Megaflo Eco 125 Litre Slimline Indirect Unvented Hot Water Cylinder


Product Ref: 7034088

Customer Offloading Free Delivery
  • Volume: 125ltr
  • Weight: 36.000kg
  • Dimensions: W:491mm H:1440mm
  • Estimated Lead Time: 3-5 Working Days

    Home Delivery

    UK mainland delivery from FREE ex VAT

    check delivery cost


    Whats the difference between Direct and Indirect C

    Direct is where the heat comes from an electric immersion heater whereas the Indirect heat source uses the heat from a boiler.

    Product Description

    Megaflo 125 Litre Slimline Eco Indirect Unvented Hot Water Cylinder 

    Megaflo Eco Slimline is a compact version of the Megaflo Eco, designed for homes where space for a hot water storage cylinder is limited and where standard size cylinders are unlikely to fit. By being taller and slimmer, the Megaflo Eco Slimline stores the same amount of hot water as an equivalent capacity cylinder and still provides exceptionally high levels of comfort and hot water performance. 

    Negating the need for an expansion vessel, the unit fits in the tightest of situations, allowing for fast, tidy and compact installations that can be fitted almost anywhere.

    Package includes:

    • Cylinder incorporating factory fitted immersion heater and thermal controls
    • factory fitted temperature and pressure relief valve `
    • Instructions (Inc benchmark commissioning checklist & service record) 
    • Cold water control pack `
    • Combination valve (Inc pressure reducing valve, pressure relief valve, check valve and isolating valve) 
    • Tundish
    • 2 port zone valves 
    • Wiring centre 
    • T&P relief valve insulation set
    • Drain valve

    Megaflo Eco Slimline Indirect Unvented Hot Water Cylinder Specification

    • Internal floating baffle expansion system
    • 60 mm of CFC / HCFC-free injected foam for the best possible heat retention and energy efficiency
    • High performance 'coil-in-coil' heat exchanger in indirect models for exceptionally fast recovery times
    • Unique 'L' shaped immersion heater maximises the volume of hot water available when heated electrically
    • Titanium electric heating elements on direct models for extra long-life


    Megaflo Eco 125 Litre Slimline Indirect Specifications

     Capacity (Litres)  125
     Height (mm)  1440
     Diameter - cylinder only (mm)


     Diameter - cylinder Inc. T&P valve (mm)  516
     Weight - Empty (kg)  36
     Weight - Full (kg)  162
     Internal Expansion with Floating Baffle  YES
     Insulation Thickness (mm)  50
     Immersion Heater rating (kW)  1 x 3
     Standing Heat Loss (kWh/24h)  1.38
     Standing heat Loss (kWh/year)  504
     Max Flow at 3 Bar (l/min)  70
     Max Flow at 1 bar (l/min)  40
     T&P relief valve (mm)  970



    All our Cylinders are for delivery by customer offload. This entails the customer to acquire the right manpower and/or machinery to help unload the tank/s from the delivery vehicle.

    If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.


    Product Details

    • Product Code: PFW
    • Customer Offloading: Customer Offloading
    • Delivery: Free Delivery


    Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

    Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

    Our lead times should only be used as a guide and are subject to change.


    Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

    We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.


    HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

    If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

    Returns Information

    Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

    Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

    All Items must be returned unused, refunds cannot be issued for used or previously installed items.

    Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

    If you wish to return goods, please complete the form on this page to provide further information.

    Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

    Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

    Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

    View Tanks Direct's return policy now.

    People who bought this also bought...