Featured Products
.png)
Charles Austen Air Blower ET60 AO
(£126.00 inc VAT)
The Charles Austen ET60AO is a linear diaphragm air pump which provides a clean, oil free air source and is ideally suited for outdoor (rainproof) use.
The Charles Austen ET60AO comes with a built-in loss of pressure alarm and an extra output cable for an external beacon.
Applications Include:
Sewage aeration
Aquatic oxygenation
Spas / whirlpools
Water features
Product...
£105.00 ex VAT (£126.00 inc VAT)
Smart Control Panel & Beacon Combo
(£427.20 inc VAT)
Treatment Tank Control Panel (Smart Range)
This New Style Klargester Control Panel for waste water tanks with digital display continuously monitors the internal timetables and operates the appropriate pump/motor outputs according to a timetable entry. The status is shown on the display. The current time continues to be updated internally by battery backup when the mains fail, and the control unit...
£409.44 £356.00 ex VAT (£427.20 inc VAT)
Grid
List
Charles Austen Air Blower ET250
Designed for use in sewage aeration applications, the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture.
Key Features
Green...
ET-250 CHARLES AUSTEN BLOWER SERVICE KIT
ET-250 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-250 Charles Austen Blower service kit for the includes:-
4 Diaphragms
1 Filter
16 Valves
Charles Austen recommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure it's the correct kit for your blower.
JDK-L Connector (60-120)
JDK-L Connector (60-120)
This Secoh JDK Connector is for all models from 60 to 120, it is 3/4 inch in diameter, this part needs to be replaced if showing any signs of damage or cracks. This will help with the longevity of the blower.
3 Pole Isolator Switch
3 Pole Isolator Switch
3 Pole Non Fused lockable Isolator Switch with high impact grey polycarbonate enclosure, UV stabilised to IP66/67, Complete with 1no fuse block
1/2' Clear Braided Hose SOLD PER METRE
1/2' Clear Braided Hose SOLD PER METRE
BioTec P4 to P25 and Airflow 1 to 4.
This is a 1/2 inch clear reinforced hose which can also be used to connect the airlift to the manifold within BioTec P40 and Airflow AF5 upwards.
Sold as a continual length
3/4' Clear Braided Hose SOLD PER METRE
3/4' Clear Braided Hose SOLD PER METRE
3/4" clear braided hose for waste treatment systems.
Sold as a continual length
Biotec P6-P12 500mm Extension
Biotec P6-P12 500mm Extension
Biotec P6-P12 Sewage treatment extension neck
495mm deep
1875mm diameter
50-50 Spray50% Filled Laminate
Thickness: 7mm
Weight: 33.17 35Kg
Aeration Blower Housing Clips
BLOWER HOUSING CATCH/CLIP
If you need a full set of clips, order x4 clips.
These clips match the blower housing on the below link : -
Kingspan Parts Blower Housing (Complete) - Tanks Direct (tanks-direct.co.uk)
Blower Housing (Complete)
Plastic Blower Housing - Complete Unit.
Suitable for P006 - P025 BioTec units.
Contains : -
x1 0701007 - Blower Housing Lid
x1 0701008 - Blower Housing Base
x4 0701009 - Blower Housing Clips.
Please note that if you have the old style of blower housing which needs screwed down, you will need to replace it with the new housing unit.
Blower Box Cover
Blower Box Cover
Suitable for P006 - P025 BioTec units.
Blower Housing Base
BLOWER HOUSING BASE
Base for blower housing - this base is only suitable for the version of the blower housing which clips down. If you have a screw down base, you will need a new blower housing complete.
Dimensions are in the technical drawings.
Diaphragm Set EL120 or EL250
Diaphragm Set EL120 or EL250
This Diaphragm Kit is suitable for Secoh EL (JDK) Blowers.
This kit contains:
2 x EL diaphragms plus their plastic surrounding frame
4 x magnetic spacers to help with reassembly
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
Charles Austen ET60-80 Filter
Charles Austen ET60/ET80 Filter
This filter is suitable for use with the Charles Austen ET60 & ET80 Air Pump.
Your inlet filter should be washed out every 6 months and replaced every year. Failing to do so can reduce the pump's flow up to 30% and cause possible overheating.
Note, these can not be returned once opened. Please make sure it's the correct kit for your blower.
...
Charles Austen Air Blower ET60
The ET60 is a linear diaphragm air pump which provides a clean, oil free air source and is ideally suited for outdoor (rainproof) use.
Applications:
Sewage Aeration
Aquatic Oxygenation
Spas / Whirlpools
Water Features
Product Features
Green drive technology - energy efficient motors so low power consumption
Specially formulated diaphragm material for extended life
Due...
Charles Austen Air Blower ET80
The ET80 is a linear diaphragm air pump which provides a clean, oil free air source and is ideally suited for outdoor (rainproof) use.
