Kingspan Parts

Kingspan Parts

  • display as grid Grid
  • display as list List
Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
BA - BB BioDisc - Nylon WashersBA - BB BioDisc - Nylon Washers
BA - BB BioDisc - Nylon Washers
BA - BB BioDisc - Nylon Washers **PRICE IS FOR SINGLE WASHER** BA / BB BioDisc Nylon spacer washers used for the shaft. We recommend to order x 6no. In total.
£0.83 ex VAT
(£1.00 inc VAT)
BA-BB-Biodisc-Lid-Extension-Neck-300mm
BA-BB-Biodisc-Lid-Extension-Neck-300mm
   
£204.42 ex VAT
(£245.30 inc VAT)
BA-BB-Biodisc-Lid-Extension-Neck-550mm
BA-BB-Biodisc-Lid-Extension-Neck-550mm
BA-BB- Invert 550mm extension neck BA-BB- Invert 550mm extension neck - allows sewage treatment system to set at the correct level to achieve the recommended gradient for the external pipework Materials:Glass Reinforced Plastic (GRP)
£283.96 ex VAT
(£340.75 inc VAT)
BA-BC Biodisc Smart Alarm kit
BA-BC Biodisc Smart Alarm kit
BA-BC Biodisc Smart Alarm kit Suitable for lots of units that need to have a high level alarm - this is great for any Cesspool or Small Pump-chamber to advise when unit is full. Also, a small discharge pump or Air-blower can be wired into this panel. Kit Includes :- Control Panel Low Voltage Beacon High Level Float Switch Lose of Rotation
£441.29 ex VAT
(£529.55 inc VAT)
BA/BB 1/2 Nylon BearingBA/BB 1/2 Nylon Bearing
BA/BB 1/2 Nylon Bearing
BA/BB 1/2 Nylon Bearing This is a Klargester half bearing to fit the non-drive end of a Klargester BioDisc BA/BB Sewage Treatment System.
£16.95 ex VAT
(£20.34 inc VAT)
BA/BB Bearing KitBA/BB Bearing Kit
BA/BB Bearing Kit
Full BA-BB BioDisc Bearing Replacement Kit. Includes : 0600038 - 1/2 Nylon Drive End Bearing 0600079 - Whole Drive End Bearing 0600039 - Retaining Plate 0303328 - Bearring Retaining Plate 0303464 - Metal Backing Plate
£77.22 ex VAT
(£92.66 inc VAT)
BA/BB BioDisc Bottom Pulley
BA/BB BioDisc Bottom Pulley
BA/BB BioDisc Bottom Pulley Bottom pulley to suit the Klargester BA, BA-X and BB BioDisc Sewage Treatment Systems. Bottom Pulley suitable for the shaft of the Klargester BA/BB BioDisc Sewage Treatment Plant 80 Teeth 8mm Pitch 20mm Wide High Torque Drive Pulley Note, when changing these the locking element needs removed first. It is advised that the locking element is changed...
£54.65 ex VAT
(£65.58 inc VAT)
BA/BB Chain Conversion Kit
BA/BB Chain Conversion Kit
BA/BB Chain Conversion Kit This Kit is to convert a Belt Drive BA-BB unit to Chain Drive 0017026- x 1no Top Pinion 0013194 - x 1no Chain Wheel 0017306 - x 5ft Chain & 0017307 - x 1no Chain Link 0013170 - x 1no Locking Element
£136.45 ex VAT
(£163.74 inc VAT)
BA/BB Pulley Locking Element
BA/BB Pulley Locking Element
BA/BB Bottom Pulley Locking Element This device is the element that holds the bottom pulley onto the shaft.
£15.38 ex VAT
(£18.46 inc VAT)
BA COVER (Biodisc)BA COVER (Biodisc)
BA COVER (Biodisc)
BA COVER (Biodisc) Cover/Lid for Biodisc BA-BB-BAX comes complete with 2 x Locks. Materials:Glass Reinforced Plastic (GRP) with a cloloured Gel Coat Weather Exterior.
£261.45 ex VAT
(£313.74 inc VAT)
BB Biodisc Rotor PackBB Biodisc Rotor Pack
BB Biodisc Rotor Pack
BB Biodisc Rotor Pack Klargester BB Rotor Pack is a replacement sewage treatment assembly to suit the BB range of Biodisc.
£1,672.65 ex VAT
(£2,007.18 inc VAT)
BC BioDisc Bearing Kit
BC BioDisc Bearing Kit
BC BioDisc Bearing Kit Klargester BC BioDisc Bearing kit for the drive end. The BC drive end bearing for BioDisc is a complete nylon bearing with a grey bush insert & is suitable for all the Klargester BC BioDisc Sewage Treatment Systems (30mm).
£54.92 ex VAT
(£65.90 inc VAT)
BC BioDisc Whole Bearing (Drive End)
BC BioDisc Whole Bearing (Drive End)
