PlumbEZ 40mm Multi-Orientation Self-Closing Basin Waste Trap

How does the self-closing trap work?

The internal membrane opens when water flows through and automatically closes when not in use, preventing odours from escaping.

Does this trap require a water seal?

No, the self-closing mechanism provides odour protection without relying on standing water.

Can the trap be installed horizontally?

Yes, the multi-orientation design allows vertical, horizontal, or angled installation

Is this suitable for infrequently used basins?

Yes, it is ideal for basins that are not used regularly, as it prevents smells caused by dried-out traps.

Is this suitable for commercial use?

It is suitable for domestic and light commercial applications

PlumbEZ 40mm Multi-Orientation Self-Closing Basin Waste Trap

The 40mm Multi-Orientation Self-Closing Basin Waste Trap is an innovative waste solution designed to provide effective odour control where a traditional water seal may be compromised.

Featuring a self-closing membrane, the trap allows wastewater to flow freely while automatically sealing shut when not in use, preventing foul smells and sewer gases from escaping.

Its multi-orientation design enables installation in horizontal, vertical, or angled positions, making it ideal for restricted or unconventional plumbing layouts.

Designed for flexible installation in tight or awkward spaces, it eliminates the need for a traditional water trap.

Applications

• Basin Waste Installations
• Bathrooms and Cloakrooms
• Compact or Space-Restricted Installations
• Renovation and Retrofit Projects
• Domestic and Light Commercial Washrooms

Features and Benefits

• Self-Closing Membrane - Prevents odours without relying on a water seal
• Multi-Orientation Design - Can be installed vertically, horizontally, or at an angle
• 40mm Waste Connection - Compatible with standard basin waste systems
• Ideal for Intermittent Use - Prevents smells where traps may dry out
• Compact Profile - Suitable for confined spaces
• Durable Construction - Designed for long-term, reliable performance

Installation Guide

1. Ensure the basin waste outlet and pipework are clean and free from debris.
2. Position the trap in the required orientation to suit the pipe layout.
3. Connect the trap to the basin waste outlet using the appropriate sealing washers.
4. Secure the 40mm outlet connection to the waste pipe.
5. Run water through the basin to confirm correct operation and check for leaks.

Installation should be carried out in accordance with local building and plumbing regulations

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.