Applications:
Sewage Aeration
Aquatic Oxygenation
Spas / Whirlpools
Water Features.
Product Features
Green drive technology - energy efficient motors so low power consumption
Specially formulated diaphragm material for extended...
Charles Austen Air Blower ET100
Designed for use in sewage aeration applications, the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture.
Key Features
Green...
Charles Austen Air Blower ET120
ET-120 Charles Austen Blower
Designed for use in sewage aeration applications, the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture.
Key...
Charles Austen Air Blower ET150
Designed for use in sewage aeration applications, the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture.
Key Features
Green...
Charles Austen Air Blower ET200
Designed for use in sewage aeration applications, the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture.
Key Features
Green...
ET-60 CHARLES AUSTEN BLOWER SERVICE KIT
ET-60 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-60 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen recommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure it's the correct kit for your blower.
ET-80 CHARLES AUSTEN BLOWER SERVICE KIT
ET-80 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-80 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen recommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure it's the correct kit for your blower.
ET-100 CHARLES AUSTEN BLOWER SERVICE KIT
ET-100 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-100 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen recommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure it's the correct kit for your blower.
ET-150 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-150 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
Charles Austen recommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure it's the correct kit for your blower.
ET-200 CHARLES AUSTEN BLOWER SERVICE KIT
ET-200 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-200 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
Charles Austen recommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure it's the correct kit for your blower.
FPZ SCL K04-MS Side Channel Blower
FPZ SCL K04MS P55/90-p150/70 - Large Blower Unit
These blowers are ideal for sewage treatment systems, and pond aeration. Oil-free, pulse-free air at a very low decibel between 58 - 80 dB(A). These blowers can be mounted in any position and are designed with a unique design that channels air into sound-absorbing foam to help minimise noise.
Aluminium alloy construction, High-efficiency impeller,...
FPZ SCL 15DH .37kw BLOWER
SCL 15 DH .37kw BLOWER
These blowers are ideal for sewage treatment systems, pond aeration. Oil-free, pulse-free air at a very low decibel between 58 - 80 dB(A). These blowers can be mounted in any position and are designed with a unique design that channels air into sound absorbing foam to help minimise noise.
Aluminium alloy construction, High efficiency impeller, comes complete with air filter
Single...
FPZ R30-MD Side Channel Blower
FPZ R30-MD Side Channel Blower
The R30-MD FPZ Side Channel Blower is a single impeller “double stage” blower which supersedes the SCL-DH 30 model. A double stage impeller is mounted directly onto the motor shaft for contact-free compression. This blower has a robust aluminium construction.
Product characteristics
1Phase Power
Noise Level: 69.2-72.8 dB
Energy efficient...
Hose Tail Elbow (1/2 BSP 12mm)
Hose Tail Elbow
Hose tail Elbow for Biotec Airlift unit's.
Materials: Blue Tefen Plastic
(1/2 BSP - 12mm)
Hose Tail Elbow (3/4 BSP 19mm)
HOSE TAIL ELBOW (3/4 BSP 19MM)
3/4 Hose tail Elbow for BIOTEC airlift unit's for P018-25
3/4' Hose Joiners
3/4" Hose Joiners
3/4" Hose Joiners used in P018-25 BioTec
Materials: Blue Tefen Plastic
P6-P12 BioTec Access Lid ONLY
P6-P12 BioTec Access Lid ONLY
Klargester BioTec Sewage Treatment Plant Access Lid Only,
Outer lid, sold separately
Dims: Approximately 1735 mm x 425 mm
P18-P25 Klargester Biotec Access Lid Only
Klargester Biotec ( P18-P25) Access Lid Only
Made from a high grade Glass Reinforced Plastic (GRP)
Comes complete with Locks
Seal not required
Dims:- 750mm W x 2525mm L x 50mm D
If a strong effluent smell is coming from the tank, the tank needs to be inspected
Note, keys are sold separate
P6-P12 BioTec Outer Cover ONLY
Klargester BioTec Sewage Treatment Plant Outer Cover P6
Made from Glass Reinforced Plastic
Covered in a green powder coated protective layer
Access cover, sold separately
P18-P25 Klargester Biotec Sewage Treatment Plant Outer Cover
Klargester BioTec Sewage Treatment Plant Outer Cover P18-P25
Biotec P18-P25 Complete cover, including the inner Surfboard style lid, Locks & Keys and Anti-Slip Mats
Made from High grade Glass Reinforced Plastic (GRP)
Green Powder coated protective layer
Seal not required
*Access cover, sold separately
Dims: 2755mm diameter
If a strong effluent smell is coming from the...
