Kingspan Parts
Grid
List
Poly-Lok PL-625
Grease trap - Poly-Lok PL-625
The PL-625 filter is perfect for residential waste flows up to 80,000 GPD. It has an easy to install filter that fits into any 4 inch outlet tee. You can add multiple filters to achieve better filtration. It's recommended that the filters are cleaned every three years or when the tank is being pumped. The 1/32" filtration has been shown to reduce fats, oils...
PPFDS pipework
PPFDS Pipework
Hose to allow PPFDS system to connect
Per metre
Pressure Transducer
Pressure Transducer for our Rainwater Harvesting tanks.
Protector F1 Express 400ml
PROTECTOR F1 EXPRESS 400ML
Protector F1 is the market leading inhibitor which prevents corrosion and limescale formation in central heating systems. This high performance product offers superior protection by uniquely combining three inhibitors of organic particles, which bind to the metal within the heating system to protect from debris alongside anodic inhibitors which react with the system’s...
Proximity / Reed Switch
Proximity Switch (ONLY)
This proximity switch can be used on the Kingspan Klargester Biodisc Units. The switch is located beside the motor gearbox in the tank.
Used in conjunction with the Loss of Rotation magnet. This magnet is located on the rotor and with each rotation both the magnet and switch will contact. Once this cycle is broken the alarm will sound thus signalling the loss of rotation.
If...
Quarter Turn Lock
Quarter turn lock
RADIAL ARM BA/BB BIODISC
RADIAL ARM BA/BB BIODISC Description
This galvanised steel angle Radial Arm for ba-bb biodisc sewage treatment plant, this part holds the discs in place and stops them from turning individually.
Rainwater-Pump-Mesh-Filter
Rainwater-Pump-Mesh-Filter
200 micron steel mesh filters to fit Divatronix Manifold (part code: 0019288), to fit Ebara Multigo Pump (Product Code: 0012115)
FPZ SCL 15DH .37kw BLOWER
SCL 15 DH .37kw BLOWER
These blowers are ideal for sewage treatment systems, pond aeration. Oil-free, pulse-free air at a very low decibel between 58 - 80 dB(A). These blowers can be mounted in any position and are designed with a unique design that channels air into sound absorbing foam to help minimise noise.
Aluminium alloy construction, High efficiency impeller, comes complete with air filter
Single...
Secoh EL-60 - 150 Filter
Secoh EL-60 - 150 Filter
Filter used in the Secoh EL 60 - 150 blower units.
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
SECOH JDK 150 - 500 DIAPHRAGM KIT
DIAPHRAGM SET -JDK 150-500
The SE41 Diaphragm Kit is suitable for Secoh JDK 60–120 Blowers, including:
JDK-S-150
JDK-150C
JDK-S-200
JDK-250C
The kit contains:
2x JDK diaphragms, plus their plastic surrounding frame
Note that the below range requires 2no kits per blower
JDK-S-300
JDK-300C
JDK-S-400
JDK-400C
JDK-S-500
JDK-500C
Note, these...
SECOH JDK-S-100 Single Series Blower
SECOH JDK-S-100 Single Series Blower
The JDK models are a direct replacement of the EL series of blower - these also feature up to 30% less energy consumption, as well as being more compact than the EL series.
Long life expectancy
All parts of the motor are combined into one single construction. The combination of a compact and light construction mixed with the uncomplicated mechanism guarantee...
SECOH JDK-S-120 Single Series Blower
SECOH JDK-S-120 Single Series Blower
The JDK models are a direct replacement of the EL series of blower - these also feature up to 30% less energy consumption, as well as being more compact than the EL series.
Long life expectancy
All parts of the motor are combined into one single construction. The combination of a compact and light construction mixed with the uncomplicated mechanism guarantee...
SECOH JDK-S-150 Single Series Blower
JDK-S-150 Single Series Blower
The JDK models are a direct replacement of the EL series of blower. They feature up to 30% less energy consumption, as well as being more compact than the EL series.
This is a direct replacement for the Secoh Sangyo EL-150 and ET200.
TANK SERVICING
Why does my system need serviced?
It’s important that your sewage treatment plant or septic...
SECOH JDK-S-200 Single Series Blower (EL-200)
SECOH JDK-S-200 Single Series Blower (EL-200)
The JDK models are a direct replacement of the EL series of blower - these also feature up to 30% less energy consumption, as well as being more compact than the EL series.
Long life expectancy
All parts of the motor are combined into one single construction. The combination of a compact and light construction mixed with the uncomplicated mechanism...
SECOH JDK-S-250 Single Series Blower (EL-250)
The JDK models are a direct replacement of the EL series of blower - these also feature up to 30% less energy consumption, as well as being more compact than the EL series.
