Kingspan Parts

Kingspan Parts

  • display as grid Grid
  • display as list List
Page: 1 | 2 | 3 | 4 | 5 |

Multigo Mesh Filter and Manifold
£57.92 ex VAT
(£69.50 inc VAT)
SENSiT Smart Tank level MonitorSENSiT Smart Tank level Monitor
Free Delivery
SENSiT Smart Tank level Monitor
SENSiT Smart Tank Contents Gauge The Kingspan SENSiT is a smart WiFi tank level monitor that enables you to monitor and control your water levels through the smartphone app. You can check your tanks level from anywhere and you will get notifications and alerts to your smart device when there are sudden drops in water, predicted run out, consumption monitoring and low level alerts. The SENSiT even...

5

£119.00 ex VAT
(£142.80 inc VAT)

18" - BLACK LID
18" - BLACK LID
18" - DESO OLD STYLE OIL TANK LID
£35.00 ex VAT
(£42.00 inc VAT)
BOTTOM OUTLET KIT
BOTTOM OUTLET KIT
BOTTOM OUTLET KIT (Oil Tank Fitting Kit) This kit includes practically everything you need to connect your heating oil tank to the supply pipe. INCLUDES THE FOLLOWING: Isolation ball valve 52 micron disposable nylon filter element 10mm copper compression fitting outlet 1" male BSPT tank fitting adaptor Roll of PTFE tape
£21.35 ex VAT
(£25.62 inc VAT)

TITAN OIL TANK 6" INSPECTION CAP
TITAN OIL TANK 6" INSPECTION CAP
Replacement cap for TITAN oil tanks only. Fits onto the tank inspection point/inlet (new style).
£25.00 ex VAT
(£30.00 inc VAT)
ATLAS 6" OIL TANK LIDATLAS 6" OIL TANK LID
ATLAS 6" OIL TANK LID
Replacement 6" (approx. dimension) lid (including steel pin and R clip) for a ATLAS oil tank only Fits onto the tank inspection point/inlet.
£22.00 ex VAT
(£26.40 inc VAT)

TITAN 4'' OIL TANK LIDTITAN 4'' OIL TANK LID
TITAN 4'' OIL TANK LID
Fits onto the 4" tank inspection point/inlet (old Style). Please Note: Only the lower rubber seal is included in this product.
£23.00 ex VAT
(£27.60 inc VAT)
TITAN 16' HINGED OIL TANK LID GREEN
TITAN 16' HINGED OIL TANK LID GREEN
Replacement 16'' (approx. dimension) oil tank lid for TITAN oil tanks only. Old style green arm hinged lid. Includes the gasket 0000325. This lid is for the older Titan bunded tanks (pre 2004/2006 approx.)
£67.00 ex VAT
(£80.40 inc VAT)

TITAN 16' OIL TANK LID RED
TITAN 16' OIL TANK LID RED
TITAN 16'' OIL TANK LID RED Replacement 16'' (approx. dimension) oil tank lid for TITAN oil tanks and some ATLAS tanks. Old style red arm hinged lid.
£67.00 ex VAT
(£80.40 inc VAT)
ATLAS 16' OIL TANK LID BLUEATLAS 16' OIL TANK LID BLUE
ATLAS 16' OIL TANK LID BLUE
ATLAS 16" OIL TANK LID BLUE Replacement lockable 16" lid (approx. dimension) for ATLAS bunded oil tanks only. 16" diameter manhole lid 'Quarter Turn' style Manhole Access Point. Supplied complete with: Lockable Plastic Manhole Lid Retention Ring Weatherproof Gasket
£67.00 ex VAT
(£80.40 inc VAT)

TITAN 19' OIL TANK LIDTITAN 19' OIL TANK LID
TITAN 19' OIL TANK LID
Replacement 19''(approx. dimension) oil tank cap lid for TITAN oil tanks only. This lid is for the newer Titan bunded tanks (after 2004/2006 approx.)
£56.65 ex VAT
(£67.98 inc VAT)
FUELMASTER & TRUCKMASTER LOCKFUELMASTER & TRUCKMASTER LOCK
FUELMASTER & TRUCKMASTER LOCK
Lock for all Titan FuelMaster and TruckMaster tanks. Will come with a set of keys as standard
£36.05 ex VAT
(£43.26 inc VAT)

DESO ATLAS KEYSDESO ATLAS KEYS
DESO ATLAS KEYS
Otherwise known as the ' 196 Key ' - this will suit the Deso/Atlas/Titan front stule lid locks. These will come in a pair.
£5.00 ex VAT
(£6.00 inc VAT)
1' TANK REDUCER
1' TANK REDUCER
25mm reducer
£4.98 ex VAT
(£5.98 inc VAT)

