LVM130 12V Submersible & Inline Pump 18lpm and 9.7m Head


Product Ref: LVM130

Fast Delivery Non Returnable Product
  • Weight: 0.800kg
  • Dimensions: L:165mm W:38mm H:38mm
  • Estimated 3 - 5 working days

    Home Delivery

    UK mainland delivery from FREE ex VAT

    check delivery cost

    Downloadable Documents

    Product Description

    LVM130 12V Submersible & Inline Pump Wash Down Kit

    The LVM130  12V Submersible & Inline Pump was down kit-  is a nylon body and 24V pump for clean water, sea water and even diesel! It has a max flow rate of 18lpm with a maximum head height of 9.7m supplied complete with 4m (12ft) of lay-flat hose, nozzle and battery clips, Suitable for agricultural spraying, carboy and drum emptying and transfer.

    As well as being supplied with a robust, slim line with clip-on easily cleaned filter, these kits are capable of pumping hot or cold fresh water, seawater, diesel and anti-freeze. 


    • 9.7m max head
    • 18 Lpm max flow
    • 12 Volt DC / 4.5 AMP motor
    • 3m max immersion
    • Suitable for clear water up to 80 degrees C
    • 1/2" hose barb outlet with clip-on filter
    • 4m power cable

    Product Details

    • Product Code: DP
    • Delivery: Fast Delivery
    • Material: Polyethylene
    • Tank Use: Non Returnable Product


    Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

    Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

    Our lead times should only be used as a guide and are subject to change.


    Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

    We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.


    HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

    If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

    Returns Information

    Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

    Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

    All Items must be returned unused, refunds cannot be issued for used or previously installed items.

    Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

    If you wish to return goods, please complete the form on this page to provide further information.

    Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

    Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

    Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

    View Tanks Direct's return policy now.