output speed: 6.1 rpm
Enclosure: IP65 Rated
10,000 Litre Water tank, Non-Potable
10000 Litre Ecosure Non-Potable Water tank
Ecosure's 10000 Litre water tank is the ultimate in high capacity, value-for-money potable water storage. It is manufactured from top quality MDPE with excellent impact strength and the latest UV stabilisation package, this UK designed and manufactured tank is produced according to rigorous ISO 9001:201 quality control standards. It is a heavy-duty...
205 Litre Drum Dolly with Handle
205 Litre Drum Dolly
This 4 wheel poly drum dolly is a safe and robust solution for moving 205 litre drums.
Includes a steel handle making it ideal for also moving smaller containers, boxes and batteries.
Please also see PDD for a no handle version
Wall Feeder
JFC EQ11 Wall Feeder
The JFC Wall Feeder is extremely durable and finished with a smooth, seamless finish for ease of cleaning. Designed with innovate features to prevent feed spillage and waste.
Specification
3 mounting holes on the back for secure fitting against a wall or post.
Fitted with a drain-off plug (13mm) for easy cleaning.
Rim designed with a feed retention lip to minimise...
2500 Litre Bunded Diesel Dispensing Tank
2500 Litre Bunded Diesel Dispensing Tank
Deso 2500 Litre (550 Gallon) bunded Diesel tank is supplied with a 4 m hose, filter, overfill prevention and clock gauge. 12V or 240V options available.
The Extremely tight footprint is achieved by using an external pre galvanised steel frame which supports both the inner and outer skins, reducing the need for extensive internal ribbing. Gripple hooks...
18 Gallon / 82 Litre Cold Water Loft Tank
18 Gallon / 82 Litre Cold Water Loft Tank DescriptionPolytank 18 Gallon / 82 Litre Cold Water Loft Tanks (24-18-19)
All rectangular POLYTANK Cold Water Loft Tanks come complete with the PT kit inside the tank.
PT2 Package consists of:
Snap on Polylid
POLYTANK Byelaw 30 kit and fitting instructions
1/2' BS1212 Part 2 ball valve and 41/2' float
Ball valve back plate
22mm compression tank connector
15mm...
Boiler Control Cylinder ThermoStat
Cylinder Thermo Control Stat
Lowara 1.25'' Single Pump Variable Speed Booster Set, 85 l/min @ 3.7 Bar
1 1/4'' Single Pump Booster Set - 85lpm @ 3.7Bar
Cold water pressure and flow boosting set available in a range for Domestic, commercial and industrial applications. Made up by a single, pressure boosting cold water pump, designed to increase the pressure of the water services within a building where existing feed tank or mains are not capable of supplying suitable system pressure. If the...
ET-100 CHARLES AUSTEN BLOWER SERVICE KIT
ET-100 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-100 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen recommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure it's the correct kit for your blower.
67L CAT5 Single Variable Speed Pump Booster Set & Tank, 75l/min @ 5.0bar
67L CAT5 Single Variable Speed Pump Booster Set & Tank, 75l/min @ 5.0bar
The CAT 5 booster set also know as 'Backflow prevention booster set' incorporates a 67 Litre polypropylene break tank complete with a raised ball valve chamber with an AB air gap to WRAS approved regulations. This free standing booster set, is ideal where space is limited, as it has a small footprint of just 650mm...
Sewage Pumping Station, Twin Pumps, 1600 litre tank
Sewage Pumping Station Twin Rigged 1600 Litre
Twin Rigged - 1600 - packaged sewage pumping station. A packaged pump station is used when gravity drainage on site cannot be achieved. The waste from the site flows into an underground storage chamber, where it is then pumped to the main sewer. Packaged pump stations can be used for both foul water (sewage) and surface water applications. Our packaged...
2 Drum Spill Pallet
2 Drum Spill Pallet - BP2
Polyethylene drum and barrel bund spill pallet, designed for the safe and compliant storage of 205 litre drums.
UDL: 650Kg
240 litre sump
Designed for 2 x 205L drums
Corrosion free
EC and UK Compliant oil storage
Compatible with most liquids
Forklift pockets
Removable plastic grids
FPZ SCL K04-MS Side Channel Blower
FPZ SCL K04MS P55/90-p150/70 - Large Blower Unit
These blowers are ideal for sewage treatment systems, and pond aeration. Oil-free, pulse-free air at a very low decibel between 58 - 80 dB(A). These blowers can be mounted in any position and are designed with a unique design that channels air into sound-absorbing foam to help minimise noise.
Aluminium alloy construction, High-efficiency impeller,...
2000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB)
2000 Litre Sectional Water Tank, Internally Flanged Base (IFB)
2000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.
Insulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting...