Klargester Forecourt Separator

Klargester Forecourt Separator

Klargester Forecourt Separator

Product Ref: FS010

Customer Offloading HIAB Available
  • Weight: 500.000kg
  • Dimensions: D:3963mm W:1913mm H:2510mm
  • Diameter: 2010mm
  • Home Delivery

    UK mainland delivery from FREE ex VAT

    check delivery cost

    from £2,706.00 ex VAT
    (£3,247.20 inc VAT)
    Product Description

    Klargester Forecourt Separator - 10,000 Litres

    The Klargester forecourt separator is designed for installation in petrol filling station forecourts and similar application. The function of the separator is to intercept hydrocarbon pollutants such as petroleum and oil and prevent their entry to the drainage system, thus protecting the environment against hydrocarbon contaminated surface water run-off and gross spillage

    Operation ensures that the flow cannot exit the unit without first passing through the coalescer assembly. In normal operation, the forecourt separator has sufficient capacity to provide storage for separated pollutants within the main chamber, but is also able to contact up to 7,600 Litres of pollutant arising from the spillage of a fuel delivery tanker compartment on the petrol forecourt. The separator has been designed to ensure that oil cannot exit the separator in the event of a major spillage, subsequently the separator should be emptied immediately.

    Forecourt Separator Features

    • Light and easy to install
    • Inclusive of silt storage volume
    • Fitted inlet/ outlet connectors
    • Vent points within necks
    • Extension access shafts for deep inverts
    • Maintenance from ground level
    • Oil storage volume.
    • Coalescer 
    • Automatic closure device
    • Oil alarm system available
    • CE - marked

    Forecourt Separator Specifications

     Class  Backfill Type  Total Capacity (L)  Drainage Area (m2)  Peak Flow Rate (l/s)  Length (mm)  Diameter (mm)  Access Shaft Diameter (mm)  Base Inlet Invert (mm)  Base to Outlet Invert (mm)  Std. Fall Across Unit (mm)  Min. Inlet Inlet (mm)  Standard Pipework Diameter (mm)  Empty Weight (kg)
     I / II  Concrete  10000  835  15  3915  2020  600  2180  2130  50  600  160 620
     I / II  Concrete  10000  1115  20  3915  2020  600  2180  2130  50  600  200  620




    • Garage Forecourts
    • Car Parks
    • workshops
    • Supermarket / Shopping Centres
    • Distribution Warehouses
    • Car Wash Bays
    • Scrap Yards
    • Car Garages
    • Fuel Storage Sites
    • Distribution / Haulage Centres
    • Waste Transfer Sites
    • Business, Commercial parks and Industrial Estates

    British European Standard EN 858-1 and the Environment Agency Pollution Prevention guideline PPG3 requires all separators are to be fitted with an oil level alarm system. It should be installed and calibrated by a suitably qualified technician so that it will respond to an alarm condition when the separator requires emptying.



    Our Forecourt Separators are delivered on a Flat bed Arctic lorry, however they require offloading by the customer. This entails the customer to acquire the right manpower and/or machinery to help unload the tank/s from the delivery vehicle.

    If you require assistance with offloading,  HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle) delivery is available at an additional cost. Please contact us if this is required for delivery.


    Service and Maintenance

    It is essential that you ensure your separator is properly serviced and maintained to remain compliant with EN 858-1 standard and prevent pollution due to blockages. Kingspan’s service and maintenance packages have been developed using their expert knowledge of their separators to help keep your separator operating at optimal efficiency, therefore remaining non-polluting and compliant. Visit Kingspan Service or contact the Kingspan Team on 0818 543 500 or for more information on the packages available.





    Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

    Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK,G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

    Our lead times should only be used as a guide and are subject to change.


    Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

    We recommend installers and/or plant hire & materials for install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

    If you have any questions regarding your delivery please contact the Sales Team on 01643 703358.

    Returns Information

    Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to 4.6 & 4.7. **

    Please be aware that returning a tank can be complicated and expensive so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

    If you wish to return goods, please complete the form on this page to provide further information.

    Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

    Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

    Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

    Please click here to request a return

    Product Specification

    • Product Code: KLA
    • Customer Offloading: Customer Offloading
    • Diameter: 2010mm
    • HIAB Available: HIAB Available

    People who bought this also bought...

    Klargester Full Retention Separator - 835M² drainage areaKlargester Full Retention Separator - 835M² drainage area
    Klargester Full Retention Separator - 835M² drainage area
    from £1,580.00 ex VAT
    (£1,896.00 inc VAT)
    Klargester Full Retention Separator - 335M² drainage area
    Free Delivery
    Klargester Full Retention Separator - 335M² drainage area
    from £1,057.00 ex VAT
    (£1,268.40 inc VAT)