ATEX Drum Heater

ATEX Drum Heater - Safe, Efficient heating for Hazardous Zones

An advanced, certified heating solution designed specifically for use in hazardous environments where explosive gases or vapours may be present. Engineered for various sized steel drums, this heater delivers uniform and controlled heat to maintain optimal viscosity, reduce waste, and enhance process efficiency.

Built to ATEX standards (Zone 1 and Zone 2 compliance), the 23–42 combines rugged durability with safety-first engineering, making it an indispensable tool in chemical, pharmaceutical, oil & gas, and manufacturing industries.

Key Features & Benefits

• ATEX-Certified for Hazardous Areas
• High-Performance Heating 
• Robust Industrial Construction
• Built-In Adjustable Thermostat 
• Fast and Efficient
• Easy Installation & Portability 

*Please note the jacket does not come with a Controller, this is an additional option

Typical Applications

• Chemical Processing
• Pharmaceutical Manufacturing
• Oil & Gas Industry
• Food & Beverage
• Paints & Coatings

Technical Specifications

• Nominal Voltage: 230 VAC*
• Nominal Power: 350W, 400W, 800W, 1200W (30L, 60L, 120L, 200L)
• Max. Operating Temperature: +180°C / + 200°C (Steel Drum), + 70°C (Plastic Drum)
• Temperature Class: T6, T5, T4, T3 (depending on temperature setting limiter)
• Electrical Connection Terminal Boxes for Network (EX-e) / Sensor (EX-i)
• Protection Class: IP65/l
• Zones 1/2 (gas); 21/22 (Dust)
• Sensors: 2 x Pt100 (EX-i, EX-e)
• Weight: 4kg, 5kg, 10kg, 12kg (30L, 60L, 120L, 200L)

How it works

The ATEX Drum heater wraps securely around a 30L, 60L, 100, 120L and 200L steel drums. Its flexible heating element transfers radiant heat evenly across the drum surface. A built-in thermostat monitors and maintains the target temperature, preventing overheating and ensuring consistent performance. The ATEX compliance means the unit includes special shielding, grounding, and spark prevention components to eliminate ignition risks.

Frequently Asked Questions (FAQs)

Is this heater suitable for plastic drums?

No. This drum heater is designed specifically for use with steel drums. Using it on plastic could cause deformation or unsafe conditions

What temperature range does it support?

The integrated thermostat typically supports a range of 0°C to 200°C (32°F to 392°F), depending on the model and setup

Can it be used outdoors?

Yes, provided it is shielded from direct water exposure. Always follow manufacturer guidelines for outdoor or exposed use in hazardous zones.

Does this heater require special power connections?

Yes. It must be connected in accordance with ATE X-rated electrical systems, usually using armoured cable and explosion-proof connections

How long does it take to heat a full drum?

This varies based on the drum contents, ambient temperature, and desired final temperature. On average, expect several hours up to several days depending on contents and litres / volume for full viscosity improvement.

What maintenance is required?

Minimal. Inspect the heater regularly for wear and damage. Ensure thermostat calibration and electrical connections meet ATEX standards.

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.