Flood Mate 3 - Emergency Flood Pump Kit

This emergency pumping kit has a powerful pump, two packs of Hydrosacks and discharge hoses for defending a property from low level flooding. Depending on which kit is selected, the pump is designed to pump water levels down to a level of between 3mm and 1mm. Hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency. Supplied in a sturdy easy-carry case, there is sufficient space within to not only store the pumping equipment but keep other flood protection products e.g. emergency grab bags, emergency meals etc.

Flood Mate 3 Kit Contains:

WX10 Pump

Phase 1 hose kit: 10 metres of 25mm (1') non-kink pipe with quick release connectors. Ideal for pumping near the property e,g. over window ledges, steps, walls, Hydrosacks, sandbags etc.

Phase 2 hose kit: 10 metres of 25mm (1') lay-flat pipe with quick release connectors.Ideal for pumping over flat surfaces e.g. over ground, away from the property.

2 Hydrosacks.

Easy carry case with lid and 2 fastening straps (400Wx600Lx 420H).

WX10 Pump Information
Honda engine driven pump, with a 1.5HP engine and weighs 6.1kgs (dry). This is supplied with a quick release discharge connector, a 4 metre, quick release suction hose, and a low level suction tool. It will pump approximately 80 litres per minute across 30 metres of level ground with a 1metre incline, when using 25mm (1') hose. Initial priming of the pump with water is required before starting. It will pump water down to 3mm, but it must not run dry. Ideal for use when electricity is not available.

FAQs »

View other products in Flood kits »