Long life expectancy
All parts of the motor are combined into one single construction. The combination of a compact and light construction mixed with the uncomplicated mechanism guarantee a long and reliable period of operation.
High...
Secoh JDK-S-60 - 120 Filter
Secoh JDK-S-60 - 120 Filter
Filter for the Secoh JDK-S 60 - 120 blower range.
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
SECOH JDK-S-60 Single Series Blower
SECOH JDK-S-60 SINGLE SERIES BLOWER
The JDK models are a direct replacement of the Secoh EL series of blower. They feature up to 30% less energy consumption, as well as being more compact than the EL series.
This model is to be used in the Biosafe/ CLP6 unit, located on the inside of the unit.
Long life expectancy
All parts of the motor are combined into one single construction. The...
SECOH JDK-S-80 Single Series Blower
SECOH JDK-S-80 SINGLE SERIES BLOWER
The JDK models are a direct replacement of the EL series of blower - these also feature up to 30% less energy consumption, as well as being more compact than the EL series.
Long life expectancy
All parts of the motor are combined into one single construction. The combination of a compact and light construction mixed with the uncomplicated mechanism...
Sensor Depth Probe 20m
Sensor Depth Probe 20m
Used for: Kingspan Water Envireau.
This is the 20-metre depth probe for a Kingspan Water Rainwater Harvesting System. This probe only works with the Rainwater Control & Display panels sold on this site :-
Klargester Rainwater Supply Control Panel - Tanks Direct (tanks-direct.co.uk)
Klargester Rainwater Display Panel - Tanks Direct (tanks-direct.co.uk)
...
Sensor Depth Probe 50m
Sensor Depth Probe 50M
Used for: Kingspan Water Envireau.
This is the 50-metre depth probe for a Kingspan Water Rainwater Harvesting System. This probe only works with the Sensor Display Panel and Sensor Control panels sold on this site.
Can take up to 10 working days to deliver (made to order)
Septic Tank Cover & Frame
Fully Galvanised
Single Pump Control Panel Single Phase
Kingspan / Klargester Single Phase Single Control Panel
This panel gives the customer security in knowing when something is wrong and that this 230 volt single control panel will trigger when there is a high water level and pump failure indicated with a red light on the front of the control panel.
This Control Panel is recommended to be housed within a waterproof enclosure /Kiosk. These are...
Smart Immersion Heater 3kw 14'
Smart immersion heaters use to 20% less electricity than standard immersion heaters by learning the hot water usage profile and automatically optimising the energy input into the cylinder.
Approved to EN 60335-2-73 and fitted with dual safety thermostat and reset cut-out switch
SPECIFICATION:
Use up to 20% less electricity
self-learning algorithms
Dual safety thermostat
3kW output
...
SMARTSERV PRO
Gain real-time access to vital information from your wastewater system to your phone or computer with SmartServ Pro. Such visibility will allow you to monitor the performance for your system anytime, anywhere, without having to travel to each installation to gather individual readings. For more information, please call 01643 703358
Solar Catchment Tank
Solar Catchment Vessel
Solar Fluid Catchment tank is a fit for purpose vessel, which allows for safe collection of the solar fluid discharge (Glycol) in a quick and tidy manner for reuse later.
SOLAR SENSOR
Solar Sensor
KEK0016 - PT 1000 replacement sensor for SC - KS range controllers - solar units only
Solar-cleaner-fluid-500ml
Solar Cleaner Fluid 500ML
Solar Cleaner is a concentrated universal cleaner specifically designed for solar thermal systems, by removing degraded solar heat transfer fluids, sludge and blockages. This product rapidly restores efficiency to existing solar thermal systems.
Fernox Solar Cleaner is compatible for use with all materials commonly used in solar thermal installations.
A concentrated...
Solenoid Valve
Solenoid Valve
To be used with the solenoid timer on below link :-
Solenoid Timer - Tanks Direct (tanks-direct.co.uk)
Used in Bioficient and Delta units
Solenoid Valve Direct & Overflow
SOLENOID VALVE DIRECT & OVERFLOW
This is a Solenoid valve used for a Kingpspan Envireau rainwater harvesting system. Sirai 3/4" Solenoid Valve. Normally OPEN Energise to CLOSE, including MPM CONNECTOR. For Multi-user systems.
Solenoid Valve Timer (Only)
Solenoid Valve Programmable Cycle Timer
Programmable Timer for use with most Solenoid valves , programmable On & Off to cycle over a period of set times, fully automatic and easy to install
This time is able to cycle between Off cycle: 0.5 to 10 seconds, 0.5 to 45 minutes, 0.5 to 60 minutes and 25 to 150 minute and On cycle: 0.5 to 10 seconds, 0.25 to 5 minutes, 0.5 to 10 minutes and 0.5...