BC BioDisc Whole Bearing (Drive End) Klargester BC BioDisc Whole Bearing for the drive end. A Klargester BC BioDisc nylon bearing for the Klargester BC BioDisc Sewage Treatment Systems (30mm) and comes with a grey insert.
£38.01 ex VAT
(£45.61 inc VAT)
BC Biodisc Belt, Pre 2006 Models Only (1800mm)
BC Biodisc Belt, Pre 2006 Models Only (1800mm)
BC Biodisc Belt (1800mm) Replacement heavy-duty drive belt to suit Klargester BC BioDiscs manufactured pre-2006. 140no Teeth 8mm Pitch 20mm Wide Standard Duty HTD Belt The motor on these Biodisc Units high up in the tank and offside from the rotor.
£41.95 ex VAT
(£50.34 inc VAT)
BC Bottom PulleyBC Bottom Pulley
BC Bottom Pulley
BC Bottom Pulley The Klargester BC bottom pulley fits onto the shaft of all BC Biodisc sewage treatment systems. 30mm wide 8mm pitch 65mm Plain bored 80 Teeth Torerance H9 Note, when changing these the locking element needs removed first. It is advised that the locking element is changed when changing the bottom pulley
£73.86 ex VAT
(£88.63 inc VAT)
BC Pulley Locking Element
BC Pulley Locking Element
BC Pulley Locking Element This locking element can be used both on the BC sewage treatment systems. It is used to clamp the bottom pulley onto the main shaft.
£20.72 ex VAT
(£24.86 inc VAT)
BD/BE BEARING BUSH HALF x 2noBD/BE BEARING BUSH HALF x 2no
BD/BE BEARING BUSH HALF x 2no
BD/BE Bearing Bush Half x 2no This is a bearing bush half for a 40mm Diameter shaft. Suitable for Klargester BD/BE Biodisc. We recommend this is ordered with part 0002820 Comes as a pair of 2no
£25.67 ex VAT
(£30.80 inc VAT)
BD/BE Bearing HousingBD/BE Bearing Housing
BD/BE Bearing Housing
BD/BE Bearing Housing The BD/BE Half Bearing is suitable for 40mm diameter shafts in all Klargester BD/BE BioDisc Sewage Treatment Systems. This listing is for one single half bearing (Each Biodisc contains 2)
£36.74 ex VAT
(£44.09 inc VAT)
BD/BE Bottom Pulley for BiodiscBD/BE Bottom Pulley for Biodisc
BD/BE Bottom Pulley for Biodisc
BD BioDisc Bottom Pulley The BD BioDisc Bottom Pulley fits the main media shaft on all Klargester BD BioDisc Sewage Treatment Systems. A BD BioDisc Locking Element is also available separately, to lock the sprocket onto the shaft.
£129.33 ex VAT
(£155.20 inc VAT)
BD/BE Locking Element for Biodisc
BD/BE Locking Element for Biodisc
BD/BE Locking Element for Biodisc The BD/BE Locking Element for Biodisc is suitable for all Klargester BD/BE BioDisc Sewage Treatment Systems. The locking element fits into the centre of the pulley and makes sure it is secured to the BioDisc shaft. RCK40-40x65 SHAFT CLAMPING ELEMENT
£22.35 ex VAT
(£26.82 inc VAT)
BD/BE Top Pulley for BiodiscBD/BE Top Pulley for Biodisc
BD/BE Top Pulley for Biodisc
Top Pulley for BD/BE BioDisc Sewage Treatment Plant Top Pulley suitable for the motor shaft of the Klargester BD/BE BioDisc Sewage Treatment Plant 17 Teeth 5/8" Pitch F7 Tolerance 20mm Wide High Torque Drive Pulley Bored 20mm Grubscrew Supplied British Standard Keyway
£27.62 ex VAT
(£33.14 inc VAT)
BD/BE/BF Duplex Drive Chain - 102 pitches
BD/BE/BF Duplex Drive Chain - 102 pitches
BD/BE/BF Duplex Drive Chain - 102 pitches The BD/BF 5/8" duplex drive chain is suitable for all Klargester BD/BE/BF BioDiscs (2m length)
£92.06 ex VAT
(£110.47 inc VAT)
BF Bottom Pulley for BiodiscBF Bottom Pulley for Biodisc
BF Bottom Pulley for Biodisc
BF Bottom Pulley for Biodisc The BF BioDisc Bottom Pulley fits the main media shaft on all Klargester BF BioDisc Sewage Treatment Systems. A BF BioDisc Locking Element is also available separately, to lock the sprocket onto the shaft.
£131.20 ex VAT
(£157.44 inc VAT)
BF/BG LOCKING ELEMENTBF/BG LOCKING ELEMENT
BF/BG LOCKING ELEMENT
BF Bottom Pulley Locking Element This locking element can be used both on the BF and the BG sewage treatment systems. It is used to clamp the bottom pulley onto the main shaft.
£27.36 ex VAT
(£32.83 inc VAT)
BF TOP PULLEY BIODISC
BF TOP PULLEY BIODISC
BF-TOP-PULLEY-BIODISC The BF top pulley is a standard width top pulley suitable to fit the motor shaft on a Klargester BG BioDisc Sewage Treatment Systems. The BF top pulley comes with a grub screw to lock into position 17T 5/8 Inch Duplex Pinion bored 25 mm F7
£31.24 ex VAT
(£37.49 inc VAT)
BF/BG Drive End Bearing (45mm)BF/BG Drive End Bearing (45mm)
BF/BG Drive End Bearing (45mm)
BF/BG Drive End Bearing (45mm) The BF/BG Drive End Bearing (45mm) is suitable for all BF/BG Klargester BioDisc sewage treatment plants. Price includes seals, housing, locking ring and bearing. See images 3 & 4 for technical data on the bearing.
£296.67 ex VAT
(£356.00 inc VAT)
BF/BG Non Drive End BearingBF/BG Non Drive End Bearing
BF/BG Non Drive End Bearing
BF/BG Non Drive End Bearing The BF/BG Non Drive End Bearing (45mm) is suitable for all BF/BG Klargester BioDisc sewage treatment plants. Price includes seals, housing, locking ring and bearing. See images 3 & 4 for technical data on the bearing.
£296.67 ex VAT
(£356.00 inc VAT)
BG Biodisc Duplex Chain - 2 Metres
BG Biodisc Duplex Chain - 2 Metres
BG Biodisc Duplex Chain - 2 Metres The BG 3/4" duplex drive chain is suitable for all Klargester BG BioDiscs (2m length)
£98.72 ex VAT
(£118.46 inc VAT)
BG-Bottom-PulleyBG-Bottom-Pulley
BG-Bottom-Pulley
BG-Bottom-Pulley This is the bottom pulley required for Klargester BG sewage treatment systems, connecting to the main shaft. This requires a BG Pulley locking element
£239.35 ex VAT
(£287.22 inc VAT)
BG-TOP PULLEY-BIO DISC
BG-TOP PULLEY-BIO DISC
BG Top Pulley Bio Disc The BG top pulley is a standard width top pulley suitable to fit the motor shaft on a Klargester BG BioDisc Sewage Treatment Systems. The BG top pulley comes with a grub screw to lock into position 19T 3/4 INCH DUPLEX PINION BORED 30mmF7
£74.50 ex VAT
(£89.40 inc VAT)
Biodisc Grab Handle
Biodisc Grab Handle
BioDisc Grab Handle Black plastic Klargester Biodisc Handle to suit cover
£7.59 ex VAT
(£9.11 inc VAT)
Biodisc HingeBiodisc Hinge
Biodisc Hinge
Biodisc Hinge Black hinge with 4no 6mm countersunk holes to suit our Kingspan / Klargester Biodisc Sewage treatment plants Width 50mm Height 75mm Depth 4mm
£10.13 ex VAT
(£12.16 inc VAT)
BIOFICIENT-MEDIA-FILTERBIOFICIENT-MEDIA-FILTER
BIOFICIENT-MEDIA-FILTER
BIOFICIENT FILTER MEDIA Wastewater is treated in relatively small aeration tank partially filled with these moving bed media aerated filters. ("Hair Curlers"), providing a surface where a biofilm can grow. Oxygen is introduced via bubble diffused air also moving around the media. The media design gives a high surface area which promotes the growth of bacteria and other organisms (biomass)...
from £110.01 ex VAT
(£132.01 inc VAT)
Biosafe KeyBiosafe Key
Biosafe Key
Biosafe Key Description Keys used for Biosafe Tanks
£7.34 ex VAT
(£8.81 inc VAT)
Biotec P6-P12 500mm Extension
Biotec P6-P12 500mm Extension
Biotec P6-P12 500mm Extension Biotec P6-P12 Sewage treatment extension neck 495mm deep 1875mm diameter 50-50 Spray50% Filled Laminate Thickness: 7mm Weight: 33.17 35Kg
£320.65 ex VAT
(£384.78 inc VAT)
Black Strapping 12mm (per metre)Black Strapping 12mm (per metre)
Black Strapping 12mm (per metre)
Sold per metre lengths
£0.58 ex VAT
(£0.70 inc VAT)
Aeration Blower Housing Clips
Aeration Blower Housing Clips
BLOWER HOUSING CATCH/CLIP If you need a full set of clips, order x4 clips. These clips match the blower housing on the below link : - Kingspan Parts Blower Housing (Complete) - Tanks Direct (tanks-direct.co.uk)
£0.57 ex VAT
(£0.68 inc VAT)
Blower Box Cover
Blower Box Cover
Blower Box Cover Suitable for P006 - P025 BioTec units.