TITAN OIL TANK TOP OUTLET
TITAN OIL TANK TOP OUTLET
Top Outlet for titan double bunded Oil tanks
£34.44 ex VAT
(£41.33 inc VAT)
CIM-TEK HYDROSORB 70062 FILTER 10 MICRON WATER BLOCK
CIM-TEK HYDROSORB 70062 FILTER 10 MICRON WATER BLOCK
Cim-Tek Filtration, the world leader in fuel filter technology. They offer the ideal solution to ULSD Diesel filtration with the patented HydroSorb range of filters for particles and water removal. HydroSorb has a high particle and water holding capacity to ensure cleaner fuel Filter part number - CT70062 10 Micron with water block 1'' BSP Female thread Not suitable for gravity...
£47.66 ex VAT
(£57.19 inc VAT)

LID LOCKING STUD
LID LOCKING STUD
Button lock for 19'' Titan Oil Tank Lid and 6'' Titan Oil Tank Inspection Cap.
£2.11 ex VAT
(£2.53 inc VAT)
LOCKING LOOP & NUT
LOCKING LOOP & NUT
This locking hoop and nut can be used for all tanks within the Titan range.
£5.32 ex VAT
(£6.38 inc VAT)

2'' OFFSET FILLER CAP
2'' OFFSET FILLER CAP
2'' cap used on the offset fill-point. This is a standard part right across the Titan range. Cap can also be purchased as part of a complete offset fill-point (0019606)
£7.10 ex VAT
(£8.52 inc VAT)
OFFSET FILL ASSEMBLY COMPLETE
OFFSET FILL ASSEMBLY COMPLETE
2'' offset fill-point which can be used across the range of Titan oil tanks and any other type of plastic oil tank. This comes complete both gaskets, aluminium locking nut and the offset cap.
£39.11 ex VAT
(£46.93 inc VAT)

TITAN 1/2" BALL VALVETITAN 1/2" BALL VALVE
TITAN 1/2" BALL VALVE
This ball valve can be used across the entire Titan tank range. (1/2'' connection for tank pack)
£36.22 ex VAT
(£43.46 inc VAT)
19" RETROFIT GREEN SCREW CAP
19" RETROFIT GREEN SCREW CAP
19 inch retrofit lid includes sealant lid
£77.62 ex VAT
(£93.14 inc VAT)

7 1/4' OIL TANK LID
7 1/4' OIL TANK LID
8 Inch lid (c/w bar and pin) for old oil tanks
£25.12 ex VAT
(£30.14 inc VAT)
ATLAS 18' OIL TANK LID
ATLAS 18' OIL TANK LID
ATLAS 18'' OIL TANK LID Replacement lockable 18'' lid (approx. dimension) for ATLAS bunded oil tank only. New Style; operated by silver key Old Style; operated by triangle plastic key
£35.00 ex VAT
(£42.00 inc VAT)

TITAN 24' OIL TANK LIDTITAN 24' OIL TANK LID
TITAN 24' OIL TANK LID
Replacement 24'' (approx. dimension) oil tank lid for TITAN oil tanks only.
£78.33 ex VAT
(£94.00 inc VAT)
200CM Variable Speed Cased Pump200CM Variable Speed Cased Pump
New
200CM Variable Speed Cased Pump
200 CM Variable Speed Case Pump These pumps are low cost, compact and ideal for a wide range of low pressure dosing duties. The units are pre-wired for simplicity of installation and all use the standard 200 series mini-pump head. The 230V AC is supplied as standard. Features: Splash proof ABS injection moulded case Dual speed control and cycling timer function 230v AC Uses...
£39.50 ex VAT
(£47.40 inc VAT)

Rainwater-Pump-Mesh-Filter
Rainwater-Pump-Mesh-Filter
200 micron steel mesh filter to fit Divatronix Manifold (part code: 0019288), to fit Ebara Multigo Pump ( Product Code: 0012115)
£43.99 ex VAT
(£52.79 inc VAT)
Anti-Rotation Washer
Anti-Rotation Washer
Anti-rotation washer fitted to all Biodisc and Biotec lid locks
£1.65 ex VAT
(£1.98 inc VAT)

Klargester Bronze Service Plan
Klargester Bronze Service Plan
Klargester Bronze Service Plan
£212.08 ex VAT
(£254.50 inc VAT)
Panasonic Keyway
Panasonic Keyway
Keyway for Panasonic Motor and top pulley ( BA - BB BioDisc only)
£5.41 ex VAT
(£6.49 inc VAT)

Metal Top Retaining Plate for Front Bearing
Metal Top Retaining Plate for Front Bearing
Metal Backing Plate to hold the Klargester BA/BB Bearing Retaining Plate - Tanks Direct (tanks-direct.co.uk) in place. Used on BA, BB & BC BioDiscs.
£5.80 ex VAT
(£6.96 inc VAT)
B1-FA-Panasonic-Pinion-Wheel
B1-FA-Panasonic-Pinion-Wheel
Panasonic pinion wheel is suitable for Klargester B1 to BF treatment systems. Suited for panasonic gearboxes.
£185.95 ex VAT
(£223.14 inc VAT)

BA-BB-Biodisc-Lid-Extension-Neck-300mm
BA-BB-Biodisc-Lid-Extension-Neck-300mm
BA-BB- Invert 300mm extention neck  
£184.99 ex VAT
(£221.99 inc VAT)
BC Biodisk Belt (1800mm)
BC Biodisk Belt (1800mm)
1800mm Biodisk BC Belt
£51.85 ex VAT
(£62.22 inc VAT)

BC Bottom PulleyBC Bottom Pulley
BC Bottom Pulley
The Klargester BC bottom pulley fits onto the shaft of all BC Biodisk sewage treatment systems. 30mm wide
£66.99 ex VAT
(£80.39 inc VAT)
BC Pulley Locking Element
BC Pulley Locking Element
This locking element can be used both on the BC sewage treatment systems. It is used to clamp the bottom pulley onto the main shaft.
£18.99 ex VAT
(£22.79 inc VAT)

BF Motor/Gearbox (Bauer)
BF Motor/Gearbox (Bauer)
Biodisc BF Motor/Gearbox (Bauer)
£764.87 ex VAT
(£917.84 inc VAT)
BF-TOP-PULLEY-BIO DISK
BF-TOP-PULLEY-BIO DISK
The BF top pulley is a standard width top pulley suitable to fit the motor shaft on a Klargester BG BioDisc Sewage Treatment Systems. The BF top pulley comes with a grubscrew to lock into position 17T 5/8 INCH DUPLEX PINION BORED 25mmF7.
£27.99 ex VAT
(£33.59 inc VAT)

BF/BG Drive End Bearing (45mm)BF/BG Drive End Bearing (45mm)
BF/BG Drive End Bearing (45mm)
The BF/BG Drive End Bearing (45mm) is suitable for all BF/BG Klargester BioDisc sewage treatment plants. Price includes seals, housing, locking ring and bearing. See images 3 & 4 for technical data on the bearing.
£160.28 ex VAT
(£192.34 inc VAT)
BF/BG Non Drive End BearingBF/BG Non Drive End Bearing
BF/BG Non Drive End Bearing
The BF/BG Non Drive End Bearing (45mm) is suitable for all BF/BG Klargester BioDisc sewage treatment plants. Price includes seals, housing, locking ring and bearing. See images 3 & 4 for technical data on the bearing.
£160.28 ex VAT
(£192.34 inc VAT)

BG Bottom Pulley Locking ElementBG Bottom Pulley Locking Element
BG Bottom Pulley Locking Element
This locking element can be used both on the BG and the BF sewage treatment systems. It is used to clamp the bottom pulley onto the main shaft.
£24.99 ex VAT
(£29.99 inc VAT)
BG-Bottom-Pulley
BG-Bottom-Pulley
This is the bottom pulley required for Klargester BG sewage treatment systems, connecting to the main shaft. This requires a BG Pulley locking element
£249.99 ex VAT
(£299.99 inc VAT)

BG-TOP PULLEY-BIO DISC
BG-TOP PULLEY-BIO DISC
The BG top pulley is a standard width top pulley suitable to fit the motor shaft on a Klargester BG BioDisc Sewage Treatment Systems. The BG top pulley comes with a grubscrew to lock into position 19T 3/4 INCH DUPLEX PINION BORED 30mmF7
£66.99 ex VAT
(£80.39 inc VAT)
BH BJ Motor Gearbox Bauer
BH BJ Motor Gearbox Bauer
BH BJ Motor Gearbox (Bauer)  
£3,795.00 ex VAT
(£4,554.00 inc VAT)

Biodisc Cover Hinge
Biodisc Cover Hinge
EMKA Cover Hinge . sold single only
£3.10 ex VAT
(£3.72 inc VAT)
Biodisc-Cover-Hinge
Biodisc-Cover-Hinge
Black countersunk hinge to suit Biodisk Sewage treatment plants
£9.20 ex VAT
(£11.04 inc VAT)

Capacitor for Bauer BG10Z Motor
Capacitor for Bauer BG10Z Motor
8SL Microfarad Motor Run Capacitor used on the BG10Z Bauer Motor Gearbox. This motor is used on BC, BD & BE BioDisc's - motor product code is 0013114 .
£40.60 ex VAT
(£48.72 inc VAT)
Capacitor-10sl-bf-motor-gearbox
Capacitor-10sl-bf-motor-gearbox
10SL Microfarad Motor Run Capacitor used on the Bauer 2000 Series helical geared motor This Bauer Motor/Gearbox is used with the Klargester BF Biodisc units. ( Product Ref: 0012363 )
£64.99 ex VAT
(£77.99 inc VAT)
Page: 1 | 2 | 3 | 4 | 5 |