BIODISC NYLON BEARING (RETROFIT)
BIODISC NYLON BEARING
Bearing to suit Klargester BioDisc FA, FB and FC Sewage Treatment Systems.
This bearing has a 25mm internal diameter and a closed off side (as pictured).
For a full set, you will need x2,
Stephan to Panasonic Conversion Kit
Stephan to Panasonic Conversion Kit
This is a conversion kit to suit a peripheral drive.
Includes:
1no Roller Kit
1no Pinion Wheel
1no New Drive Plate
4no Bolts
8no Washers
4no Nuts
1no Panasonic Motor Gearbox
1no galvanised steel mount
4no Bolts
1no capacitor
PPFDS Stud Coupling (6mm)
PPFDS Stud Coupling (6mm)
To allow connection of the PPFDS pipework into the Control Panel
Temperature & Pressure Relief Valve (7 bar)
Temperature & Pressure Relief Valve 1/2" (7 Bar)
THERMOWATT 3KW 14' INCOLOY IMMERSION HEATER
Thermowatt 3kW 14" Incoloy Immersion Heater Element
TIGERLOOP BIO DE-AERATOR - INTERNAL/EXTERNAL FITTING
TIGERLOOP BIO
The new and improved third generation automatic oil de-aerator.
The Tigerloop Bio pre-heats the oil to at least room temperature by absorbing the heat from the boiler room and friction heat from the oil pump.
The Tigerloop Bio is used in combination with a separate oil filter.
The benefits of Tigerloop are applicable anywhere you use a light oil burner. The Tigerloop Bio is...
TIGERLOOP COMBI 3 DE-AERATOR - EXTERNAL FITTING
Tigerloop Combi 3 De-Aerator - TCN110i
The Tigerloop Combi removes air from heating oil and is fitted on the outside wall of the property, between the tank and the pressure jet burner. This allows the tank to be installed lower than the burner. The Tiger Loop can draw fuel from up to 30m away with a 10mm fuel line. Similar to the basic TigerLoop Original, but with integrated disposable filter. Suitable...
TIGERLOOP ORIGINAL DE-AERATOR - EXTERNAL FITTING
Product Description
Tigerloop Original De-Aerator - TON110i
The Tiger Loop removes air from heating oil and is fitted on the outside wall of the property, between the tank and the pressure jet burner. This allows the tank to be installed lower than the burner. The Tiger Loop can draw fuel from up to 30m away with a 10mm fuel line. Suitable for oil and kerosene. 1/4" F BSP.
INCLUDED:
Tigerloop...
TITAN 1/2' BALL VALVE
This ball valve can be used across the entire Titan tank range. (1/2'' connection for tank pack)
TITAN 16' HINGED OIL TANK LID GREEN
Replacement 16'' (approx. dimension) oil tank lid for TITAN oil tanks only. Old style green arm hinged lid.
Includes the gasket 0000325.
This lid is for the older Titan bunded tanks (pre 2004/2006 approx.)
TITAN 16' OIL TANK LID RED
TITAN 16'' OIL TANK LID RED
Replacement 16'' (approx. dimension) oil tank lid for TITAN oil tanks and some ATLAS tanks. Old style red arm hinged lid.
TITAN 19' OIL TANK LID
Replacement 19''(approx. dimension) oil tank cap lid for TITAN oil tanks only.
This lid is for the newer Titan bunded tanks (after 2004/2006 approx.)
TITAN 24' OIL TANK LID
Replacement 24'' (approx. dimension) oil tank lid for TITAN oil tanks only.
TITAN 4'' OIL TANK LID
TITAN 4'' OIL TANK LID
Replacement 4'' (approx. dimension) screw cap for TITAN bunded oil tanks only. Fits onto the 4'' tank inspection point/inlet (old Style).
Please Note:
Only the lower rubber seal is included in this product.
TITAN OIL TANK 2'' VENT CAP
TITAN OIL TANK 2'' VENT CAP
Replacement 2'' vent cap for TITAN oil tanks only.
TITAN OIL TANK 6' INSPECTION CAP
TITAN OIL TANK 6' INSPECTION CAP
Replacement cap for TITAN oil tanks only.
Fits onto the tank inspection point/inlet (new style).
TITAN OIL TANK TOP OUTLET
Comes supplied with flexible suction pipe and float
Red valve lever
Oil supply connection for pipe
Return inlet connection (if required)
Connection Dia. 3/8” to take 6/8/10mm pipework