4

£22.04 ex VAT
(£26.45 inc VAT)
Blower Housing (Complete)Blower Housing (Complete)
Blower Housing (Complete)
Plastic Blower Housing - Complete Unit. Suitable for P006 - P025 BioTec units. Contains : - x1 0701007 - Blower Housing Lid x1 0701008 - Blower Housing Base x4 0701009 - Blower Housing Clips. Please note that if you have the old style of blower housing which needs screwed down, you will need to replace it with the new housing unit.

5

£43.50 ex VAT
(£52.20 inc VAT)
Blower Housing BaseBlower Housing Base
Blower Housing Base
BLOWER HOUSING BASE Base for blower housing - this base is only suitable for the version of the blower housing which clips down. If you have a screw down base, you will need a new blower housing complete. Dimensions are in the technical drawings.
£35.21 ex VAT
(£42.25 inc VAT)
Boiler Control Cylinder ThermoStatBoiler Control Cylinder ThermoStat
Boiler Control Cylinder ThermoStat
Cylinder Thermo Control Stat
£16.38 ex VAT
(£19.66 inc VAT)
BOTTOM OUTLET KIT
BOTTOM OUTLET KIT
BOTTOM OUTLET KIT (Oil Tank Fitting Kit) This kit includes practically everything you need to connect your heating oil tank to the supply pipe. INCLUDES THE FOLLOWING: Isolation ball valve 52 micron disposable nylon filter element 10mm copper compression fitting outlet 1" male BSPT tank fitting adaptor Roll of PTFE tape
£23.09 ex VAT
(£27.71 inc VAT)
C1337 Mann Filter
C1337 Mann Filter
C1337 Mann Filter C1337 Filter, for filtering destructive particles such as dust, pollen, sand, soot and even drops of water out of the intake air. Height: 125mm OD/Width Max: 128mm OD/Width Min: 128mm ID/Depth Max: 64mm ID/Depth Min: 64mm
£41.34 ex VAT
(£49.61 inc VAT)
Capacitor for Bauer BG10Z Motor
Capacitor for Bauer BG10Z Motor
Capacitor for Bauer BG10Z Motor 8SL Microfarad Motor Run Capacitor used on the BG10Z Bauer Motor Gearbox. This motor is used on BC, BD & BE BioDisc sewage treatment systems
£62.56 ex VAT
(£75.07 inc VAT)
Capacitor-10sl-bf-motor-gearbox
Capacitor-10sl-bf-motor-gearbox
Capacitor-10sl-bf-motor-gearbox 10SL Microfarad Motor Run Capacitor used on the Bauer 2000 Series helical geared motor (BF Motor.Gearbox) This Bauer Motor/Gearbox is used with the Klargester BF Biodisc sewage treatment systems.
£76.27 ex VAT
(£91.52 inc VAT)
CIM-TEK HYDROSORB 70062 FILTER 10 MICRON WATER BLOCK
CIM-TEK HYDROSORB 70062 FILTER 10 MICRON WATER BLOCK
CIM-TEK HYDROSORB 70062 FILTER 10 MICRON WATER BLOCK Cim-Tek Filtration, the world leader in fuel filter technology. They offer the ideal solution to ULSD Diesel filtration with the patented HydroSorb range of filters for particles and water removal. HydroSorb has a high particle and water holding capacity to ensure cleaner fuel Filter part number - CT70062 10 Micron with water block 1''...
£37.79 ex VAT
(£45.35 inc VAT)
CLP6 SPANNER KEYCLP6 SPANNER KEY
CLP6 SPANNER KEY
CLP6 Spanner Key To be used on the Bioficient Units
£5.53 ex VAT
(£6.64 inc VAT)
Conder Blower HousingConder Blower Housing
Conder Blower Housing
Conder Blower Housing This Conder external blower housing unit consists of: Blower box housing with lid, Cowl vent, Hose of 10m Jubilee clips x 2 This air blower housing unit must not be located near vegetation and to always allow ventilation to flow through the vents. The unit must not be stored in direct sunlight, a shady place will extend the life of your blower. The blower...
£273.60 ex VAT
(£328.32 inc VAT)
Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |