ET-100 CHARLES AUSTEN BLOWER SERVICE KIT
ET-100 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-100 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen recommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure it's the correct kit for your blower.
ET-60 CHARLES AUSTEN BLOWER SERVICE KIT
ET-60 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-60 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen recommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure it's the correct kit for your blower.
ET-80 CHARLES AUSTEN BLOWER SERVICE KIT
ET-80 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-80 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen recommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure it's the correct kit for your blower.
FPZ SCL 15DH .37kw BLOWER
SCL 15 DH .37kw BLOWER
These blowers are ideal for sewage treatment systems, pond aeration. Oil-free, pulse-free air at a very low decibel between 58 - 80 dB(A). These blowers can be mounted in any position and are designed with a unique design that channels air into sound absorbing foam to help minimise noise.
Aluminium alloy construction, High efficiency impeller, comes complete with air filter
Single...
JDK-Pressure Relief Valve (150-500)
JDK-Pressure Relief Valve (150-500)
This Secoh JDK Pressure Relief Valve can be used with all Secoh JDK Air blowers from 150 to 500. The valve will prolong the lifespan of your air blower and release any excess air to prevent the internal workings of the blower from being damaged.
Original Black Rubber 90 Degree Hose
2 x Spring Clip Retainers
Setting 0.25 bar
Weight 0.5
19 mm ID
21...
Klargester BA/BB Biodisc Motor Capacitor Kit
The Klargester External Motor Capacitor Kit
The Klargester sewage treatment system BA/BA-X/BB BioDisc external Motor Capacitor Kit is suitable for the Klargester BA/BB BioDisc sewage treatment systems. The Kit is to be used alongside the post October 2007 green control panel.
This has a capacitor housed inside, so if you purchase a new Panasonic Motor/gearbox, and you do not have a capacitor...
PIPE DIFFUSER 65mm x 400mm
PIPE DIFFUSER 65mm x 400mm
For Biosafe 1 and Delta 1 tanks
Thread size is 1 inch BSP
SECOH JDK 150 - 500 DIAPHRAGM KIT
DIAPHRAGM SET -JDK 150-500
The SE41 Diaphragm Kit is suitable for Secoh JDK 60–120 Blowers, including:
JDK-S-150
JDK-150C
JDK-S-200
JDK-250C
The kit contains:
2x JDK diaphragms, plus their plastic surrounding frame
Note that the below range requires 2no kits per blower
JDK-S-300
JDK-300C
JDK-S-400
JDK-400C
JDK-S-500
JDK-500C
Note, these...
SECOH JDK-S-150 Single Series Blower
JDK-S-150 Single Series Blower
The JDK models are a direct replacement of the EL series of blower. They feature up to 30% less energy consumption, as well as being more compact than the EL series.
This is a direct replacement for the Secoh Sangyo EL-150 and ET200.
TANK SERVICING
Why does my system need serviced?
It’s important that your sewage treatment plant or septic...
SECOH JDK-S-250 Single Series Blower (EL-250)
The JDK models are a direct replacement of the EL series of blower - these also feature up to 30% less energy consumption, as well as being more compact than the EL series.
Long life expectancy
All parts of the motor are combined into one single construction. The combination of a compact and light construction mixed with the uncomplicated mechanism guarantee a long and reliable period of operation.
High...
Solenoid Valve
Solenoid Valve
To be used with the solenoid timer on below link :-
Solenoid Timer - Tanks Direct (tanks-direct.co.uk)
Used in Bioficient and Delta units
8' Internal Tank Lid
8' Internal Tank Lid
Internal 8' Tank replacement lid - Plain - The lids are made from U.V. resistant Polypropylene.
This threaded 8" plain tank water tank lid simply threads into a 255 lid collar. Creating a watertight seal with an ergonomic handle for quick and easy opening and closing, securing your water tank from debris and external elements.
Durable and lightweight U.V...
8' Cap Vent and Seal
8" Cap, Vent
The lids are made from U.V. resistant Polypropylene.
8' Internal Vented Tank Lid, Ghibli
Internal 8'' Tank replacement lid - Vented Ghibli
Threaded lid with fixed labyrinth breather, 'GHIBLI'. Made to current anti-pollution standards, the lid is equipped with a double breather valve to empty the tank quickly with the lid closed, even with a high-delivery pump. The lids are made from U.V. resistant Polypropylene.
16' Internal Tank Lid, Plain with Neck Ring and Seal
Internal 16" Plain water tank lid + Neck Ring and Seal
The lids are made from U.V. resistant Polypropylene.
620mm Vented Screw Lid
620mm 24' Screw Tank Lid - Vented
The tank screw lids assembly feature a vented design, meaning it includes small openings or vents that allow for the exchange of air and pressure inside the tank. This venting helps prevent the build-up of pressure or vacuum, ensuring the tank operates efficiently and safely.
The 455 mm screw tank lid, vented, provides a reliable and efficient solution for...
Water level Gauge
Water Level Gauge
A universal water level gauge, indicating water height between 100cm and 250cm. Quality level gauge for rain water tanks. Intended for outdoor use on stationary open vented tanks. UV-resistant and pressure-tight meter head. Flange mounting and 1 1/2' BSP connection. Graduated in CM.
The Movements of the floater are transmitted by a high grade line to the measuring mechanism...
1 metre x 1' Tank to Tank Joining Kit
1 metre x 1' Tank to Tank Joining Kit
Tank to Tank joining kit is a convenient and reliable solution for connecting two tanks together. This kit includes all the necessary components to join two tanks and create a seamless connection for fluid transfer.
The kit consists of a 1-metre-long flexible hose with a 1" diameter, which acts as a conduit for fluid transfer between the two tanks....
1/2' BSP Outlet
Male to Female 1/2' Tank outlet
Approx thread outside diameter measurement 21mm
Manufactured from UV Stabilised, high quality glass fibre reinforced nylon
WRAS approved
Approved for use with Potable (drinkable) water meaning they are ideally suited to a broad range of rural and domestic applications
Heavy duty tapered threads give a strong reliable seal
Unique design minimises...
150mm Non Vented Top Screw Cap with TPE Seal
150mm Non-Vented Screw cap with TPE Seal
Replacement Plain Screw cap to fit the Schütz IBCs. Ensuring a tight and secure seal for your IBCs. Designed to provide a hassle-free replacement for damaged or worn-out caps, ensuring the integrity and safety of your valuable liquid contents.
Specifically designed to fit the Schütz IBCs, ensuring a seamless and precise fit. This guarantees a...
2'' BSP to 50mm MDPE compression fitting
50mm x 2' Female Threaded Compression Adaptor
Allows you to easily convert from BSP to Blue / Metric MDPE alkathene pipe
A versatile and reliable connector, which is designed for joining pipes or fittings with different diameters. Allows you to easily convert from BSP to Blue / Metric MDPE alkathene pipe.
The adaptor features a 50mm male end and a 2" female BSP threaded end. The male...
63 mm x 50 mtr MDPE Pipe
63 mm x 50 mtr MDPE Pipe
Manufactured from medium density polyethylene (MDPE), which is designed to stay firm against the surface stress it receives underground. It can withstand up to 12 bar pressure.
63 mm Medium-density polyethylene, sold in a coil of 50 metres. Suitable for use below ground on cold water services.
Key Features
63 mm Black MDPE pipe.
Length of 250 metres.
12...
Poly A30 Air gap
Polytank A30 Air Gap.
All Polytanks should be handled carefully at all times to ensure long trouble-free life. All Polytanks have been specially designed for strength, look and are very robust. but THEY CAN BE DAMAGED.
On Site Test: Always carefully test to AVOID embarrassment. With multi-handling of the Polytanks from manufacturer to merchant, to plumber, to site, to cupboard or loft it is inevitable...
Rubber Grommet
110mm Rubber grommet / seal.
2' BSP Female Tank Connector
2" BSP Female Tank Connector
A unique BSP tank connector which has both male and female threaded ends. The connector is suitable for a variety of BSP male and female connectors and adaptors which utilise a BSP thread.
They are easy to fit and very durable. Manufactured from UV stabilised high quality glass fiber reinforced nylon providing weather, fungai and bacterial resistance.
Supplied with...
HS2.4S 110v Submersible Site Drainage Pump
HS2,4S 110v Submersible Site Drainage Pump
The HS series are 50 mm (2”) and 80 mm (3”) submersible pumps with motor sizes in 400watt and 750watt. The models HS2.75S and HS3.75S offer increased head and flow capability over the HS2.4S. All models have a solid cast aluminium body, cast iron pump casing and an impact resistant PVC strainer base for durability during robust handling. The...
HS3.75 110v Submersible Site Drainage Pump 80mm
HS2.75 110v Submersible Site Drainage Pump
The HS series are 50 mm (2”) and 80 mm (3”) submersible pumps with motor sizes in 400watt and 750watt. The models HS2.75S (50 mm 2") and HS3.75S (80 mm 3") offer increased head and flow capability over the HS2.4S. All models have a solid cast aluminium body, cast iron pump casing and an impact resistant PVC strainer base for durability...
HS3.75 230v Submersible Site Drainage Pump
HS3.75 110v Submersible Site Drainage Pump
The HS series are 50 mm (2") and 80 mm (3") submersible pumps with motor sizes in 400watt and 750watt. The models HS2.75S and HS3.75S offer increased head and flow capability over the HS2.4S. All models have a solid cast aluminium body, cast iron pump casing and an impact resistant PVC strainer base for durability during robust handling. The urethane...
Lower 60 Submersible Puddle Pump 230V
Lower 60 Submersible Puddle Pump
The Lower 60 Submersible Puddle Pump is a stainless steel electric 230V pump for clean water, waste water or slightly dirty water. It has a max flow rate of 90lpm. Can drain down to 2mm.
Specification:
10m max head
175 Lpm max flow
230 Volt 0.45 kW 2.2 Amp motor
Manual stop/start
Drains to 2mm
AISI 304 body
Class F insulation, IP68
2mm free...
2 Drum Bunded Work Floor
Connectable Bunded Drum Spill Floor for 2 Drums - BF2
BF2 - Work floors for 2 drums. Safety storage - Size: L1260mm x W860mm x H150mm
A low profile 2-drum sump (130L) floor only 150mm high moulded from medium density polyethylene that can be used as a stand-alone unit or combined with others to create unlimited bunded areas. Units can be joined together with plastic connectors to inter-link...
2 Drum Lockable Bunded Pallet with Hard Cover
BP2HC - Lockable Bunded Pallet 2 drums with Hard Cover
Manufactured from medium density polyethylene, this spill pallet has a hard cover and roller shutter door fitted with a central lock and two handles for easy opening and closing. The sump complies with all the UK regulations relating to sump capacities and comes complete with an injection moulded removable plastic mesh deck.
Delivered fully...
Large Spill Drip tray
60L Spill Tray
As these trays are made from polyethylene these are fully recyclable at the end of their usable life.
They can be used with or without the interior platform.
Stackable for easy transportation and storage.
Non-slip platform surface.
Easy to clean.
60L sump capacity
NOTE PRODUCT IS BLACK/YELLOW
Single IBC Bund with dispensing drip tray
SJ-525-BK-YE IBC Tote Pallets
Single IBC Pallet with Integral Dispenser
Single IBC spill pallets.
Safety storage.
Made from PE - 100% recyclable.
Central supports always to be used when platforms in place.
Easy to maintain and clean.
Compatible with most forklifts and pallet trucks, use extensions when needed.
Remove IBC and empty spill pallet before moving.
Solid construction.
Ergonomic...
Single IBC Covered Spill Pallet Bund
Single IBC Covered Spill Pallet Bund
Polyethylene IBC bund spill pallet with cover, designed for the safe and compliant storage of 1000 Litre IBC's.
1 x 1000 Litre IBC's
Corrosion free
Compatible with most liquids
Delivery
All our IBC tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and/or machinery to help unload...
Spill drip tray 152L
Spill drip tray base only, 152 Litre - TT152
A large capacity spill tray designed for general use of for placing under plant or machinery to catch minor leaks and drips. Manufactured from 100% polyethylene, this spill tray has a tough, rigid construction and is fully stackable for easy transportation and storage.
Spill drip tray base only, 100 Litre
Spill drip tray base only, 100 Litre
A large capacity spill tray designed for general use of for placing under plant or machinery to catch minor leaks and drips. Manufactured from 100% polyethylene, this spill tray has a tough, rigid construction and is fully stackable for easy transportation and storage.
Spill drip tray base only, 8 Litre
Spill drip tray base only, 8 Litre
Ideal for general "housekeeping' matters such as the temporary storage of small containers such as paint pots, grease tins, batteries etc..
Manufactured from 100% polyethylene, this spill tray has a tough, rigid construction and is fully stackable for easy transportation and storage.
Spill Kit - Chemical (Grab Bag, 50 Litres)
Spill Kit - Chemical (Grab Bag, 50 Litres)
Our Chemical Spill Kit (50 Litres) is a totally portable and versatile spill kit for use anywhere, inside or outside the workplace, for containing and cleaning up hazardous chemicals.
Hang on wall with extinguishers for complete emergency station.
Carry in cars for initial first response or place outside in high risk areas such as storage and transfer.
Every...
2 1/2' Instantaneous Female x 2' BSP Male Adaptor
2 1/2" Instantaneous Female x 2" BSP Male-adaptor
The 2.5" Instantaneous Female to 2" BSP Male Adaptor is ideal for fire brigades, industrial and general users and is a female to male adaptor.
Features:
Instantaneous female adaptor
2.5"
Light Alloy
Ideal for fire brigades, industrial and general users
∅A 65
∅B 2" BSP Male
BS 336
2 1/2' Instantaneous Male x 1 1/2' BSP Female Adaptor
2 1/2" Instantaneous Male x 1 1/2" BSP Female-adaptor
The 2.5" Instantaneous Male to BS 336 1 1/2" BSP Adaptor is ideal for fire brigades, industrial and general users and is a male to female adaptor.
Features:
BSP adaptor
2.5"
Ideal for fire brigades, industrial and general users
Male to female adaptor
Available in Light Alloy and Gunmetal
2 1/2' Instantaneous Male x 2' BSP Female Adaptor
2 1/2" Instantaneous Male x 2" BSP Female-adaptor
The 2.5" Instantaneous Male to 2" BSP Female Adaptor is ideal for fire brigades, industrial and general users and is a female to male adaptor.
Features:
Instantaneous Male adaptor
2" BSP Female Adaptor
Light Alloy
Contractors Standpipe with Single Bib Tap Double Check Valve
Contractors Standpipe with Single Bib Tap Double Check Valve
Standpipes are available in three principal formats, Single Headed, Double Headed and Contractors.
This product contains a check valve (Part number 2000D) that has WRAS Approved certification 1910313 which is available under the dowloadable documents tab above.
Please note the approval is for the check valve part only and not...
Hydrant Valve Key and Bar
Hydrant Valve Key and Bar
This Light alloy key and bar set is sturdy and durable, and you can rely on it for quick access to water supplies. Used to operate underground hydrant valves.
The upright section is known as the key. The bar is slotted at one end to be used to prise open the hydrant cover and, cleverly, slides neatly into the main stem when not in use and allows leverage when turning...
2 Zone Leakstopper Water Leak Detection Panel
Leakstopper 2 Zone Water Leak Detection Panel
Water Leak Detection, sensor based, 2 zone alarm panel. The outputs and method of how it detects water are pretty much the same as with the single zone descriptions given above. The LeakStopper detects water leaks and instantly triggers an alarm to warn you. It is capable of monitoring 2 areas simultaneously. If more than one of these areas has a leak,...
4 Zone Leakstopper Water Leak Detection Panel
Leakstopper 4 Zone Water Leak Detection Panel
Water Leak Detection, sensor based, 4 zone alarm panel. The outputs and method of how it detects water are pretty much the same as with the single zone descriptions given above.
The LeakStopper detects water leaks and instantly triggers an alarm to warn you. It is capable of monitoring 2 areas simultaneously. If more than one of these areas has a leak,...
Water Leak Detection Beacon Sounder Alarm
Water Leak Detection Beacon Sounder Alarm
The Beacon/Sounder Alarm can be connected to any of our alarm panel or directly to a float switch. Should the master panel detect a leak or the float switch lift too high, the beacon will flash and the sounder sound. These panels simply plug straight into any of the alarm panels using a 4 core alarm cable. As soon as the master panel has an alarm triggered...
Water Meter WRAS 3/4' with 1:1 Pulse Reader
Water Meter WRAS 3/4"' with 1:1 Pulse Reader
The 3/4" WRAS Water Meter is for measuring the flow and volume of water with a temperature up to 30 ÂșC on a maximum working pressure up to 16 bar. It is suitable for installation in the horizontal pipelines with the counter directed upwards and in vertical pipelines with the counter directed sidewards. The water meters are equipped with a low eight-barrel...
Calpeda GQR 10-10 Submersible Drainage Pump (1 1/2' Vertical Port)
Calpeda GQR 10-10 Submersible Drainage Pump
The Calpeda GQR submersible drainage pump is a single-impeller submersible drainage pump with a vertical delivery port with an open impeller. It has a double mechanical shaft seal with interposed oil chamber to protect against dry-running. This drainage pump has a maximum head height of 10m with a maximum pumping rate of 300 l/min.
Applications
For...