Sewage Pumping Station Twin Rigged 4400 Litre Twin Rigged -800/1200/1700 -Package Sewage Pumping Station
A packaged pump station is used when gravity drainage on site cannot be achieved. The waste from the site flows into an underground storage chamber, where it is then pumped to the main sewer. Packaged pump stations can be used for both foul water (sewage) and surface water applications. Our packaged pump station systems are designed to have a 24 hour storage capacity and are manufactured to BSEN752-6 standards. The Twin Rigged 800/1200/1700 Pump Station is suitable for a domestic sewage pumping station for use in areas where gravity flow is not available. It can be used for various drainage applications, with the system also used for the transfer of sewage or waste water, all specially designed for easy installation. The Twin Rigged 800/1200/1700 is a compact sewage pump station suitable for small to large houses and also commercial applications. The Twin Rigged 800/1200/1700 is particularly suitable when water or sewage is collected lower than the main sewer or a septic tank system. All you need is supplied to you within the package, so you will just need to supply the pipework to and from the station, plus any fittings. A high water alarm is supplied as standard. The Pumping Station comes with a submersible pump with 50mm solid handling for peace of mind. Our range of pumping stations is of a superior design and quality, to meet with BSEN75.6 requirements.
Cast iron/stainless steel construction
50mm (2") solids handling capacity
Coolant filled motor
10 M cable
Max 6 M lift
Max flow 5 L/sec
Float switch as standard
Twin control panel, c/w auto change over and high level alarm
4 x 10M float controls
1 x float bracket
1 x 110mm/160mm inlet seal to allow inlet to be drilled on site.
40mm cable duct.
2" internal pipe work
2" non-return valve
2" quick release coupling
2" cable duct
Special audible/visual high level alarm control box available.
To use the shipping estimator please select the * Required Fields (if applicable) shown on product above, then enter the quantity required (below) to obtain a carriage estimate.
Please call us for delivery to postcodes in Wales, Scotland, Highlands and Islands.
|Material:||HDPE (High density polyethylene)|
|Tank Use:||Below Ground|
|Twin or Single :||Twin|
High Level Alarm: Included
Outlet Depth: 500mm from top of tank
minimum sump depth 500mm, that needs to be left in the bottom of the tanks before drilling the inlet