P6-P12 BioTec Sewage Treatment Complete Cover
Klargester BioTec Sewage Treatment Complete Cover P6-P12
Complete inner and outer lid for Biotec Sewage treatment systems P6-P12 Only
Made from High grade Glass Reinforced Plastic (GRP)
Green Powder coated protective layer
Complete with Locks
Seal not required
If a strong effluent smell is coming from the tank, the tank needs to be inspected
Klargester Bronze Service Plan (Domestic Tanks Only)
Klargester Bronze Service Plan (Domestic Tanks Only)
Ensure that your Klargester system is properly managed and non-polluting by allowing Kingspan to help you keep your system in good working order. By purchasing a Kingspan Bronze Service plan you will ensure that your system is serviced on an annual basis, our engineers will conduct checks on; system integrity and operation, all moving parts, effluent...
Treatment Tank Control Panel (Smart)
Treatment Tank Control Panel (Smart Range)
This New Style Klargester Control Panel for waste water tanks with digital display continuously monitors the internal timetables and operates the appropriate pump/motor outputs according to a timetable entry. The status is shown on the display. The current time continues to be updated internally by battery backup when the mains fail, and the control unit...
BA-BC Biodisc Smart Alarm kit
BA-BC Biodisc Smart Alarm kit
Suitable for lots of units that need to have a high level alarm - this is great for any Cesspool or Small Pump-chamber to advise when unit is full. Also, a small discharge pump or Air-blower can be wired into this panel.
Kit Includes :-
Control Panel
Low Voltage Beacon
High Level Float Switch
Lose of Rotation
PPFDS pipework
PPFDS Pipework
Hose to allow PPFDS system to connect
Per metre
Proximity / Reed Switch
Proximity Switch (ONLY)
This proximity switch can be used on the Kingspan Klargester Biodisc Units. The switch is located beside the motor gearbox in the tank.
Used in conjunction with the Loss of Rotation magnet. This magnet is located on the rotor and with each rotation both the magnet and switch will contact. Once this cycle is broken the alarm will sound thus signalling the loss of rotation.
If...
Secoh JDK-S-60 - 120 Filter
Secoh JDK-S-60 - 120 Filter
Filter for the Secoh JDK-S 60 - 120 blower range.
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
JDK 150-500 Filter
JDK 150-500 Filter
JDK 150-500 Filter - to suit Secoh JDK Blowers from 150 to 500 range
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
DIAPHRAGM KIT FOR SECOH JDK 60 - 120
DIAPHRAGM SET -JDK 60-120 -
The SE24 Diaphragm Kit is suitable for Secoh JDK 60–120 Blowers, including:
JDK-S-60
JDK-60C
JDK-S-80
JDK-80C
JDK-S-100
JDK-100C
JDK-S-120
JDK-120C
The kit contains:
2x JDK diaphragms, plus their plastic surrounding frame
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part...
SECOH JDK 150 - 500 DIAPHRAGM KIT
DIAPHRAGM SET -JDK 150-500
The SE41 Diaphragm Kit is suitable for Secoh JDK 60–120 Blowers, including:
JDK-S-150
JDK-150C
JDK-S-200
JDK-250C
The kit contains:
2x JDK diaphragms, plus their plastic surrounding frame
Note that the below range requires 2no kits per blower
JDK-S-300
JDK-300C
JDK-S-400
JDK-400C
JDK-S-500
JDK-500C
Note, these...
JDK-Pressure Relief Valve (150-500)
JDK-Pressure Relief Valve (150-500)
This Secoh JDK Pressure Relief Valve can be used with all Secoh JDK Air blowers from 150 to 500. The valve will prolong the lifespan of your air blower and release any excess air to prevent the internal workings of the blower from being damaged.
Original Black Rubber 90 Degree Hose
2 x Spring Clip Retainers
Setting 0.25 bar
Weight 0.5
19 mm ID
21...
SECOH JDK-S-60 Single Series Blower
SECOH JDK-S-60 SINGLE SERIES BLOWER
The JDK models are a direct replacement of the Secoh EL series of blower. They feature up to 30% less energy consumption, as well as being more compact than the EL series.
This model is to be used in the Biosafe/ CLP6 unit, located on the inside of the unit.
Long life expectancy
All parts of the motor are combined into one single construction. The...
SECOH JDK-S-80 Single Series Blower
SECOH JDK-S-80 SINGLE SERIES BLOWER
The JDK models are a direct replacement of the EL series of blower - these also feature up to 30% less energy consumption, as well as being more compact than the EL series.
Long life expectancy
All parts of the motor are combined into one single construction. The combination of a compact and light construction mixed with the uncomplicated mechanism...
SECOH JDK-S-100 Single Series Blower
SECOH JDK-S-100 Single Series Blower
The JDK models are a direct replacement of the EL series of blower - these also feature up to 30% less energy consumption, as well as being more compact than the EL series.
Long life expectancy
All parts of the motor are combined into one single construction. The combination of a compact and light construction mixed with the uncomplicated mechanism guarantee...